On 9 Jul 2008, at 18:49, William Waites wrote:
Le 08-07-09 à 19:36, Ariel Biener a écrit :
I have been pondering over this issue for some time now (not too much
time to invest on it), since I wanted to created a duplicate model
of our
production network in a test environment, not connected
Le 08-07-09 à 19:36, Ariel Biener a écrit :
I have been pondering over this issue for some time now (not too much
time to invest on it), since I wanted to created a duplicate model
of our
production network in a test environment, not connected to any outside
network (thus cannot peer, same p
On Wednesday 09 July 2008 18:26, Howard Jones wrote:
> I've done this in the (distant) past by taking the output from 'show ip
> route' from one of our live transit routers, and awking it into a load
> of 'route add' commands on a spare FreeBSD box. Run quagga on that, and
> hook it into your te
Jason Lewis wrote:
> I'm building a BGP test network and I'd like to replicate a full route
> table on a few of my routers. I thought I might be able to use Quagga
> and insert a rib dump, but I'm not finding a lot of info on if it's
> possible. (I've pinged the quagga list and didn't get any res
http://www.neustar.biz
GPG Key ID: 0xB5E3803D
- Original Message -
From: Borchers, Mark M. <[EMAIL PROTECTED]>
To: NANOG list
Sent: Wed Jul 09 11:01:53 2008
Subject: RE: Building a BGP test network
Do you have access to an Adtech or equivalent tester? Our AX4000 has the
ability to fak
Jason Lewis wrote:
I'm building a BGP test network and I'd like to replicate a full route
table on a few of my routers. I thought I might be able to use Quagga
and insert a rib dump, but I'm not finding a lot of info on if it's
possible. (I've pinged the quagga list and didn't get any respons
5 AM
> To: NANOG list
> Subject: Re: Building a BGP test network
>
>
> I should clarify that my test network is not connected to the Internet
> or any other network. I would normally just peer and get the
> table, but
> I don't have that ability. I'm open to anythi
I should clarify that my test network is not connected to the Internet
or any other network. I would normally just peer and get the table, but
I don't have that ability. I'm open to anything that could act like a
BGP router where I could feed it an existing RIB.
Jason Lewis wrote:
I'm build
Jas,
hi check this thread, you might be able to talk with the same guy.
http://www.ripe.net/ripe/maillists/archives/routing-wg/1999/msg00107.html
goodluck,
-b
On Wed, Jul 9, 2008 at 8:29 AM, Jason Lewis <[EMAIL PROTECTED]> wrote:
> I'm building a BGP test network and I'd like to replicate
9 matches
Mail list logo
