On 9 Jul 2008, at 18:49, William Waites wrote:
Le 08-07-09 à 19:36, Ariel Biener a écrit :
I have been pondering over this issue for some time now (not too much
time to invest on it), since I wanted to created a duplicate model
of our
production network in a test environment, not connected
Le 08-07-09 à 19:36, Ariel Biener a écrit :
I have been pondering over this issue for some time now (not too much
time to invest on it), since I wanted to created a duplicate model
of our
production network in a test environment, not connected to any outside
network (thus cannot peer, same p
On Wednesday 09 July 2008 18:26, Howard Jones wrote:
> I've done this in the (distant) past by taking the output from 'show ip
> route' from one of our live transit routers, and awking it into a load
> of 'route add' commands on a spare FreeBSD box. Run quagga on that, and
> hook it into your te
Jason Lewis wrote:
> I'm building a BGP test network and I'd like to replicate a full route
> table on a few of my routers. I thought I might be able to use Quagga
> and insert a rib dump, but I'm not finding a lot of info on if it's
> possible. (I've ping
http://www.neustar.biz
GPG Key ID: 0xB5E3803D
- Original Message -
From: Borchers, Mark M. <[EMAIL PROTECTED]>
To: NANOG list
Sent: Wed Jul 09 11:01:53 2008
Subject: RE: Building a BGP test network
Do you have access to an Adtech or equivalent tester? Our AX4000 has the
ability to fak
Jason Lewis wrote:
I'm building a BGP test network and I'd like to replicate a full route
table on a few of my routers. I thought I might be able to use Quagga
and insert a rib dump, but I'm not finding a lot of info on if it's
possible. (I've pinged the quagg
5 AM
> To: NANOG list
> Subject: Re: Building a BGP test network
>
>
> I should clarify that my test network is not connected to the Internet
> or any other network. I would normally just peer and get the
> table, but
> I don't have that ability. I'm open to anythi
wrote:
I'm building a BGP test network and I'd like to replicate a full route
table on a few of my routers. I thought I might be able to use Quagga
and insert a rib dump, but I'm not finding a lot of info on if it's
possible. (I've pinged the quagga list and didn't get
Jas,
hi check this thread, you might be able to talk with the same guy.
http://www.ripe.net/ripe/maillists/archives/routing-wg/1999/msg00107.html
goodluck,
-b
On Wed, Jul 9, 2008 at 8:29 AM, Jason Lewis <[EMAIL PROTECTED]> wrote:
> I'm building a BGP test network and I'
I'm building a BGP test network and I'd like to replicate a full route
table on a few of my routers. I thought I might be able to use Quagga
and insert a rib dump, but I'm not finding a lot of info on if it's
possible. (I've pinged the quagga list and didn't get
10 matches
Mail list logo
