[Please keep me CC'ed or I probably won't see replies in a timely
fashion! And if this is more appropriate for the -dev list, please
either forward or tell me and I'll forward. Tnx.]
I've been installing a two-machine MythTV setup based on KnoppMyth
R5A22, and I've been running into problems tha
I have one more data point: I took one of the recordings I made and
copied it to another machine. (E.g., I just scp'ed one of the .nuv
files from /myth/tv elsewhere.) mplayer plays the video just fine, and
-claims- that there's audio there (filter chain 48000Hz/2ch/16bit),
but I hear nothing. P
Date: Tue, 01 Nov 2005 15:16:07 -0500
From: "Michael T. Dean" <[EMAIL PROTECTED]>
[EMAIL PROTECTED] wrote:
>I have one more data point: I took one of the recordings I made and
>copied it to another machine. (E.g., I just scp'ed one of the .nuv
>files from /myth/tv elsewh
[I'm crossposting this to ivtv-users, since this seems to be some
really bad interaction between Myth & ivtv and I have no idea whether
the bug is in one or shared across the two; I hope doing so is kosher.]
[I'm also posting this in two pieces to save moderator work; all the
logs at the end make t
[ REST OF LOGS FROM PART 1 ]
[dmesg data---left the whole boot in just in case it matters; just
search for the IVTV header:]
[EMAIL PROTECTED]:/myth/tv$ cat /var/log/dmesg
Linux version 2.6.13.2-chw-3 ([EMAIL PROTECTED]) (gcc version 3.3.6 (Debian
1:3.3.6-5)) #1 SMP Wed Sep 21 08:15:54 PDT 2005
Spammers are picking up on addresses from these lists ultra-fast---
I just got one of the zillions of bogus ebay-acct-susp messages I've
been seeing for months sent to this brand-new address. I don't know
if either list is trying to obsfuscate address in their archives, or if
they're gatewayed to
So does anyone---anyone at all---have -any- clues for me on why trying
to record from multiple tuners crashes so badly for me? I've been
dead in the water for a week on this problem, essentially, and it was
only after many days of banging my head against the problem that I
finally sent mail here.
Oh, and one more data point:
I tried scheduling a 10-minute recording on ch2 for 11:30-11:40,
and a 10-minute recording on ch4 for 11:35-11:45.
The first 5 minutes of the ch2 recording are fine.
At 11:35, -BOTH- recordings started recording ch4!
(And the one that started earlier showed a period
It's like Myth (or something) is losing track of which card is which
and is just always using tuner 0. [In fact, my first test like this
showed ch4 in the second half of the "ch2" file and ch4 in the ch4
file; my second test was to unplug the RF-in from all but the first of
the
SOLVED! (And man, somebody ain't gonna like -this-... :)
It turns out I just tried installing KnoppMyth R5A16 as a quick test,
before trying out Ubuntu Breezy as a Myth distro, since I was about
to give up on R5A22. And I hit exactly the same problem, which was...
remarkable, considering how dif
Date: Fri, 04 Nov 2005 00:42:15 +0100
From: Rudy Zijlstra <[EMAIL PROTECTED]>
Can you send us the content of your capturecard table?
If you're going where I think you're going with this, you win the
insight prize. See my previous message to the list. It's a pity
I didn't hear this
Date: Fri, 04 Nov 2005 00:42:15 +0100
From: Rudy Zijlstra <[EMAIL PROTECTED]>
Can you send us the content of your capturecard table?
[In particular, I assume that the contents of that table would reveal
multiple card allocations to identical devnumbers, which I -finally-
diagnosed a
I've spent a while installing and reinstalling MythTV recently.
It's got a lot of usability problems. Fixing them would help lots
of people.
This analysis is based on KnoppMyth R5A22, but I'm reasonably certain
that only some of them are actually KnoppMyth bugs specifically; many
of them are prob
Date: Fri, 04 Nov 2005 04:36:58 GMT
From: [EMAIL PROTECTED]
:? Dude, you've describe nothing about "MyhtTV Installer" in this thread.
Issues w/ KnoppMyth should be posted KnoppMyth forum and NOT on the MythTV
mailing list.
[As I just said over on the forum, paraphrasing...
Date: Fri, 4 Nov 2005 00:47:42 -0500
From: Dewey Smolka <[EMAIL PROTECTED]>
Just a meta-comment here: If you dismiss every possible complaint
with, "you're a moron for even suggesting that this is a problem,"
then, no, I guess there are no bugs here. But let's assume that,
despite appear
...nd, back to my least-favorite form: Capture Cards.
Here I am, sitting in Capture Cards in my misconfigured R5A22:
Capture cards
(New capture card)
[ MPEG : /dev/video0 ]
[ MPEG : /dev/video0 ]
[ MPEG : /dev/video0 ]
[ MPEG : /dev/video0 ]
[ MPEG : /dev/video0 ]
Date: Fri, 04 Nov 2005 18:32:51 +1000
From: ffrr <[EMAIL PROTECTED]>
Is this because the ringbuffer file seems to continually grow? I have
noticed this. Why does it do that? If you are not paused, surely the
file size should remain stable?
Yes. The ringbuffer grows monoto
Date: Fri, 04 Nov 2005 18:32:51 +1000
From: ffrr <[EMAIL PROTECTED]>
Is this because the ringbuffer file seems to continually grow? I have
noticed this. Why does it do that? If you are not paused, surely the
file size should remain stable?
Yes. The
Date: Fri, 4 Nov 2005 10:27:36 -0600
From: Josh Burks <[EMAIL PROTECTED]>
Then why aren't you the one fixing these "problems". For as much
effort that you put into your posts to this list, you could have
rewritten all the code/bugs you're constantly complaining about.
Are you
Date: Fri, 4 Nov 2005 09:55:53 -0500
From: Dewey Smolka <[EMAIL PROTECTED]>
Also you're going a bit scattershot with issues that are
specific to MythTV, specific to Knoppmyth, specific to Knoppix-Debian,
and specific to your hardware without really thinking about the
Date: Fri, 4 Nov 2005 13:15:07 -0500
From: Isaac Richards <[EMAIL PROTECTED]>
On Friday 04 November 2005 01:09 pm, R. Geoffrey Newbury wrote:
> On Fri, 4 Nov 2005 00:33:41 -0500 (EST), [EMAIL PROTECTED] wrote:
> >Date: Fri, 04 Nov 2005 04:36:58 GMT
> >From: [EMAIL P
Well, this is new & different.
So after my little debacle with Capture Cards, and discovering
(for example) that there's no way to DELETE a single card from
the list without nuking ALL of them and starting over (geez,
what happens if somebody moves a card to a different machine?
guess they just de
Date: Fri, 4 Nov 2005 17:07:41 -0400
From: Greg Estabrooks <[EMAIL PROTECTED]>
> (for example) that there's no way to DELETE a single card from
I'm pretty sure that you can just Highlight the card and hit Menu (M).
Then pick delete.
Such a pity, then that the UI gave me NO
Date: Fri, 4 Nov 2005 17:01:42 -0500
From: Isaac Richards <[EMAIL PROTECTED]>
I will repeat: You, sir, are way, WAY too close to the problem.
You have no conception of what it's like to be a first-time user.
Therefore, your opinions on what's "obvious" or "easy" are not to
be trusted.
Date: Fri, 4 Nov 2005 16:45:55 -0600
From: Josh Burks <[EMAIL PROTECTED]>
On 11/4/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Maybe you should ask for your money back... :)
Maybe I should ask for my -time- back. Pity I spent all this money
on this pile o' hardware over
Date: Fri, 4 Nov 2005 17:14:54 -0600
From: Josh Burks <[EMAIL PROTECTED]>
Maybe you should take your complaints to the -dev list
I've been reluctant to send mail there, since I'm not a Myth
developer. Some developer groups are very protective of their
list bandwidth, and I'm unsure o
Date: Fri, 04 Nov 05 18:32:16 -0500
From: "R. Geoffrey Newbury" <[EMAIL PROTECTED]>
>(b) I went into Schedule Recordings -> Manual Schedule and wasted
>my time setting up 4 simultaneous recordings 5 minutes into the
>future, only to discover in "Upcoming Recordings" tha
Date: Fri, 4 Nov 2005 19:39:54 -0400
From: Greg Estabrooks <[EMAIL PROTECTED]>
> Are there other commands besides M? Where are they documented?
Various Howtos, keys.txt and god knows where else.
That's kinda the problem :) Too many sources, some of which are
dated. It's the p
Date: Fri, 4 Nov 2005 20:04:50 -0400
From: Greg Estabrooks <[EMAIL PROTECTED]>
> Currently, MythTV's configuration system looks like the "Bad Example"
> section of any book on user interface design. Class, let's review:
Then get to it, or try to encourage those who have the
Date: Fri, 4 Nov 2005 22:06:32 -0500
From: Isaac Richards <[EMAIL PROTECTED]>
You got 'burned' because you didn't even _look_ at the capture card list
after
setting up any of your cards. All the device paths that have been setup
are
on that list. They're also in the input
Date: Fri, 4 Nov 2005 22:43:55 -0500
From: Isaac Richards <[EMAIL PROTECTED]>
On Friday 04 November 2005 10:21 pm, [EMAIL PROTECTED] wrote:
> Date: Fri, 4 Nov 2005 22:06:32 -0500
> From: Isaac Richards <[EMAIL PROTECTED]>
>
> You got 'burned' because you did
Date: Wed, 23 Nov 2005 12:33:22 -0500
From: Erik Karlin <[EMAIL PROTECTED]>
you could just hijack the channel change "script" functionality and
create a user job when the recording completes. The problem of
back-to-back recordings is still possible. maybe some clever file
l
Date: Tue, 29 Nov 2005 18:01:40 -0500
From: "Michael T. Dean" <[EMAIL PROTECTED]>
Nope. It's never worked the way you're theorizing. There's something
more going on that you didn't notice. Are you sure the Good Eats
episodes were back to back?
It would, however, be seriou
I've got a two-machine MBE/SBE setup running 1.18.1. (The SBE is
also being used as my FE; the SBE's NFS-mounts its video-storage
dir on the MBE and hence stores its video there.)
I've noticed that if I have to reboot the MBE, then even after it's
come back up, and even after "mysqladmin ping" fr
Date: Wed, 30 Nov 2005 01:15:05 -0800
From: Cecil Watson <[EMAIL PROTECTED]>
All you need to do is restart the backend on the SBE...
Sure. But I'm surprised that the two ends of the connection can't
recover on their own. (They -almost- do, since the UI recovers,
albeit ungracefully,
I'm about to repartition, leaving everything except recordings in an
ext3fs partition, and putting all recordings into JFS. But I'd rather
not discover that I've made the ext3 too small, and I'd rather not
waste gigs making it too big.
The only thing I have no idea about is whether the mysql data
Perfect; that's fairly slow growth. Thanks!
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I've been thinking about this issue quite a bit recently. I have half
of a solution but need a little bit of advice on how to make it a
whole solution; if even one person has an idea about how to address
each of 3-4 problem areas, I can put together the pieces and post it
back for everyone to use.
Date: Thu, 01 Dec 2005 12:54:44 +0800
From: "W.Kenworthy" <[EMAIL PROTECTED]>
Use LVM.
Yes, I know about LVM, but it doesn't solve my problem, because the
-filesystems- can't be easily resized. (ext3 is easy; it can grow and
shrink. One of JFS or XFS [I can't recall which] can onl
Date: Thu, 1 Dec 2005 15:17:53 -0800
From: andrew matthews <[EMAIL PROTECTED]>
I use XFS it can be both grown and shrunk.
My manpages and google both seem to disagree with you; neither
xfs_growfs nor xfs_admin claim to be able to do this. If you've
successfully shrunken an XFS filesy
In mythtv 1.18.1, using mythweb:
Trying to schedule a manual recording is... peculiar. I've done some
searching but haven't been able to unearth any reports about this, but
perhaps I'm just looking in the wrong place.
If I click on "Manually Schedule", adjust the start time to be a
minute or tw
While I'm poking at mythweb...
If I'm surveying my already-recorded programs, and click on one of the
thumbnails, mythweb currently tries to send the .nuv (really mpeg)
file directly to my browser, which is running on my desktop machine
[not a Myth box]. Firefox has no idea what to -do- with the
Date: Thu, 1 Dec 2005 23:09:02 -0500
From: Chris Ribe <[EMAIL PROTECTED]>
MythWiFi is what you are looking for. Search for it.
Huh. I'd -never- have guessed from the name; I assumed that was some
sort of bandwidth-scrunching thing for people who wanted to stream
video over 802.11. T
Date: Thu, 1 Dec 2005 22:48:24 -0700
From: Chad <[EMAIL PROTECTED]>
You -could- use jump points.
You -could- be quite clever :)
I'm not sure this will work, but it might get me somewhat closer.
I take it your idea is to set a jump point to the Watch Recordings
page, and then infer ho
Date: Fri, 2 Dec 2005 17:35:10 -0500
From: Chris Ribe <[EMAIL PROTECTED]>
Out of curiosity, what is your goal here?
[See my next reply (to Kuphal).]
If you don't need the myth interface, something along the lines of typing
"mplayer filename" should get the job done.
That's a
Date: Fri, 02 Dec 2005 16:40:28 -0600
From: Kevin Kuphal <[EMAIL PROTECTED]>
No, there is no facility in Myth to send playback commands to a frontend
to make it play something. The closest are the MythWifi type
applications that let you send remote keypresses to the frontend
Date: Fri, 2 Dec 2005 19:37:35 -0500
From: Dewey Smolka <[EMAIL PROTECTED]>
I don't know if this is what you're looking for, but I use Xvnc to
control a FE remotely (you'll probably have to install but it's no
problem). From your remote machine, ssh into the Myth machine you wa
Date: Sat, 03 Dec 2005 02:25:16 -0500
From: "Michael T. Dean" <[EMAIL PROTECTED]>
You should execute it as the same user running X.
Oh duh! I -told- you I was being dumb. :) Thanks.
Yeah, doing that (and either inhibiting X forwarding or undoing it)
worked just fine. mplayer play
Date: Sat, 3 Dec 2005 03:05:05 -0500 (EST)
From: [EMAIL PROTECTED]
(I may have to diddle around with what -size- it tries to render
to, but hopefully that won't be too much of a pain and hopefully
the xv inside ivtv can scale fast enough on this AMD 2800+.
Yup, -fs does the ri
In 1.18.1:
I'm having problems transcoding. I've got an MBE/SBE setup with
several 250's in the BE and one 350 in the SBE/FE. Commflagging
is set to begin immediately upon episode start. I've been trying
to see how I like MPEG4 transcoding from the MPEG2 being produced
by the 250's, but I can't
In 1.18.1:
I'm trying to figure out if I can load-balance commflagging. I've got
an MBE/SBE setup with 5 250's in the BE and one 350 in the SBE/FE.
Commflagging is set to begin immediately upon episode start. I'd like
to run commflagging as soon as possible, in parallel as much as
possible, sinc
Date: Tue, 6 Dec 2005 19:02:09 -0500 (EST)
From: "Chris Pinkham" <[EMAIL PROTECTED]>
> (a) The setup page that deals with running jobs tops out at 5, e.g., I
> can't tell myth to schedule more than 5 jobs in parallel because
> the control just won't go any higher. Why'
Date: Tue, 6 Dec 2005 19:02:09 -0500 (EST)
From: "Chris Pinkham" <[EMAIL PROTECTED]>
> (b) Possibly because of (a), if I do a test recording of 6 things
> simultaneously, commflagging only happens on 5 of them at once.
> The 6th waits until the others are done, and then
Date: Tue, 6 Dec 2005 23:18:02 -0500 (EST)
From: "Chris Pinkham" <[EMAIL PROTECTED]>
> The Max of 5 simultaneous jobs (per backend) was set prior to the
> creation of realtime flagging. With realtime flagging and hardware
> might be willing to try recompiling from 1.8
Date: Tue, 6 Dec 2005 23:42:00 -0500 (EST)
From: [EMAIL PROTECTED]
-Now- what happens is the following:
(a) The instant recording was due to commence, the backend logged a
bunch of "Skipping "Flag Commercials" job for chanid 1002 @
20051206213500, should be run on '
In 0.18.1:
I'm experimenting with transcoding from MPEG2 to MPEG4, and have
discovered that the transcoded files have very low audio levels;
I'd guess on the order of 6-9dB down from the source, at least.
Where are these levels specified? I'm quite surprised that they're
affected at all.
I'm us
Date: Wed, 7 Dec 2005 09:32:10 -0700
From: "Dave Packham" <[EMAIL PROTECTED]>
Any way to detect good signal? I have seen a lot of software that will
stop capture on BAD signal or snow
Can you be more specific about this? I asked a few days ago if anyone
had any ideas on how to d
Date: Mon, 5 Dec 2005 15:22:22 +0100
From: Chris Rouch <[EMAIL PROTECTED]>
> P.S. Is there an easy tool of producing a series of thumbnails of
> every scene change from a section of video? (Or perhaps just a single
> frame from every n minutes, regardless of scenes.) That wo
[Should I move this to the -dev list? This seems like a bug, and
nobody here has said anything about it yet I'll move it to -dev
and/or just open up a ticket if I don't hear anything.]
Note: I found the "Volume %" slider in Transcode->MPEG2->Audio Quality
and changed it from 90% to 100%. I
[Should I move this to -dev and/or open a ticket? I think I found
a bug. Is there any point to bug-reporting 0.18.1, since SVN has
diverged so far from it at this point?]
I have new data. But I'd still -really- love it if somebody, anybody
could answer any subset of the questions at the very bo
In 0.18.1:
I'd like to do commflagging and transcoding from MEGP2->MPEG4.
I was originally thinking that I needed to commflag first, then
transcode, but the behavior of Myth when I try (it does both at
once, or tries to), makes me wonder if I need to worry about this
ordering at all.
So does comm
In 0.18.1, ivtv 0.4.1:
I'm convinced I'm doing something dumb, but I can't see it.
I'm trying to set up a PVR-250 such that it can record from either
analog cable via its RF-in, or from digital cable via its composite
input, which is connected to a cable box. I defined two different
lineups at z
Date: Fri, 9 Dec 2005 16:58:53 -0800
From: Jeff Clemens <[EMAIL PROTECTED]>
I think I figured out the remote system problem. I wasn't aware that you
don't need to run a database on the remote system. Once I turned that off,
and re set everything up between the master and slav
Date: Fri, 9 Dec 2005 11:00:43 +
From: Nick <[EMAIL PROTECTED]>
Also, when setting up a PVR-x50, the correct input (S-Video or
composite) is not always necessarily #0 for the first card.
Indeed; it seems that on my -250's, the card's built-in input is
Composite 4 in myth, and
Date: Fri, 9 Dec 2005 21:39:47 -0500
From: Sasha Z <[EMAIL PROTECTED]>
Are you sure you guys aren't experiencing the same problems as I am in
this thread?
http://www.gossamer-threads.com/lists/mythtv/users/164194
Well, I don't think -I- am. The only time I've noticed that th
In 0.18.1, in Ubuntu Breezy:
I've just discovered that mythtranscode is producing files that cause
my mplayer to explode. (I'm running mplayer on my frontend right over
the display being produced by mythfrontend on the PVR-350 there; the
explosion apparently nukes the entire login session, becaus
In 0.18.1:
Since I've been experimenting with transcoding, I've built up a couple
dozen jobs that mythweb all claims to be in "Errored" state. Some of
these are more than a week old. Not only is this annoying to see
there, but running "mythbackend -v all" is getting tedious, since
it mentions 60
Date: Sat, 10 Dec 2005 00:34:56 -0800
From: Jarod Wilson <[EMAIL PROTECTED]>
On Saturday 10 December 2005 00:19, [EMAIL PROTECTED] wrote:
> In 0.18.1:
>
> Since I've been experimenting with transcoding, I've built up a couple
> dozen jobs that mythweb all claims to be i
In 0.18.1:
[Is this fixed in SVN, given its complete rearchitecture of how
LiveTV works? I'm not running SVN, so I can't easily check.]
I've got a PVR-350 on an SBE/FE, and some PVR-250's on the MBE.
One of the 250's has a composite input hooked to a cable box;
all of the x50's have the same RF
Date: Sat, 10 Dec 2005 09:04:46 -0800
From: Jarod Wilson <[EMAIL PROTECTED]>
I seem to recall either the select or menu button on my remote popping a
dialog that let me delete jobs. Of course, now I try that just now, looking
at some jobs that recently ran to completion, and al
Date: Sat, 10 Dec 2005 23:37:01 -0700
From: "Mike Grusin" <[EMAIL PROTECTED]>
I do the same thing; record in MP2 and transcode to MP4. I vaguely remember
trying to comflag first and then transcode, and remember having some
problems (perhaps it forget the comflag information?).
Date: Sun, 11 Dec 2005 11:20:05 +
From: Piers Kittel <[EMAIL PROTECTED]>
Hello all,
As I'm deaf, I require to watch TV with subtitles - there's no choice
for me really. Anyway, I'm using MythTV taken from SVN only so I can
have subtitle support which 0.18.1 doesn't
Date: Sun, 11 Dec 2005 11:20:05 +
From: Piers Kittel <[EMAIL PROTECTED]>
Hello all,
As I'm deaf, I require to watch TV with subtitles - there's no choice
for me really. Anyway, I'm using MythTV taken from SVN only so I can
have subtitle support which 0.18.1 doesn't
Date: Mon, 12 Dec 2005 20:50:27 -0500
From: "Michael T. Dean" <[EMAIL PROTECTED]>
>, but I
>haven't (yet) tested this thoroughly to see which way it works.)
>Would unchecking that option allow LiveTV to grab the appropriate
>input from any card, or is this just an architect
Date: Thu, 5 Jan 2006 17:29:30 -0500
From: Steve Adeff <[EMAIL PROTECTED]>
On Thursday 05 January 2006 17:11, Jay Ung wrote:
> I was wondering if it iis possible to transcode .nuv to avi on a machine
> that is not a mythtv machine using nuvexport.I am a total noob when it
In 0.18.1:
In the program_detail page, is there an easy way of also displaying
the episode number, for cases in which that data is available? Some
channels often don't have real titles for their shows, or don't make
it clear that there are two parts with identical titles but different
episode num
Date: Fri, 6 Jan 2006 00:13:03 -0500 (EST)
From: "Chris Pinkham" <[EMAIL PROTECTED]>
> (a) The SBE's mythtranscode was getting handed myth:// "URLs" instead
> of just a pointer into the filesystem, then complained that it didn't
> support that mode. Jobs on the MBE ran fine, b
It occurs to me that transcoded files play through the soundcard,
whereas untranscoded ones play through the 350's outputs (and then
through the soundcard). I wonder if there's some inconsistency there
that's making transcoded files sound softer. I'll probably have to
try playing some untranscode
Date: Thu, 05 Jan 2006 22:38:44 -0800
From: Chris Petersen <[EMAIL PROTECTED]>
Done. I don't use the frontend for much other than watching an
occasional show and cutting commercials -- didn't really know what the
details page looked like and what info was available.
Thanks!
Date: Thu, 29 Dec 2005 11:13:42 -0500
From: "Michael T. Dean" <[EMAIL PROTECTED]>
>>I have a 10 minute extra recording delay set as the default.
This is a global pre-/post-roll. It is not meant to be used as an
"always record this much before/after"--it's supposed to be set
Date: Fri, 06 Jan 2006 00:26:57 -0800
From: Chris Petersen <[EMAIL PROTECTED]>
> Thanks! I assume it'd be fairly easy for me to look at the SVN patch
> and backport to 18.1? (SVN is too unstable for me, and I haven't yet
> looked carefully at how mythweb has changed between t
I suspect that the answer to this question is, "Don't do that, then,"
but in case anyone has any suggestions:
I was doing a load test. Configuration is 18.1, with an MBE w/5 250's
and an SBE that NFS-mounts the MBE's recording directory, with 1 350.
CPU's are AMD 2800+'s, 512MB RAM, 100baseT ethe
I've just noticed that, when rebooting the master backend machine,
mysql gets shut down before the backend (because, of course, "mysql"
sorts before "mythbackend" and typically they're both started/stopped
w/the same two-digit priority in the rc scripts). This causes the
backend (if it's logging v
Date: Tue, 10 Jan 2006 05:46:17 -0500 (EST)
From: "Chris Pinkham" <[EMAIL PROTECTED]>
> > I've just noticed that, when rebooting the master backend machine,
> > mysql gets shut down before the backend (because, of course, "mysql"
> > sorts before "mythbackend" and typically the
> Date: Tue, 10 Jan 2006 16:18:51 -0600
> From: Kevin Kuphal <[EMAIL PROTECTED]>
> Common sense says that all applications accessing the DB should be shut
> down cleanly before shutting down the database.
Yes, that's exactly my take on it. But before going to the effort
of makin
Date: Tue, 10 Jan 2006 16:50:07 -0800
From: John Biundo <[EMAIL PROTECTED]>
Hi all.
I've got mythtv starting up automatically upon boot (by running
mythfrontend in user mythtv's .xsession). No problem there.
But when my wife/kids exit from the top menu by mistake (one t
> Date: Wed, 11 Jan 2006 20:51:16 +0100
> From: MagicITX <[EMAIL PROTECTED]>
> The 250 is going away.
Can you provide a cite for this? I don't see anything about it going
away on Hauppauge's website.
___
mythtv-users mailing list
mythtv-use
> Date: Wed, 11 Jan 2006 14:31:36 -0500
> From: "Michael T. Dean" <[EMAIL PROTECTED]>
> The 150 is a better card (it even has a potential to give a better
> picture quality than the 250) and saves you money.
bmayland (CC'ed) started a thread on 15 June 2005 showing dramatic
diffe
> Date: Wed, 11 Jan 2006 12:38:56 -0500
> From: Steve Adeff <[EMAIL PROTECTED]>
> On Wednesday 11 January 2006 10:12, [EMAIL PROTECTED] wrote:
> > After I posted the message, however, I started reading about SPDIF
> > and digital audio IO. Looks like my 7NIF2 lacks the SPDIF h
Date: Wed, 11 Jan 2006 17:11:10 -0600
From: [EMAIL PROTECTED]
On Wed, Jan 11, 2006 at 04:58:36PM -0500, [EMAIL PROTECTED]
wrote:
> Eh? If he's sending digital information down the coax, then no
> amount of ground hum will be audible at the receiver, until the
> hum is
> Date: Wed, 11 Jan 2006 21:11:05 -0500
> From: Steve Adeff <[EMAIL PROTECTED]>
> you've obvously not deallt much with audio equipment ground problems.
...except, perhaps, in my days doing live audio work for theaters. :)
[Aha! I think you said this because I was careless in my phras
I just noticed a peculiar situation:
Running 18.1. MBE has several 250's with ivtv 0.4.1-r1. SBE/FE has
1 350 with ivtv 0.4.0. LiveTV uses the 350 because I have "avoid
conflicts" checked and the 350 is in the FE. Cable feed is split
across all of them into their RF inputs. Everything is gett
> Date: Thu, 12 Jan 2006 05:02:33 -0500 (EST)
> From: [EMAIL PROTECTED]
> (And it won't stick! Changing channels or leaving LiveTV is fine,
> but reentering LiveTV bashes the register back to 58950! Is there
> any way to make this stick, as a workaround?)]
...and before anyo
> Date: Thu, 12 Jan 2006 12:19:45 +
> From: Ant Daniel <[EMAIL PROTECTED]>
> From my reading of the ivtv list I know that there are differences
> between sound levels of 150/500 & 250/350 but I thought that the
> 250/350 was consistent.
Apparently not. See below.
> I
I got mail back from Bryan about his results in comparing the 150 to
the 250; see the two messages below.
- - - Begin forwarded message - - -
Date: Thu, 12 Jan 2006 10:54:16 -0500
From: Bryan Mayland <[EMAIL PROTECTED]>
[EMAIL PROTECTED] wrote:
> > Date: Wed, 11 Jan 2006 14:31:36 -0500
>
Date: Sat, 14 Jan 2006 19:57:50 -0500
From: "R. G. Newbury" <[EMAIL PROTECTED]>
This piece of advice in the wiki is (now) backwards:
"There is work at the moment to merge these conflicting versions, but in
the meantime the kernel version has to go:"
Can you double-check (fro
> Date: Sun, 15 Jan 2006 14:21:16 -0500
> From: "Tom E. Craddock Jr." <[EMAIL PROTECTED]>
> Jens Baumeister wrote:
> > Hi,
> >
> > since the LiveTV changes seem to lead to questions again and again
> > (and sometimes to flamewars), I volunteer to write an FAQ about it.
> Date: Sun, 15 Jan 2006 23:29:39 -0500
> From: Steve Adeff <[EMAIL PROTECTED]>
> http://www.mythtv.org/wiki/index.php/Main_Page
...and your point is...?
If you were trying to say, "there's already a centralized place where
this info can go," I never said there wasn't, and I don't th
I noticed recently that my 18.1 Myth had a mix of 480x480 and 720x480
resolutions for the Default/LiveTV/High/Low capture resolutions. I'm
using 250's & 350's (no HD) from an NTSC cable feed, and I tried
changing all four of Default/LiveTV/High/Low to 480x480, doing a
1-minute recording, and then
> Date: Tue, 17 Jan 2006 23:20:40 -0600
> From: Meatwad <[EMAIL PROTECTED]>
All excellent points! Only one question:
> - If same circuit is not possible, try moving all HT equipment to
> circuits fed from the same side of the panel if you have 120Vac mains.
Are you trying to sa
1 - 100 of 115 matches
Mail list logo
