Hey David,
> > Could you clone and build the following libqmi branch?
> > https://gitlab.freedesktop.org/mobile-broadband/libqmi/-/merge_requests/115
> >
> > Once you have it, you'll be able to configure the NMEA traces via qmicli,
> > e.g.:
> > $ sudo qmicli -d /dev/cdc-wdm1 -p --loc-set-nmea-ty
Hey,
> > > > > > Then we need to debug why we were not able to get any LOC indication
> > > > > > with NMEA traces in David's setup.
> > > > >
> > > > > > David, could you retry to setup the location using the QMI protocol
> > > > > > (i.e. without your changes) but enabling both "nmea" and "raw"
Hi Aleksander,
Il giorno gio 7 mag 2020 alle ore 17:45 Aleksander Morgado
ha scritto:
>
> Hey Daniele,
>
> > > > > Then we need to debug why we were not able to get any LOC indication
> > > > > with NMEA traces in David's setup.
> > > >
> > > > > David, could you retry to setup the location using
Hi Aleksander,
Thanks @Daniele for the feedback!
> Could you clone and build the following libqmi branch?
>
https://gitlab.freedesktop.org/mobile-broadband/libqmi/-/merge_requests/115
>
> Once you have it, you'll be able to configure the NMEA traces via qmicli,
e.g.:
> $ sudo qmicli -d /dev/cdc-w
Hey David,
> > > >
> > > > With all enable it only shows the 3GPP info with mmcli -m 0
> > > > --loction-get
> > >
> > > Daniele, any idea why we're not receiving NMEA traces via QMI
> > > indications in this case? Do you see something wrong in the sequence
> > > to enable the GNSS location gathe
Hey Daniele,
> > > > Then we need to debug why we were not able to get any LOC indication
> > > > with NMEA traces in David's setup.
> > >
> > > > David, could you retry to setup the location using the QMI protocol
> > > > (i.e. without your changes) but enabling both "nmea" and "raw"
> > > > loca
Hi Aleksander and David,
Il giorno mar 5 mag 2020 alle ore 17:14 Aleksander Morgado
ha scritto:
>
> Hey Daniele & David
>
> > > Then we need to debug why we were not able to get any LOC indication
> > > with NMEA traces in David's setup.
> >
> > > David, could you retry to setup the location usin
Hi Aleksander and David,
Il giorno mar 5 mag 2020 alle ore 17:14 Aleksander Morgado
ha scritto:
>
> Hey Daniele & David
>
>
> Daniele, any idea why we're not receiving NMEA traces via QMI
> indications in this case? Do you see something wrong in the sequence
> to enable the GNSS location gatherin
Hey Daniele & David
> > Then we need to debug why we were not able to get any LOC indication
> > with NMEA traces in David's setup.
>
> > David, could you retry to setup the location using the QMI protocol
> > (i.e. without your changes) but enabling both "nmea" and "raw"
> > locations?
> > Also,
Hi,
> Then we need to debug why we were not able to get any LOC indication
> with NMEA traces in David's setup.
> David, could you retry to setup the location using the QMI protocol
> (i.e. without your changes) but enabling both "nmea" and "raw"
> locations?
> Also, another test could be to enab
Hey!
> >
> > > After digging for documentation with no success, I migrate the location
> > > interface to mm-shared-telit and added a qmi interface for the telit
> > > plugin. For the merge request, would it be OK to merge that kind of
> > > changes in 1.12 or it must me on master for the next
Hi Aleksander,
Il giorno dom 3 mag 2020 alle ore 21:35 Aleksander Morgado
ha scritto:
>
> Hey!
>
> > After digging for documentation with no success, I migrate the location
> > interface to mm-shared-telit and added a qmi interface for the telit
> > plugin. For the merge request, would it be OK
Hey!
> After digging for documentation with no success, I migrate the location
> interface to mm-shared-telit and added a qmi interface for the telit plugin.
> For the merge request, would it be OK to merge that kind of changes in 1.12
> or it must me on master for the next release?
>
The merg
Hi,
After digging for documentation with no success, I migrate the location
interface to mm-shared-telit and added a qmi interface for the telit
plugin. For the merge request, would it be OK to merge that kind of changes
in 1.12 or it must me on master for the next release?
Thanks,
On Mon, Apr 2
>The above sequence looks good to me; you start the GPS engine and you
>also register for NMEA indications. After that, you should start
>receiving NMEA traces in QMI LOC indications, but I assume you're not
>receiving any? What MM and libqmi versions are you using?
Exact, I did a --location-enabl
Hey,
>
> I didn't found information in Telit documentation about the GPS control with
> QMI. I'll try to poke them directly. On the other side, I did enable the gps
> with success using mmcli but didn't had any data location under the
> --location-get command.
> Here is the log when I do the co
Hi,
I didn't found information in Telit documentation about the GPS control
with QMI. I'll try to poke them directly. On the other side, I did enable
the gps with success using mmcli but didn't had any data location under the
--location-get command.
Here is the log when I do the command mmcli -m 0
Hey!
> I am looking for a way to integrate the current telit GPS code in MM 1.12.x
> but on a LE910C1 that is currently using the qmi interface.
>
If you're using the modem in QMI mode, are you sure you don't already
have GPS control using either the LOC or PDS QMI services? Or does the
Telit mo
Hi,
Hope you guys go well, I searching to find some answer about
plugin development in modemmanager.
I am looking for a way to integrate the current telit GPS code in MM 1.12.x
but on a LE910C1 that is currently using the qmi interface.
As I read in other threads, the way to go would be to migra
19 matches
Mail list logo
