torrent downloads

Hello, I was wondering if there is any particular reason explaining why there is no torrent file to retrieve OpenBSD *.fs and *.iso. I've been looking on the list and only found this site that doesn't seems up to date [1]. If the reason is a lack of human ressources, I think I can handle it. Re

Re: torrent downloads

> yes, but unlike those distros the openbsd installers aren't measured in > gigabytes. > Of course, the point doesn't apply to miniroot* but to installxx.xx. It doesn't remove the problem of long download for some and servers bandwidth possible issue. Using miniroot* still requires to download f

Mail server with many users

Hello, according to recent discussion on the list, I was wondering how you set up a mail server with smtpd with a lot of users. Regards. --

spamassassin filtering problem

Hello, I was using spamassassin+smtpd for a while and everything worked as expected. Now I added support for more tan one domain and incoming mails are locked into allop, I can't figure out why. Here is my /etc/mail/smtpd.conf table aliases file:/etc/mail/aliases table virtuals

Re: Can I use OpenBSD in a virtual machine, for example, VirtualBox?

* SOUL_OF_ROOT 55 le [26-06-2017 18:18:41 -0300]: > Can I use OpenBSD in a virtual machine, for example, VirtualBox? yes signature.asc Description: PGP signature

Libreoffice calc crash

nterface 0 "Genesys Logic USB Mouse" rev 1.10/1.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse2 at ums0 mux 0 uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets sd2 at scsibus4 targ 1 lun 0: SCSI2 0/direct fixed sd2: 238472MB, 512 bytes/sector, 488391473 sectors root on sd2a (4764b1057435753d.a) swap on sd2b dump on sd2b -- thuban

Re: Libreoffice calc crash

when I modify a cell. > Do you have the user account set to the "staff" class, or somehow assigning > it a high datasize limit in login.conf? Yes, I run libreoffice with this user. -- thuban signature.asc Description: PGP signature

DNSSEC solution

Hi since we have nsd and unbound included in base, I was wondering what tool you use to deal with DNSSEC and sign your zone ? I use zkt, but your advices would be nice. Regards -- thuban signature.asc Description: PGP signature

httpd and gzip

Hi, since this thread [1] older than two years, is there any plan to have gzip compression in httpd ? [1] https://marc.info/?l=openbsd-misc&m=142402749002617&w=2 regards. -- thuban signature.asc Description: PGP signature

relayd transparent don't work

Hi, I'm using relayd to check headers before serving my website with httpd. I need to keep in httpd's logs the client IP address. So I try to use the "transparent" keyword in relayd.conf, but in this case, relayd doesn't work and I can't reach httpd. Here is the **not working** relayd relevant co

[rspamd and smtpd] (was: the whole greylisting, spam filtering thing)

By the way, does anyone has some instructions to use rspamd with the default smtpd ? Regards. -- thuban

httpd match pattern issue

d)/%d%d/%d%d/%d%d%-(%g+)$" { block return 301 "/%1/$2" } Any advice? After many tests, it seems that the only problem is the "?" thanks. -- thuban

dovecot confusing default ssl configuration

I think this is since 6.3. Qhen installin dovecot package, a few files are created. The problem is that /etc/dovecot/conf.d/10-ssl.conf contains : ssl_cert =

USB power management

Hi, this might look as a stupid question, but I'm stuck and don't know where to look at this point. How would you disable an USB port? I would like to power off a USB drive (flashing blue LED at night) but keep it plugged, and power on when I need it. Any advice? Regards. -- thuban

nvi and unicode

Default vi (nvi) in OpenBSD doesn't handle correctly most of UTF-8 sings such as "é", "à" or so. One need to install nvi package to do so. Is it planned to replace the vi binary in the future? Is there any reason I can't think to keep this vi version? Regards. -- thuban

Re: nvi and unicode

Thanks for enligthenment. * Predrag Punosevac le [13-07-2018 10:06:19 -0400]: > On July 13 2018 Thuban wrote: > > > > Default vi (nvi) in OpenBSD doesn't handle correctly most of UTF-8 > > sings such as "", "?? " or so. One need to install

Re: Cloud-Storage & OpenBSD

re would be the ability to share the service with my family > > using different accounts. > > > > The ability to generate credentials that can only access certain folders > > would be _really_ cool. For example, my machines could generate > > reports and store them in my sync'd service so I could simplify > > viewing them from any machine. > > > > Thanks! net/syncthing -- thuban

relayd as transparent proxy

working example please ? Thanks. [1] http://nohair.net/transparent_reverse_proxy.html -- thuban

Re: relayd as transparent proxy

I think I found something working, I leave it here for others. Any advice is still welcome. By the way, I'm confused about the "transparent forward" directive in relayd.conf. It doesn't seems to work at all and setting a transparent proxy is not using this keyword. /etc/relayd.conf : ht

Re: relayd as transparent proxy

my bad, I still don't have the real source IP in my logs (just the local ip address of my server). Any advice for a **real** transparent proxy ?

Re: relayd as transparent proxy

* Stuart Henderson le [21-09-2018 10:10:03 +]: > On 2018-09-20, Thuban wrote: > > By the way, I'm confused about the "transparent forward" directive in > > relayd.conf. It doesn't seems to work at all and setting a transparent > > proxy is > >

[relayd] transparent don't work

I found a partial solution to my problem. With the following configuration, the source client IP is correctly printed by a php script (getip.php), but not in httpd logs. Does anyone has an example with "transparent forward" please ? relayd.conf : http protocol "http" { t

[relayd] set response header for tagged connexion

che-Control" value "max-age=1814400" Of course, there is a syntax error. Any advice ? -- thuban

Re: [relayd] set response header for tagged connexion

* tomr le [17-10-2018 15:37:42 +1100]: > > > On 10/17/18 4:14 AM, Thuban wrote: > > Hi, > > I want to set a header according to the requested path. The goal is to > > increase > > the cache-control according to file extension. > > > >

Re: spamd and google smtp ips

omain-white-spamd, adjust with domins you need : TMP=$(mktemp) WHITELIST=/etc/mail/whitelist.txt DOMAINS='outlook.com gmail.com google.com hotmail.com yahoo.com yahoo.fr live.fr mail-out.ovh.net mxb.ovh.net gandi.net laposte.net github.com protonmail.com ' for d in $DOMAINS; do echo "$d" | smtpctl spf walk >> "$TMP" done mv "$TMP" "$WHITELIST" exit 0 -- thuban

Permission on virtual user password file [dovecot+smtpd]

rt of dovecot config passdb { args = scheme=blf-crypt /etc/mail/passwd driver = passwd-file } -- thuban

Re: Permission on virtual user password file [dovecot+smtpd]

self-answer after some digging [1]. Not sure why I have to specify this. I mean, what is the group used by dovecot by default ? To make /etc/mail/passwd unreadable by regular users, I did this : groupadd _maildaemons usermod -G _maildaemons _sftpd usermod -G _maildaemons

smtpd.conf and junk

have multiple X-Spam-* headers, but aren't placed into Junk folder. Any advice ? -- thuban

Re: smtpd.conf and junk

* Gilles Chehade le [21-11-2018 16:31:31 +0100]: > On Wed, Nov 21, 2018 at 03:22:45PM +0100, Thuban wrote: > > Hi, > > I can't figure how to make this "junk" argument to work as > > mentioned in The smtpd.conf manpages : > > > > If th

Re: smtpd.conf and junk

* Edgar Pettijohn le [21-11-2018 11:32:43 -0600]: > > On Nov 21, 2018 8:22 AM, Thuban wrote: > > > > Hi, > > I can't figure how to make this "junk" argument to work as > > mentioned in The smtpd.conf manpages : > > > > If the junk argume

Re: smtpd.conf and junk

* Gilles Chehade le [21-11-2018 21:06:39 +0100]: > On Wed, Nov 21, 2018 at 06:38:43PM +0100, Thuban wrote: > > * Edgar Pettijohn le [21-11-2018 11:32:43 -0600]: > > > > > > On Nov 21, 2018 8:22 AM, Thuban wrote: > > > > > > > > Hi, > &g

Re: mail.maildir junk patches

Nice to see such feature (no need dovecot). For now, It's still possible with dovecot, lmtp delivery and sieve filter [1]. [1] https://wiki.dovecot.org/Pigeonhole/Sieve/Extensions/SpamtestVirustest 24 novembre 2018 18:02 "Edgar Pettijohn III" a écrit: > make the junk header customizable like so

Touchpad generate random input

ectors ugen0 at uhub3 port 3 "Cambridge Silicon Radio Bluetooth" rev 2.00/52.76 addr 4 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd1a (96d45ca8006100da.a) swap on sd1b dump on sd1b -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: Touchpad generate random input

Thomas Bohl gave me a solution : during boot, use the touchpad AND the keyboard. Then, averything works as expected. Here is the new dmesg : Regards OpenBSD 5.8 (GENERIC.MP) #0: Tue Nov 10 11:57:58 CET 2015 jas...@stable-58-amd64.mtier.org:/binpatchng/work-binpatch58-amd64/src/sy s/arch/

Re: PATCH: cwm move window to {top,bottom}{left,right} corners

break; > + case CWM_BOTTOM_LEFT: > + cc->geom.x = xine.x; > + cc->geom.y = xine.y + xine.h - cc->geom.h - cc->bwidth * 2; > + client_move(cc); > + break; > + case CWM_TOP_RIGHT: > + cc->geo

Re: Community-driven OpenBSD tutorials wiki?

want to achieve.) yes, see here : https://wiki.obsd4a.net/doku.php It's mainly in french, but I don't know what is your favourite language. regards -- thuban signature.asc Description: PGP signature

Re-compute bsd checksum

I disabled `ulpt` in the kernel using `config` to use an USB-printer. Now, at reboot, I see "kernel relinking failed" message. How to recreate the new checksum? I can't igure out where to find this information. Any advice? Regards. -- thuban signature.asc Description: PGP signature

Re: Re-compute bsd checksum

* Sterling Archer le [16-01-2018 21:35:56 +0100]: > On Tue, Jan 16, 2018 at 9:08 PM, Thuban wrote: > > I disabled `ulpt` in the kernel using `config` to use an USB-printer. > > > > Now, at reboot, I see "kernel relinking failed" message. > > How to recreat

gzip compression and httpd/relayd

I'm very happy with relayd + httpd. Relayd deals with headers and httpd serve files. I know httpd doesn't have gzip compression. 1. Do you know if it's planned in the future? 2. Does anyone has a workaround to advise? regards -- thuban

Re: gzip compression and httpd/relayd

Thank you for all answers, very interesting. I'll try to compress some files on my own, we'll see. Regards -- thuban signature.asc Description: PGP signature

Re: gzip compression and httpd/relayd

> Yes it's possible. Make sure to set the appriopriate HTTP headers aswell > with relayd: read "Accept-Encoding" and if it's acceptable set > "Content-Encoding". Indeed, it works. relayd.conf : match response header "Accept-Encoding" value "gzip" match response header set "Content

Re: gzip compression and httpd/relayd

* Stuart Henderson le [29-01-2018 08:14:03 +]: > On 2018-01-28, Thuban wrote: > > > >> Yes it's possible. Make sure to set the appriopriate HTTP headers aswell > >> with relayd: read "Accept-Encoding" and if it's acceptable set &g

roundcube and enigma [PGP]

Hi, Did anyone use enigma plugin with roundcube hosted on OpenBSD to deal with GPG? I can't figure exactly how to configure it with httpd chroot, even after copying gpg binaries in chroot. Regards -- thuban

Re: roundcube and enigma [PGP]

* jul le [03-02-2018 12:47:19 +0100]: > Thuban wrote: > > > I can't figure exactly how to configure it with httpd chroot, even after > > copying gpg binaries in chroot. > > Hello Thuban > > To know what to copy in the chroot, ldd(1) is your friend. thanks,

Re: roundcube and enigma [PGP]

* Thuban le [03-02-2018 18:38:27 +0100]: > * jul le [03-02-2018 12:47:19 +0100]: > > Thuban wrote: > > > > > I can't figure exactly how to configure it with httpd chroot, even after > > > copying gpg binaries in chroot. > > > > Hello Thuban

Flask app with chrooted httpd

Hi, Did anyone use httpd to serve a flask app (python)? I found this [1], but its a little outdated (python < 3) and makes me wonder about safety, because of all those dependencies copied in chroot. Any advice ? Regards -- thuban

Re: Flask app with chrooted httpd

I forgot the link, my bad: [1] : http://www.hydrus.org.uk/journal/openbsd-httpd.html signature.asc Description: PGP signature

Custom bsd.rd to include auto_install.conf

include auto_install.conf file. Do you have any advice for this ? I found some tutorials for 5.7 [1], so quite outdated, and can't go through the entire process. Regards. [1] : http://mouedine.net/reinstall57/ -- thuban signature.asc Description: PGP signature

Re: Custom bsd.rd to include auto_install.conf

" fi # mountpoint cleanup (ensure it is empty) rmdir "${WRKDIR}/ramdisk.d" # put ramdisk back in bsd.rd elfrdsetroot "${WRKDIR}/bsd.rd" "${WRK

Re: smtpd.conf and junk

* Gilles Chehade le [25-11-2018 15:30:20 +0100]: > On Wed, Nov 21, 2018 at 09:21:46PM +0100, Thuban wrote: > > * Gilles Chehade le [21-11-2018 21:06:39 +0100]: > > > On Wed, Nov 21, 2018 at 06:38:43PM +0100, Thuban wrote: > > > > * Edgar Pettijohn le [21-1

iked for travelling clients

valid type 1 data length 256 ikev2_dispatch_cert: AUTH type 1 len 256 sa_stateflags: 0x0024 -> 0x002c certreq,auth,sa (required 0x ) ikev2_recv: IKE_AUTH request from initiator 176.180.81.105:19761 to 46.23.92.147:4500 policy 'warrior' id 1, 3536 bytes ikev2_recv: ispi 0x515201836a3a178d rspi 0x72e7d26735a1b6e8 Any advice please ? -- thuban

iked : pf.conf rule for outgoing traffic

ugh B. Here is the pf.conf on B (at least a small part of it) pass out on egress \ from any to any tagged IKED \ nat-to (egress) I guess the issue is in my pf.conf. What do you think ? Any advice? Regards. -- thuban

Re: iked : pf.conf rule for outgoing traffic

* Thuban le [02-12-2018 19:16:09 +0100]: > Hi, > I need help to write a correct rule in pf.conf. > > I want : > > A -> B --> web > > The appearing IP of A is the B's one on the web. > > I managed to configure iked on A and B using defaul

Re: iked : pf.conf rule for outgoing traffic

* Stuart Henderson le [06-12-2018 13:44:50 +]: > On 2018-12-06, Thuban wrote: > > * Thuban le [02-12-2018 19:16:09 +0100]: > >> Hi, > >> I need help to write a correct rule in pf.conf. > >> > >> I want : > >> > >> A ->

Re: iked : pf.conf rule for outgoing traffic

* Stuart Henderson le [10-12-2018 18:19:41 +]: > On 2018-12-07, Thuban wrote: > > * Stuart Henderson le [06-12-2018 13:44:50 +]: > >> On 2018-12-06, Thuban wrote: > >> > * Thuban le [02-12-2018 19:16:09 +0100]: > >> >> Hi, > >

re0 issue : system freeze

Hi, I have an issue on my server : after a while, it seems down and freeze. I have no SSH access because it's offline, I only can reboot it. Looking in /var/log/messages, I see "/bsd: re0: watchdog timeout". Instead of replacing the network card, what can I do to solve this issue? Below more info

spamd and low priority MX

er priority), does the -M flag can be called more than once ? Am I wrong ? Regards. thuban

[bug?] cwm mouse can't leave dialog window

ncast of what's happening to me. Am I the only one ? Any suggestion to solve this ? -- thuban

Re: How to synchronise 2 spamd instances

* Otto Moerbeek le [21-04-2019 12:49:07 +0200]: > On Sun, Apr 21, 2019 at 09:53:52AM +, Mik J wrote: > > > Hello, > > I read the man but it's not so clear to me > > https://man.openbsd.org/spamd#SYNCHRONISATION > > a) I chose unicast synchronisation but I don't know which port should I > > o

ulpt vs kernel relinking

/GENERIC.MP/relink.log Ok, so I run, as mentioned in the above file : sha256 -h /var/db/kernel.SHA256 /bsd However, at next reboot, ulpt is reenabled. How can I still have KARL and use my printer ? -- thuban

Re: ulpt vs kernel relinking

* Antoine Jacoutot le [10-05-2019 14:41:08 +0200]: > On Thu, May 09, 2019 at 11:41:17PM -0600, Theo de Raadt wrote: > > config -e is incompatible with the KARL relinking sequence. > > > > For now, we consider KARL more valuable than config -e usage > > patterns. > > > > We've thought about th

pf rule for openvpn

Hi, I have an openvpn server running and working, but can't go "outside" the server to access the web. To configure the server, I followed this : http://2f30.org/guides/openvpn.html So ip forwarding is ative, vpn port is open, clients can connect to the vpn. But they can't access wwweb. I guess

Re: pf rule for openvpn

* obsd le [23-10-2016 21:13:19 +0200]: > Op 23-10-2016 om 17:01 schreef Thuban: > > Hi, > > I have an openvpn server running and working, but can't > > go "outside" the server to access the web. > > > > To configure the server, I followed this : &g

Re: pf rule for openvpn

* Predrag Punosevac le [23-10-2016 20:18:27 -0400]: > Op 23-10-2016 om 17:01 schreef Thuban: > > Hi, > > I have an openvpn server running and working, but can't > > go "outside" the server to access the web. > > > > To configure the serv

Re: pf rule for openvpn

n quick on $ext_if proto tcp to any port $tcp_pass keep state pass in quick on $ext_if proto udp to any port $udp_pass keep state # vpn pass in quick on $tun_if keep state pass out on $ext_if from 10.8.0.0/24 to any nat-to ($ext_if) # tout ouvert en sortie pass out on $ext_i

Re: pf rule for openvpn

* Thuban le [25-10-2016 10:41:27 +0200]: > > # tcpdump -e -ttt -ni pflog0 action block > > > > You will be able to see what exactly is being blocked :) > > Okay, I'm just too stupid. I can access the wwweb through my VPN. I just can't ping, which is not a probl

Re: Slow wifi

FAQ > https://www.openbsd.org/faq/faq5.html#Flavors > im wondering if im missing something. No, I don't think that's possible. It's safer to do a clean install of -release . -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Custom installation iso

dvice to include packages with dependencies in an install cd ? regards. thuban [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: Custom installation iso

* Stuart Henderson le [31-12-2016 21:08:13 +]: > On 2016-12-31, Thuban wrote: > > Hello, > > I currently use customized install60.iso images with site60.tgz set. It > > works quite well, but I need to include in site60.tgz set some packages. > > > > For now,

installXX.fs build

Hi, Just by curiosity, I was wondering how installXX.fs file is build? Regards. -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: installXX.fs build

* Jiri B le [27-01-2017 17:01:17 -0500]: > On Fri, Jan 27, 2017 at 08:29:08PM +0100, Thuban wrote: > > Hi, > > > > Just by curiosity, I was wondering how installXX.fs file is build? > > https://github.com/openbsd/src/blob/master/distrib/amd64/iso/Makefile#L9 > > j

relayd and letsencrypt certificates

port 8443 mode loadbalance check tcp } Do you see any error or have any advice? Regards. thuban

Re: relayd and letsencrypt certificates

* trondd le [10-02-2017 12:32:36 -0500]: > On Fri, February 10, 2017 11:48 am, Thuban wrote: > > Hello, > > I can't figure how to use letsencrypt certificates with relayd. I keep > > getting this error : > > > > # relayd -vvv -n > > /etc/relayd

build libtorrent fail

ronment... yes checking whether the Boost::Python library is available... no configure: error: Boost.Python library not found. Try using --with-boost-python=lib. You may find the full ./configure log here : http://pastebin.com/Ac4SkrEG Any advice ? Regards. [1] : http://libtorrent.org/ --

Install fail on Latitude E64460 : disk not recognised

s the best I could ask via mail). https://clbin.com/lRWaSs.jpeg https://clbin.com/bsJGm7.jpeg https://clbin.com/ddgY4d.jpeg https://clbin.com/BkaCiG.jpeg https://clbin.com/ji8jtn.jpeg https://clbin.com/DGBVtl.jpeg https://clbin.com/OR6ZBu.jpeg Do you have any advice? Regards. -- :thuban: [de

Re: Install fail on Latitude E64460 : disk not recognised

* lawgi...@nym.hush.com le [03-04-2017 13:52:20 -0700]: > On 4/3/2017 at 1:31 PM, "Thuban" wrote: > >I try to help a friend installing OpenBSD on a Dell Latitude E6440. > >It seems the disk (SSD) isn't recognised, only the USB stick is > >found by > >

[relayd] keep origin IP in logs

/Using-relayd-to-add-Cache-Control-headers-to-httpd-traffic -- :thuban:

Re: [relayd] keep origin IP in logs

* Hiltjo Posthuma le [09-04-2017 11:42:23 +0200]: > On Sat, Apr 08, 2017 at 08:48:43PM +0200, Thuban wrote: > > Hello, > > I use relayd to deal with HTTP headers as suggested here [1]. > > My problem is that in httpd logs, the origin IP is 127.0.0.1 and thats > &

Re: [relayd] keep origin IP in logs

* Hiltjo Posthuma le [09-04-2017 14:06:48 +0200]: > On Sun, Apr 09, 2017 at 11:30:37AM +, Stuart Henderson wrote: > > On 2017-04-09, Thuban wrote: > > > * Hiltjo Posthuma le [09-04-2017 11:42:23 +0200]: > > >> On Sat, Apr 08, 2017 at 08:48:43PM +0200

ugen0 instead of urtwn0

Hi, I have a usb wifi dongle supposed to work with urtwn firmware. usbdevs returns WNA 1000Mv2 Netgear listed here [0] But the device is detected as ugen. How can I fix this? Regards. [0] : http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/urtwn.4?query=urt wn&sec=4 -- Th

Re: ugen0 instead of urtwn0

* Thuban le [21-09-2015 11:14:22 +0200]: > usbdevs returns WNA 1000Mv2 Netgear listed here [0] > > But the device is detected as ugen. My bad, it seemd to be fixed in 5.8 [0]. Except waiting for 5.8 or unsing -current, I guess there is no other solution to usr this usb stick? [

Re: ugen0 instead of urtwn0

* Fred le [21-09-2015 11:50:27 +0100]: > On 09/21/15 11:01, Thuban wrote: > >* Thuban le [21-09-2015 11:14:22 +0200]: > >>usbdevs returns WNA 1000Mv2 Netgear listed here [0] > >> > >>But the device is detected as ugen. > > > >My bad, it seemd to be

Re: ugen0 instead of urtwn0

rtwn.c # # rebuild/install kernel -- Thuban PubKey : http://yeuxdelibad.net/Divers/thuban.pub [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: ugen0 instead of urtwn0

> > I rebuild and installed the kernel without any error, but still, the usb > > stick isn't detected as urtwn. > > > > What did I do wrong : > > > > # cd /usr > > # export CVSROOT=anon...@anoncvs.fr.openbsd.org:/cvs > > # cvs -d$CVSROOT checkout -rOPENBSD_5_7 -P src > > > You don't wan

Re: ugen0 instead of urtwn0

* Stefan Sperling le [22-09-2015 11:33:28 +0200]: > On Mon, Sep 21, 2015 at 11:14:22AM +0200, Thuban wrote: > > Hi, > > I have a usb wifi dongle supposed to work with urtwn firmware. > > usbdevs returns WNA 1000Mv2 Netgear listed here [0] > > > > But the device

Re: ugen0 instead of urtwn0

> Those instructions are for 5.8 or possible 5.7, they aren't needed for > -current snapshots which already include this change. > Of course, I read the files. -- Thuban PubKey : http://yeuxdelibad.net/Divers/thuban.pub [demime 1.01d removed an attachment of type application/pgp-s

rookie questions about flavors

d.org/pub/OpenBSD/snapshots/amd64/install58.iso -- Thuban [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: rookie questions about flavors

l58.iso in a snapshot directory gave me some doubts about what i understood in the FAQ (as english is not my first language). -- Thuban PubKey : http://yeuxdelibad.net/Divers/thuban.pub [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Can't use sshfs as user

http://openbsd-archive.7691.n7.nabble.com/sshfs-as-non-root-fuse-mount-Permis sion-denied-td253224.html -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: Can't use sshfs as user

* Thuban le [22-04-2016 16:51:39 +0200]: > Hi, > I try to mount a directory with sshfs as non-root, but I get the > following error : > > fuse_mount: Permission denied > > I don't get it. I have "kern.usermount=1" in /etc/sysctl.conf, but > according to

Re: Can't use sshfs as user

* Sebastien Marie le [24-04-2016 10:17:58 +0200]: > On Fri, Apr 22, 2016 at 04:51:39PM +0200, Thuban wrote: > > Hi, > > I try to mount a directory with sshfs as non-root, but I get the > > following error : > > > > fuse_mount: Permission denied > > >

Re: Fwd: Creating a blog using OpenBSD: technology choices and security considerations

com/tontof/kriss_blog [3] : http://tildehash.com/?page=hashover -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Installing py3-libtorrent

Hello, I need to install the python3 bindings for libtorrent. I doesn't seem to be packaged, nor present in ports. Because I need to install it on several machines, I wanted to ask if I didn't miss it somewhere, before compiling it by hand again and angain. Thanks. -- /Thuban/ [de

Re: light browsers

the list. With some time, it becomes very handy. But what about netsurf? http://www.netsurf-browser.org/ Regards, -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

libtorrent build fail

ibtorrent.org/building.html [2] : https://svnweb.freebsd.org/ports/head/net-p2p/libtorrent-rasterbar/Makefile?v iew=markup -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

Re: libtorrent build fail

* Josh Grosse le [26-05-2016 12:30:40 -0400]: > On 2016-05-26 11:50, Thuban wrote: > >Hi, > >I'm trying to build libtorrent [1], but can't figure out how to have > >./configure detect boost library. > > Have you tried installing the libtorrent package? :) &g

Re: libtorrent build fail

Tah was too beautiful, now it's``make`` that give me errors I can't understand : In file included from ../include/libtorrent/parse_url.hpp:40, from web_connection_base.cpp:53: ../include/libtorrent/aux_/disable_warnings_pop.hpp:42: warning: expected [error|warning|igno

Re: libtorrent build fail

* David Coppa le [27-05-2016 15:39:00 +0200]: > On Fri, May 27, 2016 at 3:02 PM, Thuban wrote: > > Tah was too beautiful, now it's``make`` that give me errors I can't > > understand : > > > > > > In file included from ../include/libtorrent/par

Re: Clean OpenBSD's httpd logs

ot;yourdomain.errors.log" } see man httpd.conf for more :) -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

bluetooth audio device

Hello, I'm trying to connect an audio device via bluetooth, but can't find any intructions to do so on OpenBSD. Do you have any advices/links? Regards, -- /Thuban/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

  1   2   >