rule 4/(match) block in on vether0:
192.168.123.2.39279 > 31.13.77.6.443: R 31:31(0) ack 1 win 1545 (DF)
# pfctl -R 4 -sr
block drop log all
It is not all https traffice that is being blocked as I can hit my
banking site, etc. Does anyone have an idea why are these packets being
blocked?
Thanks,
Steve Williams
alkonen wrote:
Hello,
a quick glance and it seems you aren't allowing vether traffic to pass.
--
Regards,
Ville
On Jun 26, 2017 8:19 PM, "Steve Williams"
<mailto:st...@williamsitconsulting.com>> wrote:
Hi,
New install of OpenBSD 6.1 on apu2. Love the little box.
Hmm, have you enabled net.inet.ip.forwarding?
Timo
Steve Williams writes:
Hi,
Packets from vether are going out NAT'd no problem. I have 100%
Internet access on 192.168.123.0/24.
From my understanding, the "pass out quick inet all flags S/SA" allow
packets out and should create
to update records?
I've read the NSD(8), nsd.conf(5) man pages and that seems to be the way
to go, but I thought I'd check the wisdom here to see if there is a
better approach.
Thanks,
Steve Williams
Hi,
Thanks for the feedback everyone!
I'll be looking at unbound and seeing if I need nsd or not.
Have a great weekend!
Cheers,
Steve
On 28/07/2017 7:58 AM, Steve Williams wrote:
Hi,
I recently upgraded to 6.1 and am trying to (finally, after many
OpenBSD versions over 10 years) fine
Hi,
Sources is a table, so you need to use the Table commands to flush it.
pfctl -t Sources -T flush
To give you an idea...
I have a "blocklist" that I am keeping updated hourly from
http://lists.blocklist.de/
I've found the maximum number of hosts on my system in a table is
somewhere betw
did confirm that the "pfctl -F Sources" does not empty my "Sources"
table on my stock OpenBSE 6.1.
Interesting...
Thanks for clarifying. I learned something :)
Cheers,
Steve
On 02/08/2017 2:59 PM, Markus Wernig wrote:
On 02.08.2017 16:07, Steve Williams wrote:
pfctl -t Sou
Hi,
I've been using ddclient with Zonedit (by EasyDNS) for about 10 years.
Configure the ddclient.conf file and it "just works". I didn't log into
the EasyDNS portal for several years.
It's worked with DSL, DSL over ppoe, and now my Cable provider catching
interface IP changes automaticall
Hi,
Another data point..(sorry to top post... but felt it's appropriate)
I've got APU as well. Running OpenBSD 6.1:
OpenBSD 6.1 (GENERIC.MP) #24: Wed Oct 4 18:47:09 CEST 2017
rob...@syspatch-61-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
# dmesg | grep athn
athn0 at pci4 dev
On 16/10/2017 1:57 AM, Farid Joubbi wrote:
Hi,
I upgraded my OpenBSD installation from 6.1 to 6.2.
In the upgrade process I also upgraded the ownCloud package to 10.0.3.
Now when I browse to the ownCloud page, it wants to upgrade.
The upgrade fails with this message:
Repair warning: You
are a few services that must be started at the very end).
Normally, rc.local contains commands and daemons that are not part
of the
stock installation.
Thanks,
Steve Williams
Hi,
Awesome! Thanks for the pointer to cron! I never knew the @reboot
existed :)
Cheers,
Steve W.
On 10/11/2018 3:22 PM, Christian Weisgerber wrote:
On 2018-11-10, Steve Williams wrote:
I have a script that I would like run after all the network is
configured, daemons started, etc.
I
curity
before packets even hit Tomcat?
Thanks,
Steve Williams
On 14/04/2020 4:13 p.m., Sriram Narayanan wrote:
On Wed, 15 Apr 2020 at 6:03 AM, Steve Williams
<mailto:st...@williamsitconsulting.com>> wrote:
Hi,
For a R&D project, I am trying to get guacamole working to be able to
access systems on my home net
read implementation will work fine within a process, just not
multiple processes.
Is this a correct assessment of the code and OpenBSD's pthread environnment?
Thanks,
Steve W.
On 15/04/2020 10:19 a.m., Stuart Henderson wrote:
On 2020-04-14, Steve Williams wrote:
Guacamole (I believe) need
ng it
to PTHREAD_PROCESS_SHARED seems totally irrelevant.
If so, I *think* it's OK to just comment out that code as OpenBSD's
pthread implementation will work fine within a process, just not
multiple processes.
Is this a correct assessment of the code and OpenBSD's pthread environnment?
Hi,
Do you have the proper ioctls to set baud rate, parity, start bits, stop
bits so that the serial port is configured correctly?
What about flow control? rts/cts, xon/xoff.
Dealing with a serial port is it's own art.
Cheers,
Steve W.
On 10/06/2020 3:03 a.m., Valdrin MUJA wrote:
Hi Misc,
On 10/06/2020 10:31 a.m., Aisha Tammy wrote:
On 6/10/20 10:46 AM, Steve Williams wrote:
Hi,
Do you have the proper ioctls to set baud rate, parity, start bits, stop bits
so that the serial port is configured correctly?
What about flow control? rts/cts, xon/xoff.
Dealing with a serial port
Hi,
I have a script that downloads "badhosts" from a site that continuously
updates through a distrubed network.
I currently limit my blocklist to 450,000 ip addresses.
real mem = 4261072896 (4063MB)
avail mem = 4119322624 (3928MB)
bios0: PC Engines apu2
-pa-r-- blocklist
Addresses
On 02/01/2020 5:26 a.m., Jay Hart wrote:
Hey all, and Happy New Years!!!
I am currently using DYN.COM for DNS service. A few months back they changed
there payment
methodology and I am now considering finding another solution. DYN charges me
$5 US monthly so its
not a huge financial burden. Th
ead_mutexattr"
returned:
https://man.openbsd.org/man3/pthread_mutexattr.3
This function is definitely missing...
I tried to see if there was a way to use pthread_mutexattr_settype to
accomplish the same thing, but got lost in the maze of documentation.
Does anyone have any recommendations on how to work around not having
pthread_mutexattr_setpshared in the OpenBSD pthreads library?
Thanks,
Steve Williams
On 05/03/2020 10:53 a.m., Edgar Pettijohn wrote:
On Mar 5, 2020 10:15 AM, Steve Williams wrote:
Hi,
Should this be on ports@? I'm not working on a port...
TL;DR:
Does anyone have any recommendations on how to work around not having
pthread_mutexattr_setpshared in the OpenBSD pth
Hi,
cpio has always been my "go to" for file system duplication because it
will re-create device nodes.
Cheers,
Steve Williams
On 10/12/2017 11:03 AM, webmas...@bennettconstruction.us wrote:
Forgive problems with this email.
I saw how my emails showed up on marc.info
Scary. Th
On 11/12/2017 12:27 PM, Philip Guenther wrote:
On Mon, Dec 11, 2017 at 9:16 AM, Otto Moerbeek <mailto:o...@drijf.net>> wrote:
On Mon, Dec 11, 2017 at 08:30:54AM -0700, Steve Williams wrote:
> cpio has always been my "go to" for file system duplication
be
drivers don't give very fast performance for it. Lots about it in the
email list archives.
Mine shows up (OpenBSD 6.1) as:
athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 5 int 16
athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 04:f0:21:1b:b3:68
Cheers,
Steve Williams
On 19/04/2018 7:55 AM, Rupert Gallagher wrote:
On Thu, Apr 19, 2018 at 15:38, Zé Loff wrote:
# mountd -d > /var/log/mountd.log 2&>1 &
It is the first thing I did this morning. Unfortunately it does not survive
when ssh breaks out. Also, mountd -d is returning the shell prompt again, so I
Hi,
With OpenBSD 6.8 installed, I'm investigating switching from OpenVPN
over to Wireguard.
This is for roadwarrior with Windows 7/10 laptops to access my OpenBSD
6.8 server.
All I can find is wg(4) for reference. It has kind of an interesting
example, but I am struggling a bit without th
Hi,
Thanks for the man page pointer. I cannot believe I didn't think to
look there. A bit embarrassed now.
Cheers,
Steve W.
On 23/12/2020 1:16 p.m., Stuart Henderson wrote:
On 2020-12-23, Steve Williams wrote:
Hi,
With OpenBSD 6.8 installed, I'm investigating switching fr
Hi,
I am not sure where my issue is...
As I understand, WireGuard is strictly UDP.
I am working on a road warrior setup, where one end of the tunnel is my
OpenBSD server with a static public IP address and the other end will be
Windows 7/10 laptops with random public IP addresses.
My hostna
27;t install pulseaudio-14.0: can't resolve consolekit2-1.2.2
Couldn't install consolekit2-1.2.2 polkit-0.118 pulseaudio-14.0
spidermonkey78-78.5.0v1
desktop#
Am I being too impatient?
Thanks,
Steve Williams
for that now. Time will
fix it though.
Am Thu, Jan 07, 2021 at 09:54:39AM -0700 schrieb Steve Williams:
Hi,
I hesitate to send this because perhaps I'm just too impatient, but then
again, perhaps not. This is not critical/time sensitive.
I just thought I'd check if there a proble
On 07/01/2021 1:30 p.m., Christian Weisgerber wrote:
Steve Williams:
I hesitate to send this because perhaps I'm just too impatient, but then
again, perhaps not. This is not critical/time sensitive.
I just thought I'd check if there a problem with the current packages folder
from t
On 26/01/2021 10:43 a.m., Austin Hook wrote:
Wonder if anyone is still using Procmail/Formail under 6.8 for presorting
incoming mail before it hits one's main inbox.
Also wondering if folks send the remainimg mail, after filtering, to
/var/mail/*user*, or to ~/mbox or to ~mail/mbox. Any advanta
Hi,
It is running in a chroot. No access to "standard" networking files.
hosts, resolv.conf, etc.
Probably easiest to put the actual IP address in. I use a socket and
put in in the chroot folder. Not sure which is better.
If you run into any other network type issues, suspect the lack o
mmending for procmail. I gather most everyone else has left procmail
in the dust....
====
On Wed, 27 Jan 2021, Steve Williams wrote:
Hi,
I am using procmail under 6.8 successfully.? I did have problems with it when
upgrading to (I think) 6.4.
If you look for the mail list archives for &qu
Hi,
When I upgraded to OpenBSD 6.9 then did the pkg_add -u, I got
php-php-7.4.18 installed.
How do I know if it's "safe" to delete the old php-7.3.28 and all the
associated modules?
I know I'll have to migrate my ".ini" file changes to the new version
for both php and php_fpm, but other th
Hi,
I have had absolutely TERRIBLE luck with replacement laptop batteries
(DELL) that weren't OEM. I had 2 different ones die shortly after the
warranty period. My Dell batteries are twice the price, but I get many
years of use out of them.
YMMV...
Cheers,
Steve W.
On 15/07/2021 8:54 a.m
ING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 58 pins
bwfm0: address e4:5f:01:79:5d:54
umass1 at uhub1 port 2 configuration 1 interface 0 "Sunplus Technology
Inc. USB to Serial-ATA bridge" rev 2.00/1.03 addr 9
umass1: using SCSI over Bulk-Only
scsibus4 at umass1: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0:
serial.04fc0c25JNB0J800926Z
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
Problem drive, powered on after boot, them mounted and the boot
continues
Thanks,
Steve Williams
y
camera shoot jpgs and raw and it will provide the option of which to view.
For videos, you can create a thumbnail from the video so the user has a
bit of a clue what they might be going to watch.
Good luck!
Cheers,
Steve Williams
4d4
+ GAPDUMMY=gapdummy.o
+ random_uniform 12288
+ RANDOM1=5878
+ random_uniform 4096
+ RANDOM2=3116
+ random_uniform 4096
+ RANDOM3=2520
+ random_uniform 4096
+ RANDOM4=707
+ random_uniform 4096
+ RANDOM5=185
+ cat
+ > gap.link
+ << __EOF__
+ ld -r gap.link gapdummy.o -o gap.o
Abort trap
Any thoughts/advice?
Thanks,
Steve Williams
Hi,
Please disregard this.
There was a discrepancy with some 7.1 files from the base install that
needed to be updated.
Cheers,
Steve W.
On 10/12/2022 3:55 p.m., Steve Williams wrote:
Hi,
TL;DR
After (messy) upgrade, I'm getting the following in the relink.log:
(SHA256) /bsd: OK
L
ith_aliases and mda_without_aliases?
match for local action mda_with_aliases
match from any for domain example.com action mda_without_aliases
match for any action "outbound"
^^^ Similarily, the "outbound" has quotes, but the 2 "mda_with.."
lines don't have quotes.
Slightly confused, just wanting to understand precisely the config file.
Thanks,
Steve Williams
Hi,
Small town British Columbia here...
I know it's not what you are asking, but...
I have a Telus business plan (fiber) which gives me 2 static IP
addresses and host it myself. You can't do it on a "Residential"
because some of the ports are filtered. I had a huge battle with Telus
over t
thout being
processed by "mail.local" ... or that's my interpretation.
In the /var/mail/steve file, I can see the following lines prior to the
upgrade:
From steve+caf_=steve=williams-steve@williamsitconsulting.com Sat
Jan 26 09:52:48 2019
^^
After the upgrade, I'm no
On 26/01/2019 11:03 p.m., ed...@deathstar.my.domain wrote:
On Sat, Jan 26, 2019 at 08:53:06PM -0700, Steve Williams wrote:
Hi,
I upgraded from OpenBSD 6.3 to OpenBSD 6.4 today. I upgraded all packages,
switched to php7, etc.
I've been running OpenBSD since 2.7 so this is a very known pr
On 27/01/2019 2:21 a.m., Gilles Chehade wrote:
On Sat, Jan 26, 2019 at 08:53:06PM -0700, Steve Williams wrote:
Hi,
I upgraded from OpenBSD 6.3 to OpenBSD 6.4 today.?? I upgraded all packages,
switched to php7, etc.
I've been running OpenBSD since 2.7 so this is a very known process.
On 27/01/2019 1:44 p.m., Edgar Pettijohn wrote:
On Sun, Jan 27, 2019 at 09:34:54PM +0100, Mikkel C. Simonsen wrote:
Den 27-01-2019 kl. 19:45 skrev trondd:
On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote:
I'm trying to replace my dieing soekris box with an apu2 dmesg below.
However, I
my server, so it should work fine.
If there are filenames with spaces in them, I think that command won't
work as expected.
Cheers,
Steve Williams
card that is supported by OpenBSD?
I'm not scrimping on money... I anticipate this running for 5+ years.
I've been on OpenBSD since the 2.7 days and have only had 2 different
sets of hardware (retired PC's). This would be the third and the only
"new" system :)
Thanks,
Steve Williams
Thanks!
On 02/01/2017 3:17 AM, Stefan Sperling wrote:
On Sat, Dec 31, 2016 at 11:13:53AM -0700, Steve Williams wrote:
The PC Engines website lists a WLE200NX which google reveals is a Atheros
AR9280 Wireless Mini PCIe 2.4/5 Ghz Dual Band card.
According to athn.4, it should be supported and
Thanks for the input!
Happy New Year :)
Cheers,
Steve Williams
On 31/12/2016 2:29 PM, Eike Lantzsch wrote:
On Saturday, 31 December 2016 11:13:53 PYST Steve Williams wrote:
Hi,
I have decided to modernize my OpenBSD system from an old desktop PC to
something lower power. It seems that the
o use it...
If you feel tied to an ISP because of static IP, I would not hesitate to
go the dynamic route.
Cheers,
Steve Williams
On 02/01/2017 3:05 PM, Peter Fraser wrote:
A charity that I support has been having trouble with its internet provider
(Rogers).
The problem I have is that Roger is
t;
> -Original Message-
> From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of
> Steve Williams
> Sent: Monday, January 2, 2017 6:57 PM
> To: Peter Fraser ; 'misc@openbsd.org'
> Subject: Re: isakmpd set up
>
> Hi,
>
> I have bee
Hi,
I purchased a new PC-Engines APU 2c4 system. I have a wireless card as
well and a msata SSD (250 gig). I've tried the install with all these
two boards installed, none installed and both combinations with no
change in symptoms.
I have tried
OpenBSD current "install60.fs"
OpenBS
erial port install ever, so a learning experience.
Thanks again!
Cheers,
Steve Williams
On 10/01/2017 3:16 PM, Steve Williams wrote:
Hi,
I purchased a new PC-Engines APU 2c4 system. I have a wireless card
as well and a msata SSD (250 gig). I've tried the install with all
these
e index.php, it just doesn't serve
anything up (likely because there's nothing there!).
There's no message in the error.log, and I have tried putting php-fpm
into "debug" mode and there's nothing relevant logged there either.
What am I missing? or is this even possible?
Thanks,
Steve Williams
On 14/02/2017 9:00 AM, Reyk Floeter wrote:
Hi,
On Tue, Feb 14, 2017 at 07:24:17AM -0700, Steve Williams wrote:
Hi,
I have a web based application (Gallery 3) on one web server with a
fairly large number of photos.
I have nfs mounted that folder onto a new APU2 system with OpenBSD 6.0
on it
's no Nextcloud port other than no-one has
done one? (yes, this is a reason, but I'm wondering license, politics,
etc).
From the reading I was able to do, it seems like Nextcloud might be a
smarter investment of time to install than ownCloud.
Thoughts?
Thanks,
Steve Williams
On 2017-02-23 17:01, Johan Huldtgren wrote:
hello,
Is there some reason there's no Nextcloud port other than no-one has
done one? (yes, this is a reason, but I'm wondering license,
politics,
etc).
I've been using owncloud for a few years, but recently switched to
nextcloud
when an upgrade
On 2017-02-23 15:57, Steve Williams wrote:
Hi,
I was going to install the ownCloud package in my OpenBSD server, but
then wondered about Nextcloud. I was surprised there's no Nextcloud
package.
Does anyone know what the status of the 2 projects are in general?
(the non-OpenBSD spe
Hi,
I'm working through configuring Nextcloud and ran into a similar issue.
Since this is running in an OpenBSD chroot environment, you need to have
a /var/www/etc/resolv.conf for DNS resolution to work from within the
chroot.
It might be beneficial to put a hosts file in there as well to re
Yeah!
I'm glad I could help out :)
I get so much from these email lists it's nice to be able to actually
contribute :)
Have a great day.
Cheers,
Steve W.
On 24/02/2017 9:32 PM, Predrag Punosevac wrote:
Steve Williams wrote:
Hi,
I'm working through configuring Nextcloud
Hi,
I'm trying to improve the performance of my freshly installed Nextcloud
site. I'm running on my local 1G network and the performance is less
than optimal.
I've done all the SQL tuning, but from looking at the SQL log files, the
SQL isn't the slow part.
I haven't configured a memory cache
as worthy of mentioning.
If not, at least this email is now in the archives.
Thanks,
Steve Williams
Hi,
It is 1000 times faster (or some value... but wayyy faster) to just ftp
the "ports.tar.gz" file over when compared to using CVS.
Just saying...
Cheers,
Steve Williams
On 11/7/2014 8:47 AM, Jungle Boogie wrote:
Hello All,
# uname -a
OpenBSD jackknife.my.domain 5.6 GENERIC
nd TONS of things I would not normally install...
Having the ports.tar.gz that corresponds to the snapshot you install is
nice because 2 months down the road you can compile/install something
that will work on your system even when there is no package available
that will work on your system.
If you try to cvs up your ports to -current 2 months after installing a
snapshot, odds are that something won't compile. OpenBSD works FANTASTIC
as long as you keep things consistent. Follow base, -current, or
snapshots. Don't try to mix and match and you should have smooth sailing.
That's just been my personal experience. Other people way more
authoritative may have much wiser advice.
Cheers,
Steve Williams
On 20/02/2015 2:19 AM, lm wrote:
> Hi there!
>
> I'm giving a try to snapshots for the first time. The system feels great,
> but I'm having some issues trying to maintain base system and ports synced.
>
> I've got a local copy of the complete packages tree for convenience, so I
> don't have to upda
Hi,
After recently reading (on this list) about how OpenBSD runs under
Virtualbox, I thought I would take it for a test drive on my laptop so I
can work in OpenBSD while away on business & don't have access to the
Internet.
My laptop is a Dell Latitude E6500 with a Intel(R) Core(TM)2 Duo CPU
and reading between the lines to arrive at this solution.
Cheers,
Steve
On 1/6/2013 1:06 PM, Steve Williams wrote:
Hi,
After recently reading (on this list) about how OpenBSD runs under
Virtualbox, I thought I would take it for a test drive on my laptop so
I can work in OpenBSD while aw
On 3/28/2013 10:52 AM, Sarah Caswell wrote:
Hi all,
I had a question about greylisting (with spamd) in production.
I've successfully run spamd on firewalls (as a frontend to either barracuda or
SpamAssassin) and have really liked the reduction in SPAM volume.
Unfortunately my employer's wife
On 3/30/2013 1:12 PM, Scott Vanderbilt wrote:
I think I've done my homework, but apparently the answer eludes me
despite my best intentions to find an answer on my own. So, I throw
myself on the mercy of misc and pray I am not mauled too badly. :-)
I am running 5.3-current (3/22/2013 snapshot)
(in the VM)? Does it have to be in single user mode?
Are there any other things that are going to need to be tweaked other
than /etc/fstab?
Am I going to need to run installboot or some other such utility to get
it to boot correctly after a restore?
Any thoughts of this idea in general?
Thanks,
Steve Williams
Hi,
That's fantastic. Thanks for the information.
Cheers,
Steve Williams
On 10/27/2014 1:35 PM, Josh Grosse wrote:
On 2014-10-27 14:14, Steve Williams wrote:
Hi,
I have an older system on physical hardware that needs upgrading. I've
been procrastinating because it's the typ
On 2/17/2014 11:13 AM, Adam Thompson wrote:
I'm looking for recommendations on what works well for people, since
this doesn't appear to be covered by the FAQ or AOBSD2E. I know
several ways to accomplish what I'm after, but none of them seem to
have any clear advantage over the other.
1. I h
lk to RS-232 (a very un-standard
standard). There are many ways to solve the same problem...
Cheers,
Steve Williams
's just a hobby
so I don't want to spend a huge amount of money on it.
Thanks,
Steve Williams
g the stills together into a video! It's
interesting to see ffmpeg threaded.. it's using 362% of my cpu! It is
making the CPU temperature go up though!
Pretty amazing. Thanks again!
Cheers,
Steve Williams
On 15/11/2021 10:21 a.m., Steve Williams wrote:
Hi,
I have an OpenBSD se
APU vs. a Raspberry
Pi 4B.
Does anyone have a "gut" feeling on the relative performance?
Does the wireless networking work well on the Raspberry as the APU's
wireless is less than optimal :) ?
Thanks for any feedback.
Cheers,
Steve Williams
On 30/11/2021 12:38 a.m., Stuart Henderson wrote:
On 2021-11-30, Steve Williams wrote:
Hi,
I have an APU 2C4 running OpenBSD 7.
I see that the Raspberry Pi 4B is supported by OpenBSD now and I was
thinking of getting one to play with as my APU is my main server and I
don't want to ta
There's mention of using a small SD card as well as having a USB
device for OpenBSD... this doesn't seem to apply to Pi 4 B as there
are only USB ports...
Thanks,
Steve Williams
Hi,
If rsync isn't working correctly, I would just use a cpio(1) to copy
things between the two folders. I haven't used it for years, but in the
days of mixed unix (AIX, SCO Xenix, SCO Unix), cpio always "just worked".
You can do it in a pipe, so there's no intermediate storage. IIRC, you
Hi,
My PCEngines APU died and I need to rebuild my router.
I'm throwing together an old desktop, but ultimately I'd like to use a
Raspberry Pi that I bought to play with.
My network configuration needs 2 wired interfaces. I don't have a switch
that will do vlans, and I don't want to have to con
IC's on it.
Thanks,
Steve Williams
this case, I should have tried :( Thanks for the nudge.
Cheers,
Steve W.
On Mon, Jul 11, 2022 at 4:51 AM Stuart Henderson
wrote:
> On 2022-07-11, Steve Williams wrote:
> > First, I built a Raspberry Pi 4b system with a USB wired NIC and went to
> > restore my backup from Googl
Feifei (??) wrote:
Hi, Nick,
Thanks for you advices,
I clear Grub from my MBR, and flag the OpenBSD partition bootable , but I
also got a "ERR M" error code.
Yes, I read "man biosboot", but I don't know how to resolve it.
I try to reinstall OpenBSD 4.5 again , but it is the same error :(.
2009/
) gallery3, wordpress, roundcubemail, so
it's not super heavy use of mysql.
What is the accepted way to start mysql these days?
Thanks,
Steve Williams
OpenBSD 5.1-current (GENERIC.MP) #230: Mon Apr 2 12:44:39 MDT 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC
On 4/7/2012 1:40 PM, Antoine Jacoutot wrote:
On Sat, Apr 07, 2012 at 01:01:07PM -0600, Steve Williams wrote:
Hi,
I recently updated my system from an ancient 4.6 to the
April 2 snapshot. Let me say, between sysmerge and pkg_add -ui,
it's an amazingly painless process!
This is i386 on a
xplain anything...
Confused in Windows networking land :( Any assistance appreciated!
Thanks,
Steve Williams
https, but the
whole certificate thing takes a bit of bending the brain around!
Good luck.
Steve Williams
m the server, it
won't have gone through the internal interface, so won't even hit the proxy.
What do I need to do to allow ftp to work directly from the firewall?
Thanks,
Steve Williams
your configuration
and restart the install.
At the shell, I can "dhclient bge0" and get network connectivity no
problem. (how I got my dmesg off).
Ideas??
Thanks,
Steve Williams
dmesg:
OpenBSD 4.0-current (RAMDISK_CD) #200: Tue Feb 6 18:04:36 MST 2007
[EMAIL PROTECTED]:/u
Beavis wrote:
Hi guys
Just wanted to ask if any of you have experience putting openbsd 4.0 to a
dell 2650? I tried to boot up using both cd40.iso and floppyB40.fs but it
always says no disks found. haven't seen any scsi drives loaded. I tried an
initial setup using RAID 5 hardware (configured
Nick Holland wrote:
Steve Williams wrote:
Hi,
I have a brand new Dell Poweredge 850 with two 160 G SAS disks attached
to a Perc 5IR controller card.
In the BIOS, I have configured them as an IM (Integrated Mirror) Logical
Volume. I have synchronized the mirror, and the array is
p, and "just worked". I was quite impressed.
They actually have a very good demo site, so you don't even need to
waste time installing software to make an evaluation if it will serve
the purpose or not.
Just thought it was worth mentioning.
Good Luck,
Steve Williams
ay give a clue as to
the last process that (successfully) wrote to /dev/null.
Just my $.02 worth.
Good luck!
Cheers,
Steve Williams
ation with the brconfig command failed.
Can anyone shed any light?
And no, no packets should be getting blocked as I have 2 rules,
pass in all kepp state
pass out all keep state
Thanks,
Steve Williams
Mark Pecaut wrote:
On 5/4/07, Steve Williams <[EMAIL PROTECTED]> wrote:
I now would like to throw squid into the mix acting as a transparent
proxy. I have the squid-transparent port installed. If I change the
...
I have tried everything I can think of to get this to work in bridge
m
think I have eliminated application level
configuration problems. Does anyone have any ideas?? This is driving
me crazy. It shouldn't be so difficult, but then again, it's a computer ;-)
I will include my entire squid.conf & dmesg below:
Thanks for any assistance,
Steve Willia
There are a few suggestions there, none of which have worked for me. I
have no idea why it's not working for me.
Let me know if you get it working!
Cheers,
Steve Williams
. I'm very much a beginner at
this stuff though.
The rest I have no idea about.
Good Luck,
Steve Williams
1 - 100 of 162 matches
Mail list logo
