Hello,
My ISP told me I need to use SLAAC on my OpenBSD firewall to get the IPv6
Address and to use
DHCPv6-PD in order to get my /48 prefix. Now does anyone know how to configure
this in /etc/hostname.em0 ? I didn't find anything in the OpenBSD FAQ. Ideally
my hostname.em0 would then use a /64
Hello,
I am using spamd in greylisting mode and would like to delete the following
entry:
GREY|207.126.144.121|eu1sys200aog106.obsmtp.com|||1376398715|1376400232|1376413115|4|0
I tried the following command:
spamdb -d 207.126.144.121
Unfortunately it does not remove the entry as it is still
ly to allow mail
coming in from this mail server.
Regards,
M.L.
From: Boudewijn Dijkstra
To: misc
Sent: Wednesday,
August 14, 2013 12:39 PM
Subject: Re: remove entry from spamdb greylist
Op
Tue, 13 Aug 2013 17:49:51 +0200 schreef ML mail :
> I am
using
REY until it expires, so maybe I wasn't patient
enough. Anyhow today as I checked this IP is listed under WHITE so it looks
like it finally worked as I wanted.
Regards,
M.L.
From: Peter N. M. Hansteen
To: ML mail
Cc: misc
Sent: Wednesday, August 14,
Hi,
Stupid question but if you would have to choose between two different Intel
CPUs for an OpenBSD firewall using 4 to 6 Intel NICs with all /24 networks
behind and around 50-60 Mbit/s average traffic would you rather choose the CPU
with higher Frequency and less cores or for a CPU with lower
Thanks to all of you for this interesting discussion. My OpenBSD firewall will
only be doing PF as I totally agree that a firewall should have the least
userland application running as possible of course if your budget permits it.
So far I have around 340 rules (as the number of lines in the out
Hi,
On my OpenBSD 4.9 i386 PC there is no serial port so I bought a USB-to-Serial
adapter in the hope to be able to use it but I can't figure out which device in
/dev to use for that. When I connect the adapter I have the following dmesg
entries:
uplcom0 at uhub2 port 1 "Prolific Technology In
Many thanks to all of you for your answers! /dev/ttyU* it is... never used
serial over USB before but now it makes all sense!
From: Otto Moerbeek
To: ML
mail
Cc: "misc@openbsd.org"
Sent:
Tuesday, November 6, 2012 1:29 PM
Subject: Re: USB-to-Serial
Hi,
I want to install OpenBSD 5.2 amd64 with PXE so I downloaded the latest bsd.rd
and pxeboot file from:
ftp://ftp.openbsd.org/pub/OpenBSD/5.2/amd64/
and put it on my TFTP/DHCP server but when I boot this specific files I get the
installer for OpenBSD 5.1 and not 5.2. Is this intentional? or
old 5.1
directory. Really weird but at least now I know.
Thanks for the help!
From: Nick Holland
To: misc@openbsd.org
Sent: Sunday, December 9,
2012 7:20 PM
Subject: Re: Installing 5.2 with PXE
On 12/09/12 11:17, ML mail
wrote:
> Hi,
>
> I want t
Hi,
I have setted up a simple IPSec VPN using the following instructions:
http://www.symantec.com/connect/articles/zero-ipsec-4-minutes
and have noticed that not only my internal networks get routed through the VPN
but also the external IP address of both firewalls. I would like the external
I
Hello,
How do one configure the domain which OpenSMTPD uses by default to speak with
other mail servers? The problem is that my default it takes the internal domain
name of my OpenBSD 5.8 server and therefore other mail servers reject it with
the error:
Sender address rejected: Domain not foun
Great, thank you very much that worked perfectly!
On Monday, February 22, 2016 11:39 AM, Raf Czlonka wrote:
On Mon, Feb 22, 2016 at 10:09:25AM GMT, Jiri B wrote:
> On Mon, Feb 22, 2016 at 09:40:00AM +0000, ML mail wrote:
>
> > Hello,
> >
> > How do one configure th
:
On Mon, Feb 22, 2016 at 09:40:00AM +, ML mail wrote:
> Hello,
>
> How do one configure the domain which OpenSMTPD uses by default to speak with
> other mail servers? The problem is that my default it takes the internal
> domain name of my OpenBSD 5.8 server and therefore oth
Hi,
I just noticed that there is no Ruby version 1.9.3 package anymore in OpenBSD
5.9 (snapshots) although there is still version 1.8.7... Any ideas why? or was
it simply forgotten?
Regards
ML
You mean I should just take the ports.tar.gz file of OpenBSD 5.8 and compile
ruby 1.9 from there?
I don't really know where is this CVS attic that you mention.
On Friday, March 18, 2016 9:55 PM, Jeremy Evans wrote:
On Fri, Mar 18, 2016 at 10:49 AM, ML mail wrote:
> Thanks for
rb'
*** Error 2 in . (exts.mk:64 'ext/bigdecimal/all')
*** Error 2 in /tmp/ruby-build.20160318182812.50827/ruby-1.9.3-p484
(Makefile:569 'build-ext')
Any ideas?
On Friday, March 18, 2016 6:37 PM, Michael McConville wrote:
ML mail wrote:
> I just noticed that the
5:20:26 PM ML mail wrote:
> Hi,
>
> I just noticed that there is no Ruby version 1.9.3 package anymore in
> OpenBSD 5.9 (snapshots) although there is still version 1.8.7... Any ideas
> why? or was it simply forgotten?
>
> Regards
> ML
Ruby 1.9 has been end of life for qu
something? Btw I am
running OpenBSD 5.9 (snapshots).
Regards
ML
On Saturday, March 19, 2016 10:05 AM, Stuart Henderson
wrote:
On 2016-03-18, ML mail wrote:
> You mean I should just take the ports.tar.gz file of OpenBSD 5.8 and compile
> ruby 1.9 from there?
>
>
> I don't reall
OPENBSD_5_8 lang/ruby/1.9
Then I just get:
On Saturday, March 19, 2016 8:16 PM, Nigel Taylor
wrote:
On 03/19/16 17:46, ML mail wrote:
> Hi Stuart,
>
> Thanks for explaining. I now did the following
>
> $ cd /usr
> $ cvs -qd anon...@anoncvs.ca.openbsd.org:/cvs get -P p
er as
suggested, this worked but unfortunately ruby core dumps when I run the "bundle
exec rake snorby:setup RAILS_ENV=production". By the way I am using the ruby
pacakge 2.0 here from OpenBSD.
Regards
ML
On Saturday, March 19, 2016 9:10 PM, ML mail wrote:
My bad, in my CVS example I had
Hello,
I have configured OpenSMTPD on OpenBSD 5.9 with the filter-spamassassin as a
relay for a few of my webapp servers and have the problem when a webapp
suddently sends over 30 mails at the same time. Basically the problem is that
as I have configured spamd with 30 as max-children, as soon a
:30 PM, Joerg Jung wrote:
> Am 18.04.2016 um 16:56 schrieb ML mail :
>
> I have configured OpenSMTPD on OpenBSD 5.9 with the filter-spamassassin as a
relay for a few of my webapp servers and have the problem when a webapp
suddently sends over 30 mails at the same time. Basically the proble
06:23:18PM +0200, Joerg Jung wrote:
> > Am 18.04.2016 um 16:56 schrieb ML mail :
> >
> > I have configured OpenSMTPD on OpenBSD 5.9 with the filter-spamassassin as a
> relay for a few of my webapp servers and have the problem when a webapp
> suddently sends over 30 mails at
Hello,
My OpenBSD 5.9 just got a stack trace and stuck in the prompt "The operating
system has halted". I would like it to reboot automatically in case this
happens again, is this possible?
I got ddb.panic=0 in my /etc/sysctl.conf file but in that very precise case
there was no panic just a stac
Hi
Did anyone already try this DHCARP article
https://sites.google.com/site/bsdstuff/dhcarp in order to run carp with an ISP
providing a dynamic IP address through DHCP? Or is there any easier method for
dealing with a dynamic IP address on the WAN side of the CARP interfaces?
Regards
ML
Hi,
Is it somehow possible to add a random delay of between 5-10 seconds upon a new
incomming connection to OpenSMTPD on OpenBSD?
I am asking this because I sometime have 20 mails all arriving at the same time
and then spamassassin is really slow because it spawns 20 processes and uses
all my
Well right now I have max-children on 50, so you mean lowering this value to
something like 10? But then if I receive 20 simultaneous incoming SMTP
connection, what will happen to the 10 others?Will they fail/timeout or simply
wait?
On Friday, June 10, 2016 11:01 PM, Devin Reade wrote:
resources?
On Friday, June 10, 2016 11:46 PM, Devin Reade wrote:
--On Friday, June 10, 2016 09:04:07 PM + ML mail
wrote:
> Well right now I have max-children on 50, so you mean lowering this value
> to something like 10? But then if I receive 20 simultaneous incoming SMTP
> c
Hi,
Here you are:
$ dd if=/dev/zero of=testfile bs=1M count=1000
1000+0 records in
1000+0 records out
1048576000 bytes transferred in 45.356 secs (23118558 bytes/sec)
Running OpenBSD 5.9 as domU on Xen 4.4 on DELL PowerEdge R410 with two SATA
disks in hardware RAID1 on the dom0.
RegardsML
Hi,
I installed a USB Wifi card on my OpenBSD 5.8 firewall as AP and from time to
time there are timeouts which prevents any access to it anymore until I either
plug out and in the Wifi dongle again or reboot.
Here is the hardware details of that Wifi USB dongle:
athn0 at uhub1 port 4 configu
is there any patches I can try from you?
Regards,
ML
On Tuesday, July 26, 2016 11:38 AM, Adam Wolk wrote:
On Mon, Jul 25, 2016 at 01:31:13PM +0200, Stefan Sperling wrote:
> On Mon, Jul 25, 2016 at 09:57:38AM +0000, ML mail wrote:
> > Hi,
> >
> > I installed a USB Wi
05 PM, "Kapfhammer, Stefan"
wrote:
Hi ML,
in which machine is the usb dongle plugged in?
Alix/Apu1/Apu2? Other?
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 26. Juli 2016 21:59
An: Adam Wolk; Miscellaneous OBSD
Antwort an: ML mail
Bet
, Stefan Sperling wrote:
On Tue, Jul 26, 2016 at 07:57:46PM +, ML mail wrote:
> Should I upgrade to -CURRENT?
Yes!
hn.4
Last line "Bugs":
Host AP mode does not work with USB devices.
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Montag, 25. Juli 2016 12:00
An: Miscellaneous OBSD
Antwort an: ML mail
Betreff: athn0: device timeout with AR9271
Hi,
I installe
Hi,
Will OpenBSD 6.0 support the Intel XL710 network interface cards?
Regards
ML
Thanks to all of you for your feedback.
On Wednesday, August 17, 2016 7:54 PM, Chris Cappuccio wrote:
ML mail [mlnos...@yahoo.com] wrote:
> Hi,
>
> Will OpenBSD 6.0 support the Intel XL710 network interface cards?
>
I think someone was working on the Intel 40Gbps chips
Hello,
I have four /24 subnets and currently have one subnet per ethernet interface
(1Gbit/s) on my openbsd firewall. Now I was wondering if in terms of
performance (especially latency/pps) it is better to have one subnet per
ethernet interface like I have now or to have the four subnets on one
Hi,
The new OpenBSD auto_install with PXE works like a charm and just have 2
questions regarding the install.conf file I did not manage to find out yet:
1) how can I install the bsd.mp instead of the standard bsd image?
2) how can I custom partition my disk (I would like 1 partition for root and
Thanks for the hack, I guess I will wait for this or a similar solution being
implemented into the installer, which hopefully will happen.
On Tuesday, June 24, 2014 9:05 PM, Jiri B wrote:
On Tue, Jun 24, 2014 at 08:10:59AM -0700, ML mail wrote:
> Hi,
>
> The new OpenBSD auto_ins
Hi,
I wanted to know how to enable 802.11n (300 Mbit/s) on my wireless card on
OpenBSD 5.5. I tried using the "mode 11n" option in my hostname.athn0 like this:
up media autoselect mediaopt hostap mode 11n chan 6 nwid MYAP \
but then I get the following error:
ifconfig: unknown IEEE802.11 med
Aha, that's a good point :-) Well thanks for the hint Peter.
On Tuesday, July 1, 2014 5:00 PM, Peter Hessler wrote:
you need to write some/a bunch of code to enable 11n support. OpenBSD
does not have it yet.
On 2014 Jul 01 (Tue) at 07:57:42 -0700 (-0700), ML mail wrote:
:Hi,
:
:I w
Hi,
I'm trying to install OpenBSD 5.5 (amd64) to use as a firewall on a SATA flash
drive of 8 GB. Unfortuantely the drive does not get detected by OpenBSD at the
installation so I am unable to install OpenBSD.
The relevant output of the dmesg would be the following:
"Intel C226 LPC" rev 0x05
dev1 reportid 2 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
On Friday, September 19, 2014 3:39 AM, Chris Cappuccio wrote:
Try OpenBSD 5.6, a workaround was provided in ahci for this issue.
Or, recompile your OpenBSD 5.5 kernel with this patch:
http://openbsd.cs.toron
:
On 09/18/14 12:27, ML mail wrote:
> Hi,
>
> I'm trying to install OpenBSD 5.5 (amd64) to use as a firewall on a
> SATA flash drive of 8 GB. Unfortuantely the drive does not get
> detected by OpenBSD at the installation so I am unable to install
> OpenBSD.
>
> The
No chances neither with a USB key. Could this be a bug in OpenBSD? If yes where
would I report that?
On Friday, September 19, 2014 5:07 PM, ML mail wrote:
A small update: I now have tried switching to IDE mode instead of AHCI in the
BIOS and also have tried two different disk devices (250
Hello,
I need to use the exact version 1.9.2 of Ruby and therefore trying to
compile Ruby on OpenBSD 5.1. My configure command is the following:
./configure --prefix=/usr/local/ruby --with-baseruby=/usr/local/bin/ruby19
Unfortunately the make fails with the following errors:
compiling socket
gmak
Hi,
I read on this very nice tutorial about
pf https://calomel.org/pf_config.html that ACPIv2 and APCI should be enabled
in the BIOS for OpenBSD's firewall to work more efficiently.
Now I wanted to
ask you guys if you really think this should be enabled? and is it really an
advantage? are there
: ACPIv2
* ML mail [2011-10-19 11:37]:
> I read on this very nice tutorial about
> pf https://calomel.org/pf_config.html that ACPIv2 and APCI should be enabled
> in the BIOS for OpenBSD's firewall to work more efficiently.
calomel.org is a collection of bad advice.
> Now I wanted
Hi,
I have an interface with a few IP aliases and I would like to remove just one
single alias IP without affecting any other aliases. Which command would I use
for that?
ifconfig delete
Would this be correct?
Regards,
ML
Hehe yes I have guessed so... Thanks again it worked like a charm!
- Original Message -
From: Alexander Hall
To: ML mail
Cc: "misc@openbsd.org"
Sent: Friday, October 21, 2011 12:18 AM
Subject: Re: Delete just one alias from an interface
On 10/20/11 21:48, Alexander Hall w
Hi,
My firewall just crashed this morning and wondered if anyone maybe had an idea
what could be wrong... It's a soon 3 years old network appliance from Nexcom
loaded with OpenBSD 4.4 i386 on a compact flash card. Below I pasted the
messages from the crash logged in /var/log/messages.
Regards,
Hello,
I am running OpenBSD 4.9 i386 on an Apple Mac mini and these mac mini
have one ethernet as well as one wireless card. I will only be using the
ethernet card so I wanted to be sure that my ath0 is disabled and not all the
time scanning. Basically I would like it to be off so that it doesn't
developers are no longer
familiar with this 3.5-year-old code which has been heavily changed in
the interim, I suggest updating and trying to reproduce..
On 2011-10-24, ML mail wrote:
> Hi,
>
> My firewall just crashed this morning and wondered if anyone maybe had an
> idea what could be wro
mhh, I must be blind! Thanks it worked perfectly by using "disable ath".
- Original Message -
From: Jan Stary
To: "misc@openbsd.org"
Cc:
Sent: Monday, October 24, 2011 10:39 PM
Subject: Re: How to disable wireless card ath0
On Oct 24 12:42:10, ML mail wrote
o
To: Jonathan Gray
Cc: ML mail
; "misc@openbsd.org"
Sent: Tuesday,
October 25, 2011 2:45 AM
Subject: Re: How to disable wireless card ath0
please explain why you bought a Mac!
El 24-10-2011, a las 19:55, Jonathan
Gray escribiC3:
> This is stupid and not required, simply
don
Hello,
I am currently running spamd on an OpenBSD firewall which does greylisting to
protect a qmail linux mail server on a DMZ and was wondering if it would be
possible to have both tasks (firewalling and spamd/greylisting) on two
different physical machines so that the firewall would just do
er 25, 2011 11:29 AM
Subject: Re: dedicating a server to spamd
On
10/25/2011 11:09 AM, ML mail wrote:
> Hello,
>
> I am currently running spamd
on an OpenBSD firewall which does greylisting to protect a qmail linux mail
server on a DMZ and was wondering if it would be possible to h
misc@openbsd.org
Cc:
Sent: Tuesday, October 25, 2011 12:23 PM
Subject: Re:
dedicating a server to spamd
On 25/10/2011 10:57, ML mail wrote:
> That's
what I thought, but how will the valid (non-spam) packets get forwarded
> from
the spamd OpenBSD server to the Linux qmail server (both sitti
box?
-
Original Message -
From: Benny Lofgren
To: ML mail
Cc: "misc@openbsd.org"
Sent: Tuesday,
October 25, 2011 1:37 PM
Subject: Re: dedicating a server to spamd
On
2011-10-25 11.09, ML mail wrote:
> I am currently running spamd on an OpenBSD
firewall which does g
Hi,
I have a small subnet (/29) where the carrier router and my firewall is
connected. The firewall is an OpenBSD 5.0 amd64 firewall which uses the carrier
router as default gateway and which has my own routable /24 network behind it.
Now I have already configured my firewall for CARP but didn'
Afaik, I don't need to have IP forwarding turned on on my laptop or other
device connected to that subnet in order to ping the carrier's router which is
located on that very same subnet.
Regards,
ML
- Original Message -
From: "em...@edylie.net"
To: ML mail ; &q
Hi,
I am running OpenBSD 5.0 amd64 on two firewalls using CARP (one master
and one backup) for redundancy/fail-over purpose. Now on the backup firewall I
noticed that the states synchronised using pfsync on a dedicated NIC with a
cross-over cable are at least double as much as on the master firewa
o keep the states
at a reasonable value on the on the backup firewall with:
set timeout {
adaptive.start 1, adaptive.end 3 }
So despite this small issue, is
the fail-over with keeping states still functional?
Regards,
ML
-
Original Message -
From: Maxim Bourmistrov
To: M
--
resetting
em7: watchdog timeout -- resetting
Does these have anything to do
with this bug or is it maybe another problem?
Regards,
ML
- Original
Message -
From: Maxim Bourmistrov
To: ML mail
Cc: "misc@openbsd.org"
Sent:
Wednesday, November 9, 2011 11:37 AM
Subject:
Hi,
I have a Nexcom NSA-1083 network appliance as firewall which I recently
upgraded to OpenBSD 5.0 amd64 and am still having some delays during booting
because of wd0 timeout. As I was running OpenBSD 4.4 I was told this somehow
might disappear in later releases of OpenBSD but unfortunately it di
@openbsd.org
Cc:
Sent: Tuesday,
November 15, 2011 1:11 PM
Subject: Re: wd0 timeout at boot
On 11/15/11 04:45,
ML mail wrote:
> Hi,
>
> I have a Nexcom NSA-1083 network appliance as
firewall which I recently
> upgraded to OpenBSD 5.0 amd64 and am still having
some delays during booting
>
test
68 matches
Mail list logo