Le 11/03/2020 à 15:51, Wayn0 a écrit :
part of the staff group, datasizr-cur=4096M max infinity
during build on my dual core i7 4xxx it took 17m to build RAM usage really
going over 800mb
35mb binary
not sure it's worth all of that
This is mostly because rust statically link to almost everyth
Hello,
I'm using trunk(4) pseudo device to aggregate my wireless iwm(4) and my
dock ethernet interface ure(4) together.
Since my laptop is not always connected to my dock, when booting I get a
trunk error if the interface is not available:
ifconfig: SIOCTRUNKPORT: Invalid argument
Hopefull
Le 13/03/2020 à 13:23, Raf Czlonka a écrit :> Hi David,
hotplugd(8) might help here.
Thanks, I've heard of it in the past. Can't understand how I did forget
it. That will help me a lot!
Regards,
--
David
Hello,
I'm trying to setup sndiod to record input using my laptop's builtin
microphone but using an USB sound card for output.
The microphone does work correctly because I was able to record some
test using aucat
$ aucat -o test.wav
$ aucat -i test.wav (worked)
To my understanding the o
On Mon, Mar 16, 2020 at 02:41:20PM +0100, Alexandre Ratchov wrote:
Hello,
> Sorry, it's not possible to combine two devices into a single one with
> sndiod.
>
> FWIW, this is because both devices don't use the same clock source, if
> there were combined, audio could be unstable. Properly synchro
On Mon, Mar 16, 2020 at 10:09:50PM +0100, David Demelier wrote:
> It has only one jack yes, but the logo on top of the jack is a headset
> with a microphone but I don't even know if combined output/microphone
> jacks are supported? I never experienced them at all, I don't have a
Le 14/04/2020 à 17:10, Oddmund G. a écrit :
Linux is doomed. Closer 'integration' of systemd, pulseaudio, wayland
Wayland isn't that bad. It solves many things by reducing the display
complexity and is much faster than X.Org. The real problem is by being
simple; many compositors (~= window ma
Le 28/04/2020 à 14:01, Yury Grebenkin a écrit :
OpenBSD gives a better sound experience on my machine than several
Linux distributions I have used and FreeBSD. Just want to say thank
you to all the people involved and state the fact that OpenBSD does
make a difference.
The audio stack is defini
Le 13/07/2020 à 23:39, Justin Muir a écrit :
Hi,
Just wishing to mount my phone to access photos.
Hello,
There is Airdroid application on Android phones that could be
interesting. It's an application that acts as a server and that you
could access from any computer/any os. You simply need t
On Mon, Mar 02, 2020 at 11:49:31AM +0100, Marc Chantreux wrote:
> hello,
>
> coming from linux, i'm used to read manpages
> in a vi buffer so i can do much more than
> reading the content. i basically use
>
> :r !man ls
> or
> !!sh (when the line content is "man ls")
>
> under openbs
Le 02/03/2020 à 17:59, Marc Chantreux a écrit :
i felt dumb reading this as i gave a try to the mandoc man. but i just
double checked:
man mandoc|col -b|grep -w col
Hmmm, here I have it though:
https://man.openbsd.org/mandoc
In the “ASCII Output” paragraph.
--
David
On Tue, 2023-08-01 at 01:00 +0800, ykla wrote:
> Actually, I think it's a bug that OpenBSD cannot create EFI
> partitions manually.
I've installed OpenBSD many times in dualboot with linux (for some
things we can't do right now on OpenBSD such as ESP32 development). And
my take is to install Linux
On Thu, 2023-08-03 at 22:48 +0200, Karel Lucas wrote:
>
> Hi,
>
> My openBSD installation was successful!
Have fun on OpenBSD.
> I first removed all partitions
> except for the EFI partition, which I left.
Sure, the EFI partition isn't supposed to be formatted/recreated but
shared among system
On Wed, 2023-08-09 at 14:01 -0500, mich...@mlpdesign.com wrote:
> Hi everyone
>
> WHAT:
> =
> I greatly respect OpenBSD; while I don't have OS tech level expertise
> to contribute - I do have some design skills and wanted to contribute
> to the community and project.
>
> So I created a new CS
On Thu, 2023-09-28 at 22:41 +0200, Daniele B. wrote:
>
> Hello,
>
> wiz$ mount -t ffs /dev/sd1i /mnt/stick
>
> mount_ffs: /dev/sd1i on /mnt/stick: Invalid argument
Hi,
mount_ffs uses mount(2) which reports errors as errno constants, there
are no one for a specified filesystem type that is not
On Fri, 2023-12-08 at 19:45 +0100, Karel Lucas wrote:
>
>
> Op 08-12-2023 om 19:42 schreef Theo de Raadt:
> > Karel Lucas wrote:
> >
> > > In openBSD V7.4 I would like to see the output of ls in color,
> > > and
> > > therefore would like to know how to configure that. The output of
> > > "man
On Mon, 2023-12-11 at 08:55 +0100, David Demelier wrote:
> On Fri, 2023-12-08 at 19:45 +0100, Karel Lucas wrote:
> >
> >
> > Op 08-12-2023 om 19:42 schreef Theo de Raadt:
> > > Karel Lucas wrote:
> > >
> > > > In openBSD V7.4 I would
> On Jan 12, 2024, at 21:31, Implausibility wrote:
>
> Hi.
>
> Since there's some uncertainty around the future of VMware Fusion on the Mac,
> I've decided to switch to UTM (with QEMU under the covers) -- but I can't
> seem to get OpenBSD .isos (7.3 or 7.4) to boot -- instead, I get dumped i
On Sun, 2024-02-11 at 13:32 +0800, Sadeep Madurange wrote:
> Hello,
>
> Has anyone set up the ESP-IDF for programming ESP32 MCUs?
>
> Should I install dependencies like libmpc using pkg_add, and then
> install the ESP-IDF from their GitHub or put things together using
> xtensa-esp32-elf/* ports a
Hi,
I have a Intel NUC (NUC7CJYHN) which I installed OpenBSD 7.1 on it.
Installation went fine and most of the things work out of the box.
There is a SD card slot on the side that does not seem effective, the
only message I get is:
sdmmc0: can't enable card
There is no kernel activity if I plug
On Mon, 2022-11-21 at 19:13 +1100, Reuben mac Saoidhea wrote:
> > [heres if(3p) for some reason.]
>
> the fact that `man if' goes to a whole man page about a perl thing
> rather than just the sh(1) page, is a bit silly i think.
But you can see that `if` is documented in the 3p category which *is*
Hello,
While searching for sqlite3 I've realized that pkg_info -Q sqlite3
finds some php packages but not everything available in the remote
repository:
# cat /etc/installurl
https://ftp.fr.openbsd.org/pub/OpenBSD/
# pkg_info -Q sqlite3
debug-php-s
On Mon, 2023-01-30 at 11:26 +, Stuart Henderson wrote:
> On 2023-01-30, David Demelier wrote:
> > While searching for sqlite3 I've realized that pkg_info -Q sqlite3
> > finds some php packages but not everything available in the remote
> > repository:
>
> Thi
On Fri, 2023-02-24 at 05:38 +0100, Daniele Bonini wrote:
> Crystal Kolipe wrote:
>
> > > On Mon, Feb 20, 2023 at 05:15:30PM +0100, Daniele Bonini wrote:
> > > > Is it still possible to disable file .core generation at all?
> > > >
> > > > Yes, it is.
> > >
> > > ok, thx
> > >
> > > NB: s
Hello all,
This is my first mail to this list,
I have a very old HP Probook 4510s slowly dying. I have previously
installed FreeBSD on it but got disappointed after several regression
YoY and after upgrade like: no usable touchpad anymore, no more
ethernet, new VT very buggy. As lots of friends k
On 01/18/2017 12:32 PM, Marcus MERIGHI wrote:
Hello,
demelier.da...@gmail.com (David Demelier), 2017.01.18 (Wed) 06:56 (CET):
The only thing I could not get to work actually is the backlight
adjustment. Function keys have no effect, even in GNOME. I also check
wsconsctl display.progress but
Hello,
I have a lenovo thinkcentre machine connected to 24” LG screen (with 4k
resolution), the installer boots fine using UEFI but it looks like efifb takes
a strange “squared” resolution where bottom part of the console is below the
screen so I’m unable to see what I type. I’ve taken a pictur
> On 28 Apr 2022, at 04:06, Mike Larkin wrote:
>
> On Wed, Apr 27, 2022 at 05:07:14PM -0400, Nick Holland wrote:
>> On 4/27/22 9:15 AM, David Demelier wrote:
>>> Hello,
>>>
>>> I have a lenovo thinkcentre machine connected to 24” LG screen (with
&g
Hello,
I have setup a trunk combination on my Pi 4 to aggregate the ethernet
port (bse0) with the wireless port (bwfm0) using the examples in the
documentation:
$ cat /etc/hostname.bse0
up
$ cat /etc/hostname.bwfm0
join "MyAp" wpakey "blablabla"
up
$ cat /etc/hostname.trunk0
trunkproto failover
On Sat, 2022-04-30 at 08:42 +, Stuart Henderson wrote:
> trunk changes the MAC address to that of the first port, and there's
> a fair chance that changing MAC might not work with bwfm.
>
> You could try "lladdr (mac address of bwfm interface)" in
> hostname.trunk0
> and see if that helps.
Hi
Hi there,
Enjoying GNOME 41 on 7.1 (and on an other machine GNOME 42 on -
current), I have encountered two minor issues:
1. The night light seems to have no effect. I don't think it's due to
the use of X.Org rather than wayland, on my Linux machine I also use
GNOME on Xorg without no issue. Don't
Hello,
I'm trying to setup vms using the wonderful vmd and private addresses
on 10.0.0.0 range. Following the various entries in the FAQ (faq16) and
the examples using bridge/vether I just wanted to adapt to using
veb/vport instead since it's designed as a newer and more performant
replacement.
I
On Thu, 2022-05-12 at 06:09 +, Stuart Henderson wrote:
> > vlan0: flags=8002 mtu 1500
> > lladdr e0:d4:64:3c:31:9c
> > index 6 priority 0 llprio 3
> > encap: vnetid none parent iwx0 txprio packet rxprio outer
> > groups: vlan
> > media: IEEE802.11 autosel
> On 20 May 2022, at 18:27, Sandeep Gupta wrote:
>
> Hello,
>
> This post here (
> http://matecha.net/posts/openbsd-on-pi-4-with-full-disk-encryption/) claims
> its possible to
> boot OpenBSD directly from USB without the need for UEFI on sdcard.
> I tried today but couldn't get it to work. I
On Mon, 2022-06-20 at 16:47 +0100, Étienne wrote:
> Hello there,
>
> This is a bit of a long shot, but I'm trying my luck: There used to
> be a
> community thread on Scaleway's documentation website that explained
> how
> to convert a Linux instance to an OpenBSD instance, because no
> OpenBSD
On Wed, 2025-03-05 at 12:13 -0700, nisp1953 wrote:
> Will OpenBSD get a new file system sometime in the future?
Most of the time when you ask if XYZ would ever come at some point
(even outside of OpenBSD) you can't really get a timed response because
as many opensource projects you need people to
36 matches
Mail list logo
