install package gvfs if X, to use with xfce or gnome...
Le 08/02/2018 à 01:18, listo factor a écrit :
> I have a need to mount existing samba shares on a linux box,
> on the openbsd 6.2 computer. There is no use for a samba server
> on it, and I would prefer not to install one. What is the
> appr
I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
4-RS-232 port on same IRQ, but on different address on isa bus. Then i
setup only one port using configure command all ports work normally. But
when i setup 2 of them in one boot configuration i get in dmesg: irq
already in use. I
Chris Bennett(chris...@bennettconstruction.us) on 2018.02.07 21:03:09 -0800:
> Does any of my hardware work in -current?
cd0 at scsibus1 targ 1 lun 0: ATAPI 5/cdrom
removable
your cd-rw drive probably works.
> Lots of stuff fails in 6.2 stable.
> WiFi and touchpad being especially desired, of
> I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
> 4-RS-232 port on same IRQ, but on different address on isa bus. Then i
> setup only one port using configure command all ports work normally. But
> when i setup 2 of them in one boot configuration i get in dmesg: irq
> already
On Wed, Feb 07, 2018 at 09:03:09PM -0800, Chris Bennett wrote:
> OpenBSD 6.2 (GENERIC.MP) #2: Sun Dec 10 21:14:42 CET 2017
>
> r...@syspatch-62-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3774021632 (3599MB)
> avail mem = 3652612096 (3483MB)
the ram will probably
On Thu, Feb 08, 2018 at 02:31:31PM +0500, ?? wrote:
> I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
> 4-RS-232 port on same IRQ, but on different address on isa bus. Then i
> setup only one port using configure command all ports work normally. But
On 02/08/2018 08:58 AM, Stephane HUC "CIOTBSD" wrote:
install package gvfs if X, to use with xfce or gnome...
Unfortunately, this is an "X-less", non-graphic "portal",
the only computer open to the world, and only via ssh,
on a LAN full of Linux and Windows computers that are
samba servers. The
On Thu, Feb 08, 2018 at 11:33:01AM +, listo factor wrote:
> On 02/08/2018 08:58 AM, Stephane HUC "CIOTBSD" wrote:
> > install package gvfs if X, to use with xfce or gnome...
>
> Unfortunately, this is an "X-less", non-graphic "portal",
> the only computer open to the world, and only via ssh,
>
On 2018-02-07, Grzegorz Kowalczyk wrote:
> Hi,
>
> can relayd(8) be used as a plain HTTP proxy (no interception, no
> filtering, SSL/TLS via the CONNECT method)?
No. tinyproxy is probably the simplest existing thing that can do this.
> Then i setup only one port using configure command all ports work normally.
I worked a lot with multiple RS-232 ports boards. They all had some
hardware jumpers to configure the IRQ and Address for each port ( a
lot of jumpers!). Maybe this option is integrated in your board BIOS,
check it.
How
On Thu, Feb 8, 2018 at 1:02 PM, Mihai Popescu wrote:
>
> How did you manage to find and even install 3.8 ?
>
>
To his defense, he didn't say he installed 3.8. Only what he found
something in the 3.8 documentation.
Hi,
I was speculating about another instance of syslogd, just as a log
host services while having base syslogd running on same box.
1. -p /dev/null deletes /dev/null and replaces it with socket file
with same name
crw-rw-rw- 1 root wheel2, 2 Feb 8 13:25 /dev/null
# syslogd -d -F -f
On 02/08/18 04:31, Захаров Анатолий wrote:
> I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
> 4-RS-232 port on same IRQ, but on different address on isa bus. Then i
> setup only one port using configure command all ports work normally. But
> when i setup 2 of them in one boot
Intel provided stable microcode for Skylake mitigating Spectre variant 2.
Current status
https://newsroom.intel.com/wp-content/uploads/sites/11/2018/02/microcode-update-guidance.pdf
When it comes to Meltdown:
Does OpenBSD is going to release patches for 6.2? I don't see anything related
to Meltdo
On Thu, Feb 8, 2018, at 7:02 AM, Mihai Popescu wrote:
> > Then i setup only one port using configure command all ports work normally.
>
> I worked a lot with multiple RS-232 ports boards. They all had some
> hardware jumpers to configure the IRQ and Address for each port ( a
> lot of jumpers!). Ma
On Wed, Feb 07, 2018 at 09:03:09PM -0800, Chris Bennett wrote:
> Does any of my hardware work in -current?
>
> OpenBSD 6.2 (GENERIC.MP) #2: Sun Dec 10 21:14:42 CET 2017
>
> r...@syspatch-62-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
Hi misc@,
I looked through previous discussions on whether a SWAP partition
should be inside or outside the RAID partition when making a crypto
softraid.
The only argument I stumbled into was that it should be outside because
swap is encrypted anyhow and it would be unnecessary to double-encrypt
Chris, install -current on USB key and boot from it.
Ve.
Hi!
If I understand mount(8) (http://man.openbsd.org/mount) right, FFS
mounts have a metadata I/O mode and a data I/O mode. By default,
metadata is accessed synchronously and data is accessed
asynchronously.
"-o sync" will force both to synchronous mode, and "-o softdep" would
change the metadata
On Thu, February 8, 2018 1:49 pm, Tinker wrote:
> Hi misc@,
>
> I looked through previous discussions on whether a SWAP partition
> should be inside or outside the RAID partition when making a crypto
> softraid.
>
> The only argument I stumbled into was that it should be outside because
> swap is e
Afaik swap is encrypted anyway on OpenBSD
On 8 Feb 2018 6:52 PM, "Tinker" wrote:
Hi misc@,
I looked through previous discussions on whether a SWAP partition
should be inside or outside the RAID partition when making a crypto
softraid.
The only argument I stumbled into was that it should be out
Also use noatime mount option so whe reading files you are not updating
access time
On 8 Feb 2018 7:36 PM, "Tinker" wrote:
> Hi!
>
> If I understand mount(8) (http://man.openbsd.org/mount) right, FFS
> mounts have a metadata I/O mode and a data I/O mode. By default,
> metadata is accessed sync
Also use noatime mount option so whe reading files you are not updating
access time
Ie there would be writes to disk everytime u access a file if noatime is
not set
On 8 Feb 2018 7:36 PM, "Tinker" wrote:
> Hi!
>
> If I understand mount(8) (http://man.openbsd.org/mount) right, FFS
> moun
>When it comes to Meltdown:
>Does OpenBSD is going to release patches for 6.2? I don't see anything related
>to Meltdown in errata, but maybe it is too early. I understand other OSes
>received disclosed information about bug a few months earlier.
amd64 snapshots contain a fix, which is undergoing
hello misc,
I am considering a move to OpenBSD, since I subscribed to this mailing list
some time ago (~few months). I want to take advantage of security.
However, a programmer who I know personally and respect considers OpenBSD
to be old-school, in a negative sense. He recommends Arch Linux as
s
Hello, I'm very new to the OpenBSD OS, I found a bug in the inteldrm driver and
I want to send it with sendbug. Probably something needs to be configured to
actually send out the message, because I sent the bug report, but it only
landed in my local mailbox. The question is what should I configu
Hi,
OpenBSD has a clear and proactive stance when it comes to security,
while Arch does not. If you want to stay atop of new developments, feel
free to try -current. If you need a very stable environment, go with
-stable. Don't expect to find that latter one in Arch, as it works with
a rolling rel
If your programmer friend has any source code patches he would like to
submit then I am sure the project would love to have them.
On Thu, Feb 8, 2018 at 4:58 PM Charlie Eddy
wrote:
> hello misc,
>
> I am considering a move to OpenBSD, since I subscribed to this mailing list
> some time ago (~few
https://www.openssl.org/docs/man1.0.2/crypto/X509_VERIFY_PARAM_set1_host.html
They say they NEED this because they can delete a whole load of code
that could have security bugs.
Perhaps I am wrong but upon a quick glance, doesn't this just boil
down to some simple ORing?
How does this sit with
h
Hi Zolt
you can open the message on a command terminal ... copy and paste
the message manually into a working email client,
make sure the subject and email addresses are consistent
I hope this helps ...
Tom Smyth
On 8 February 2018 at 21:37, Zsolt Kantor wrote:
> Hello, I'm very new to the Ope
On Thu, 8 Feb 2018 13:41:20 -0800
Charlie Eddy wrote:
> hello misc,
>
> I am considering a move to OpenBSD
Where from?
>
> However, a programmer who I know personally and respect considers
> OpenBSD to be old-school, in a negative sense. He recommends Arch
> Linux as superior, because more ne
On Thu, 8 Feb 2018 13:41:20 -0800
> Does the difference boil down to one's
> definition of free software, and then compliance with that definition?
There is a huge difference. Arch is at the whim of Linux which is far
behind even the Windows kernel in mitigations (which is far
behind OpenBSD) be
Hi Charlie,
https://sivers.org/openbsd is another good site to view :)
@Joren that is commitment the Tat :)
Thanks
Tom Smyth
On 8 February 2018 at 22:12, Jeroen wrote:
> Hi,
>
> OpenBSD has a clear and proactive stance when it comes to security,
> while Arch does not. If you want to stay atop o
On Thu, 8 Feb 2018 19:39:39 +
> Afaik swap is encrypted anyway on OpenBSD
It is with a random key which is actually more secure than the softraid
key.
However to the OPS question relating to dumps.
I believe the answer is that dumps are helpful and OpenBSD is a
developer system primarily b
Hello all,
I've been reading into the signify(1) program a little recently, and the
manual page mentons the '-t' option, which is used to ensure the public
key deduced from the signature comment "matches /etc/signify/*-keytype.pub",
where 'keytype' is the argument given to '-t'. I'm not sure what
Thanks kevin i missed the dump part... agree with disable dump on prod
..enable on dev
On 8 Feb 2018 22:51, "Kevin Chadwick" wrote:
> On Thu, 8 Feb 2018 19:39:39 +
>
>
> > Afaik swap is encrypted anyway on OpenBSD
>
> It is with a random key which is actually more secure than the softraid
>
multiplex'd wrote:
> Hello all,
>
> I've been reading into the signify(1) program a little recently, and the
> manual page mentons the '-t' option, which is used to ensure the public
> key deduced from the signature comment "matches /etc/signify/*-keytype.pub",
> where 'keytype' is the argument gi
On Thu, 8 Feb 2018 13:41:20 -0800
Charlie Eddy wrote:
> hello misc,
>
> I am considering a move to OpenBSD, since I subscribed to this
> mailing list some time ago (~few months). I want to take advantage of
> security.
>
> However, a programmer who I know personally and respect considers
> Open
On Feb 8, 2018 4:26 PM, Tom Smyth wrote:
>
> Hi Zolt
>
> you can open the message on a command terminal ... copy and paste
> the message manually into a working email client,
> make sure the subject and email addresses are consistent
>
> I hope this helps ...
> Tom Smyth
>
> On 8 February 2018 a
Thanks Daniel. Definitely the correct answer.
On Thu, Feb 8, 2018 at 4:07 PM, Daniel Bolgheroni
wrote:
> On Thu, Feb 08, 2018 at 09:41:20PM +, Charlie Eddy wrote:
> > hello misc,
> >
> > I am considering a move to OpenBSD, since I subscribed to this mailing
> list
> > some time ago (~few mon
On Thu, Feb 08, 2018 at 09:41:20PM +, Charlie Eddy wrote:
> hello misc,
>
> I am considering a move to OpenBSD, since I subscribed to this mailing list
> some time ago (~few months). I want to take advantage of security.
>
> However, a programmer who I know personally and respect considers Op
On 8 Feb 2018 23:23, "Steve Litt" wrote:
On Thu, 8 Feb 2018 13:41:20 -0800
Charlie Eddy wrote:
> hello misc,
>
> I am considering a move to OpenBSD, since I subscribed to this
> mailing list some time ago (~few months). I want to take advantage of
> security.
>
> However, a programmer who I kno
On Thu, Feb 08, 2018 at 01:41:20PM -0800, Charlie Eddy wrote:
> hello misc,
>
Hi!
> I am considering a move to OpenBSD, since I subscribed to this mailing list
> some time ago (~few months). I want to take advantage of security.
>
Good, go ahead, all doors are open.
> However, a programmer wh
On 02/08/18 19:28, mazocomp wrote:
On Thu, Feb 08, 2018 at 01:41:20PM -0800, Charlie Eddy wrote:
hello misc,
Hi!
I am considering a move to OpenBSD, since I subscribed to this mailing list
some time ago (~few months). I want to take advantage of security.
Good, go ahead, all doors are op
Yes, thanks for the hint. I thought about this. Actually in theory is more
simple to use directly the sendbug command, but for that you need to configure
a server (smtp I think). And I do not want to spend days now to learning how to
do it. So I will do at the simple way, as you told me.
Thanks
Thanks for the answer.
On Friday, February 9, 2018 1:29 AM, "ed...@pettijohn-web.com"
wrote:
On Feb 8, 2018 4:26 PM, Tom Smyth wrote:
>
> Hi Zolt
>
> you can open the message on a command terminal ... copy and paste
> the message manually into a working email client,
> make sure th
46 matches
Mail list logo
