Hi Holger,
You might want to use something like this in your
/etc/rc.local:
pf=/etc/pf.local.conf
if pfctl -nf ${pf}; then
pfctl -f ${pf}
fi
This would make the regular /etc/pf.conf a fallback, if
pf.local.conf doesn't load.
Just a suggestion, of course.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Sun, 13 Sep 2015 21:12:37 -0400
Quartz wrote:
> > hi all .
> >
> > i make bootable openbsd USB stick by ordinaly installatin .
> >
> > if i can make bootable CD from this USB , it is very happy .
> >
> > are there any methods ?
> >
> > is linux'
On 08/28/15 16:53, Lars wrote:
>
> There is a barebone system from Shuttle DS437 that fits your requirements. I
> don't know it so I can not tell if it works as workstation.
>
I am using the DS437 as a firewall, network tunnel, spam filter and
internal DNS/DHCP server at home. Performance is fi
Hi there!
Having upgraded to last nights snapshots I am now faced with an only
partially working system: Neither is a cvs-update possible nor does X
start. I get the error messageâ at start"ssh-keygen: can't load library
'libcrypto.so.36.0'" and this library is required for cvs and X as well.
W
âI just noticed that X requests 'libssl.so.37.0' in order to create a
cookie. Thus this may be a different issue.
Gesendet von meinem BlackBerry 10-Smartphone.
Von: Stefan WollnyGesendet: Montag, 14. September 2015 12:24An:
misc@openbsd.orgBetreff: OpenSSL can't load library '
Hi there!
Havin
>Having upgraded to last nights snapshots I am now faced with an only
>partially working system: Neither is a cvs-update possible nor does X
>start. I get the error messageâ at start"ssh-keygen: can't load library
>'libcrypto.so.36.0'" and this library is required for cvs and X as well.
>What sh
On Mon, Sep 14, 2015 at 12:24 PM, Stefan Wollny wrote:
> Having upgraded to last nights snapshots I am now faced with an only
> partially working system: Neither is a cvs-update possible nor does X
> start. I get the error message at start"ssh-keygen: can't load library
>d 'libcrypto.so.36.0'" an
Thank you for the advice... I was afraid that this would be the way to go as
for once I only have this machine at hand. Sigh...
My fault.
Anyway: I appreciate your gift of creating such a fine OS and let the world
participate!
Happy hacking,
STEFAN
Gesendet von meinem BlackBerry 10-Smartph
Hi,
I am trying to implement diskless setup in VLAN-segmented network.
Server which hosts dhcpd, tftpd, nfsd, rarpd and bootparamd is on
10.30.7.38/27, on separate vlan from client which should be on
10.30.7.51/27.
Client obtains IP address, executes pxeboot and boots bsd from tftp
successfully.
I'm just trying out OpenBSD 5.7 on a Toshiba Satellite Pro C660D
laptop.
It seems to work almost perfect, but I'm not able to find any way
to control screen brightness. The display just stays at some
predefined level set during power on.
Hotkey controls (Fn+F6, Fn+F7) do not work.
Command line
On Sat, Sep 12, 2015 at 03:51:36PM +, Dewey Hylton wrote:
> the only real differences i see are:
> 1) bios revision
> 2) secondary disk attached to different sata port
> 3) sensors only present on working machine
I've had this issue with the same systems. Never guessed it would be OpenBSD
sp
Kurt Mosiejczuk se.rit.edu> writes:
>
> On Sat, Sep 12, 2015 at 03:51:36PM +, Dewey Hylton wrote:
>
> > the only real differences i see are:
> > 1) bios revision
> > 2) secondary disk attached to different sata port
> > 3) sensors only present on working machine
>
> I've had this issue wit
Patrick Dohman comcast.net> writes:
>
> Any thermal settings in the bios? CPU performance, Fan Speed etc..
>
> Does the fan idle correctly? Often intel chipsets will throttle the fan
during a bios test.
>
> Perhaps ACPI is not routing an interrupt??
Not much is available to be tweaked in this
Kurt Mosiejczuk [kurt-open...@se.rit.edu] wrote:
>
> Hearing that Linux doesn't trip it, I'm wondering if it's an ACPI difference
> between OpenBSD and Linux. Perhaps OpenBSD runs the CPU hotter before
> turning it back over to the BIOS on reboot?
>
OpenBSD 5.8-current enters deeper C states th
On Mon, Sep 14, 2015 at 05:15:01PM +, Dewey Hylton wrote:
> > I've had this issue with the same systems. Never guessed it would
> > be OpenBSD specific. What I've found to make it stop happening is
> > pulling the board out and redoing the thermal paste for the CPU
> > heatsink. I had found
On Fri, Sep 11, 2015 at 06:38:23PM -0400, dewey.hyl...@gmail.com wrote:
> hi all. i???m having difficulty with this board:
>
> Supermicro X7SPE-HD-D525 rev1
>
> i have several similar systems, each running an older version of OpenBSD for
> a few years without incident. except this one ???
>
> r
Hi Stuart,
Thank you very much for this hint: cvs is just now updating the sources.
Will proceed as suggested.
Again thank you and have a nice hacking-week!
STEFAN
Gesendet von meinem BlackBerry 10-Smartphone.
Originalnachricht
Von: Stuart Henderson
Gesendet: Montag, 14. September 2015 19
Mike Larkin azathoth.net> writes:
>
> On Fri, Sep 11, 2015 at 06:38:23PM -0400, dewey.hylton gmail.com wrote:
> > hi all. i???m having difficulty with this board:
> >
> > Supermicro X7SPE-HD-D525 rev1
> >
> > i have several similar systems, each running an older version of OpenBSD
for a few y
Kurt Mosiejczuk se.rit.edu> writes:
>
> On Mon, Sep 14, 2015 at 05:15:01PM +, Dewey Hylton wrote:
>
> > > I've had this issue with the same systems. Never guessed it would
> > > be OpenBSD specific. What I've found to make it stop happening is
> > > pulling the board out and redoing the t
> # sysctl -a|grep 'sensors.*temp'
> hw.sensors.cpu0.temp0=30.00 degC
> hw.sensors.lm1.temp0=0.00 degC
> hw.sensors.lm1.temp1=14.00 degC
> hw.sensors.lm1.temp2=14.00 degC
> # reboot
>
> BEEEP!
Oh that is interesting. Can you try disabling the lm(4) driver in
your kernel? You can do:
Dewey Hylton gmail.com> writes:
> # sysctl -a|grep 'sensors.*temp'
> hw.sensors.cpu0.temp0=31.00 degC
> hw.sensors.lm1.temp0=48.00 degC
> hw.sensors.lm1.temp1=52.50 degC
> hw.sensors.lm1.temp2=36.00 degC
> # reboot
>
> and meet with success ... if i wait just a few minutes (2) i end up with th
Mark Kettenis xs4all.nl> writes:
>
> > # sysctl -a|grep 'sensors.*temp'
> > hw.sensors.cpu0.temp0=30.00 degC
> > hw.sensors.lm1.temp0=0.00 degC
> > hw.sensors.lm1.temp1=14.00 degC
> > hw.sensors.lm1.temp2=14.00 degC
> > # reboot
> >
> > BEEEP!
>
> Oh that is interesting. Can you t
22 matches
Mail list logo
