On Sat, Nov 08, 2014 at 10:43:52PM -0800, Eric Lalonde wrote:
> Hello,
>
> I recently upgraded from 5.5 to 5.6. I was surprised to see that the
> various apparently sendmail-specific files in /etc/mail are not in the
> ‘Files to delete and move’ list in upgrade56.html, now that sendmail
> is no lo
Hi,
I recently upgraded to 5.6, and got problems with icmpv6
I have a gif tunnel for IPv6:
[root@fremen root]# ifconfig gif0
On Sat, Nov 08, 2014 at 10:57:41PM +0200, Atanas Vladimirov wrote:
> On 24.10.2014 00:33, Robert Peichaer wrote:
>
> I'm following -current and decided to try autoinstall(8) from
> /auto_upgrade.conf when I moved to newer snapshot.
> I made a custom auto_upgrade.conf on my root [sd2a] partition bu
Hi,
Henrik Friedrichsen wrote:
Okay, a suspend & resume cycle seems to have fixed it somehow.
if you check the archives, I think I rised the same issue with my
ThinkPad T60. The annoyance is that you always need a suspend/resume
cycle, after every boot.
It looks like the max value is "off".
On Sun, 9 Nov 2014 10:09:49 +0100 =?utf-8?Q?S=C3=A9bastien?= Marie
wrote:
> On Sat, Nov 08, 2014 at 10:57:41PM +0200, Atanas Vladimirov wrote:
> > On 24.10.2014 00:33, Robert Peichaer wrote:
> >
> > I'm following -current and decided to try autoinstall(8) from
> > /auto_upgrade.conf when I moved
On 09.11.2014 12:59, thev...@openmailbox.org wrote:
On Sun, 9 Nov 2014 10:09:49 +0100 =?utf-8?Q?S=C3=A9bastien?= Marie
wrote:
On Sat, Nov 08, 2014 at 10:57:41PM +0200, Atanas Vladimirov wrote:
> On 24.10.2014 00:33, Robert Peichaer wrote:
>
> I'm following -current and decided to try autoinstal
On 2014-11-08 11:18, Pieter Verberne wrote:
On 2014-11-07 14:35, Pieter Verberne wrote:
My problem:
`ping6 fe80::200:24ff:fecd:7df8%pppoe0` with pf disabled is no
problem.
ping6, with pf enabled and 'set skip on lo0' does not work very well:
I could reproduce this very easily with a clean -
On 2014-11-07, Steve Williams wrote:
>
> Having the ports.tar.gz that corresponds to the snapshot you install is
> nice because 2 months down the road you can compile/install something
> that will work on your system even when there is no package available
> that will work on your system.
>
> I
Hello ,
I'm trying to set up an ipsec connection from my Blackberry Z30 to
Openbsd 5.6.
I'm new to openbsd ipsec.
When setting up the connection I do see my requests go to the server,but the
vpn tunnel is
not established.
Any help would be greatly appreciated !
ikev2 "bb10" esp \
from 1
Hi,
I've installed OpenBSD 5.6 (i386) on a dual processor XEON box which
has a 4 port Sun (Sun# 501-6738-10) Gigabit NIC card. dmesg doesn't
have any indication that the card is installed. Booting Linux shows
the card as Sun/Cassini which I believe should be handled by the "cas"
driver.
pcidump
Rafael,
Thanks for responding. Here are the outputs that you
requested:
dmesg:
OpenBSD 5.6 (GENERIC.MP) #299: Fri Aug 8 00:10:33 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
On Sunday, November 9, 2014, Lampshade wrote:
> Hi
> I was trying half year ago to use OpenBSD 5.5, but system heated my
> laptop. I have Intel and Nvidia GPU in laptop. I can not disable Nvidia GPU
> via BIOS. Laptop always exposes and enables two GPUs by default. OpenBSD
> does not disabled Nv
Hello
I am thinking of taking the plunge and following current.
It all seems straightforward.
I have looked at the FAQ's and other sources.
I understand that it goes like this (simplistically):
Get a new snapshot from mirror
Sysmerge etc/xetc
Cp bsd.rd to /
Boot in
On 11/09/14 19:09, Theodore Wynnychenko wrote:
Hello
I am thinking of taking the plunge and following current.
It all seems straightforward.
I have looked at the FAQ's and other sources.
I understand that it goes like this (simplistically):
Get a new snapshot from mirror
Sysmerg
> Hi,
>
> I've installed OpenBSD 5.6 (i386) on a dual processor XEON box which
> has a 4 port Sun (Sun# 501-6738-10) Gigabit NIC card. dmesg doesn't
> have any indication that the card is installed. Booting Linux shows
> the card as Sun/Cassini which I believe should be handled by the "cas"
> dri
Hi people,
I'm trying to record audio from my Thinkpads internal microphone
on -current (-ish, but as far as I see, there are no sound related
changes missing). The audio device is:
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
I see that xHCI has been enabled in -current and I'd like to start testing
on my system, but the driver is not attaching:
"Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
I know xHCI is brand-new and under heavy development; is it expected to
support this controller at this
Hello,
I've upgraded my 5.4 server to 5.5 and then 5.6 and have switched
from nginx to httpd. This is all excellent.
I wanted to share how I made httpd work for me. I host a simple
static site, but also need '301 Moved Permanently' support, which
httpd does not seem to support at this time. Howev
Miod,
Thanks!
I've made progress. OpenBSD now recognizes the four cas NIC's
and detects active/no carrier, but won't pass any traffic. I suspect
that it's because the mac addr (lladdr) is all zero's
Jeff
On Sun, Nov 09, 2014 at 07:43:15PM +, Miod Vallat wrote:
> > Hi,
Everytime /etc/netstart runs I get a no closing quote message.
Hate to obsess about trivialities but wondering If I've messed something up.
All interfaces seem to work just fine.
--
Those who do not understand Unix are condemned to reinvent it, poorly.
On 11/09/2014 02:30 PM, h410g3n wrote:
> I encountered the same problem.
>
> You must have just upgraded from 5.5 and forgot to run sysmerge, right? :D
>
> Jason Adams wrote:
>> Everytime /etc/netstart runs I get a no closing quote message.
>>
>> Hate to obsess about trivialities but wondering If I
On Sun, Nov 9, 2014 at 2:33 PM, Jason Adams wrote:
> On 11/09/2014 02:30 PM, h410g3n wrote:
>> I encountered the same problem.
>>
>> You must have just upgraded from 5.5 and forgot to run sysmerge, right? :D
>>
>> Jason Adams wrote:
>>> Everytime /etc/netstart runs I get a no closing quote message
On Sun, Nov 09, 2014 at 03:54:50PM -0500, Joe Gidi wrote:
> I see that xHCI has been enabled in -current and I'd like to start testing
> on my system, but the driver is not attaching:
>
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> OpenBSD 5.6-current (GENERIC.MP) #5
On 11/09/2014 03:19 PM, Philip Guenther wrote:
> On Sun, Nov 9, 2014 at 2:33 PM, Jason Adams wrote:
>> On 11/09/2014 02:30 PM, h410g3n wrote:
>>> I encountered the same problem.
>>>
>>> You must have just upgraded from 5.5 and forgot to run sysmerge, right? :D
>>>
>>> Jason Adams wrote:
Every
Let me start rapidly ;)
Index: usb/umsm.c
===
RCS file: /cvs/src/sys/dev/usb/umsm.c,v
retrieving revision 1.100
diff -u -p -d -h -p -r1.100 umsm.c
--- usb/umsm.c 12 Jul 2014 21:24:33 - 1.100
+++ usb/umsm.c 9 Nov 2014 23:52:30 -000
Hi,
Here is the output from dmesg after the kernel rebuild:
OpenBSD 5.6 (CASSINI) #1: Sun Nov 9 16:38:22 EST 2014
r...@firewall-m.rtr.com:/usr/src/sys/arch/i386/compile/CASSINI
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.66 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,
On Sun, Nov 9, 2014 at 4:17 PM, Jason Adams wrote:
> Definitely no quoted anything with white space in any hostname.if.
> If fact even when they only have one parameter: dhcp, this happens.
>
> And it happens very near the top of netstart
> ---
> # sh -x /etc/netstart
> + [ -n
On 11/09/2014 04:54 PM, Philip Guenther wrote:
> On Sun, Nov 9, 2014 at 4:17 PM, Jason Adams wrote:
>> Definitely no quoted anything with white space in any hostname.if.
>> If fact even when they only have one parameter: dhcp, this happens.
>>
>> And it happens very near the top of netstart
>> ---
Hey,
I went through and update to 5.6 from 5.5 on my VPS from ARP Networks
(qemu). Update seemed to go well, except now my box halts shortly after
initializing USB devices.
(message continued below dmesg)
booting hd0a:/bsd: 7721392+2124652+1096312+0+609056
[100+554112+368667]=0xfe6368
entry poin
29 matches
Mail list logo
