e in VIA platforms.
-Original Message-
From: Imre Oolberg <[EMAIL PROTECTED]>
To: misc@openbsd.org
Subject: [Fwd: [Fwd: setting up a noiseless workstation]]
Date: Sun, 03 Feb 2008 01:23:08 +0200
But I am surprised people aint using much VIA low-power offerings like
C3, Eden or C7
On Sun, Feb 03, 2008 at 01:23:08AM +0200, Imre Oolberg wrote:
> But I am surprised people aint using much VIA low-power offerings like
> C3, Eden or C7 in a form of mini-itx motherboard.
I was using during almost 2 years VIA C3-700 - and this one didn't need any
cooler (the stronger ones needed.
regards,
Imre
Original Message
Subject: setting up a noiseless workstation
Date: Fri, 01 Feb 2008 20:16:49 +0200
From: Imre Oolberg <[EMAIL PROTECTED]>
To: misc@openbsd.org
Hallo!
I am thinking of setting up for myself a noiseless workstation ie
without moving parts
> 2008/2/1, Zbigniew Baniewski <[EMAIL PROTECTED]>:
>> You can use old Pentium II 400 MHz - there are still many of them
>> available,
>> which doesn't need any cooler, its radiator will do. Such way the only
>
> And where do you get a PCI graphics card with DVI capable of doing
> 1920x1200?
Every
Martin Schrvder <[EMAIL PROTECTED]> wrote:
> And where do you get a PCI graphics card with DVI capable of doing 1920x1200?
Matrox Millennium P690 PCI. X.org doesn't have a driver for it, though.
--
Christian "naddy" Weisgerber [EMAIL PROTECTED]
Zbigniew Baniewski wrote:
On Fri, Feb 01, 2008 at 08:16:49PM +0200, Imre Oolberg wrote:
As an operating system my first choice would OpenBSD and second is Linux.
In fact at the moment i run such a kind of setup using Linux but i feel
need to upgrade my hardware, i have old 700 MHz Celeron, 1
On Fri, Feb 01, 2008 at 11:32:59PM +0100, Martin Schrvder wrote:
> > You can use old Pentium II 400 MHz - there are still many of them available,
> > which doesn't need any cooler, its radiator will do. Such way the only
>
> And where do you get a PCI graphics card with DVI capable of doing
> 192
Hello!
> but i am not sure it is the best chioce to build on. As an operating
> system my first choice would OpenBSD and second is Linux. In fact at the
> moment i run such a kind of setup using Linux but i feel need to upgrade
> my hardware, i have old 700 MHz Celeron, 19" monitor (1024x768) and
2008/2/1, Zbigniew Baniewski <[EMAIL PROTECTED]>:
> You can use old Pentium II 400 MHz - there are still many of them available,
> which doesn't need any cooler, its radiator will do. Such way the only
And where do you get a PCI graphics card with DVI capable of doing 1920x1200?
Best
Martin
On 01/02/2008, Darrin Chandler <[EMAIL PROTECTED]> wrote:
> I've also been looking at case cooling methods such as:
> http://atechfabrication.com/HTPC_cases.htm
>
> Solid, thick case with fins, and heatpipes to thermally connect CPU/GPU
> to the case. Anybody use anything like this before?
That (
On Fri, Feb 01, 2008 at 08:58:59PM +0100, Henning Brauer wrote:
> i have no CRTs in regular use any more :)
Mine keep coming out from the garage when it's too cold in the winter
and getting replaced with LCDs again when the AC fails to keep it cool
enough in the summer...
Good (and nowadays very c
On Fri, Feb 01, 2008 at 08:09:07PM +0100, Zbigniew Baniewski wrote:
> You can use old Pentium II 400 MHz - there are still many of them available,
> which doesn't need any cooler, its radiator will do. Such way the only
> moving part would be PS-fan, which you can slow down a little, using
> a re
On Fri, Feb 01, 2008 at 08:41:42PM +0100, Stefan Krah wrote:
> Imre Oolberg <[EMAIL PROTECTED]> wrote:
> > I am thinking of setting up for myself a noiseless workstation ie
> > without moving parts or at least with minimal amount of them. The
> > intension is to make it an X-terminal booting from
* Jussi Peltola <[EMAIL PROTECTED]> [2008-02-01 20:56]:
> On Fri, Feb 01, 2008 at 08:13:07PM +0100, Henning Brauer wrote:
> > * Imre Oolberg <[EMAIL PROTECTED]> [2008-02-01 19:17]:
> > > I am thinking of setting up for myself a noiseless workstation
> >
> > I have that - easily. It is in another r
On Fri, Feb 01, 2008 at 08:13:07PM +0100, Henning Brauer wrote:
> * Imre Oolberg <[EMAIL PROTECTED]> [2008-02-01 19:17]:
> > I am thinking of setting up for myself a noiseless workstation
>
> I have that - easily. It is in another room.
> with DVI and USB it is easy to get 10m and a wall between y
Imre Oolberg <[EMAIL PROTECTED]> wrote:
> I am thinking of setting up for myself a noiseless workstation ie
> without moving parts or at least with minimal amount of them. The
> intension is to make it an X-terminal booting from local network,
> preferable root-over-nfs thru pxe since i am most
* Imre Oolberg <[EMAIL PROTECTED]> [2008-02-01 19:17]:
> I am thinking of setting up for myself a noiseless workstation
I have that - easily. It is in another room.
with DVI and USB it is easy to get 10m and a wall between you and the
machine.
--
Henning Brauer, [EMAIL PROTECTED], [EMAIL PROTEC
On Fri, Feb 01, 2008 at 08:16:49PM +0200, Imre Oolberg wrote:
> As an operating system my first choice would OpenBSD and second is Linux.
> In fact at the moment i run such a kind of setup using Linux but i feel
> need to upgrade my hardware, i have old 700 MHz Celeron, 19" monitor
> (1024x768) an
18 matches
Mail list logo
