Hi Mark
On 2/3/07, Mark Kettenis <[EMAIL PROTECTED]> wrote:
Regarding the high interrupt load on the v210; try disconnecting the
CD-ROM/DVD-ROM.
Removing the CD drives silenced the interrupts, and the CPU load
dropped to 0%, thanks.
Can you try the attached diff? It has some debug printf's
Can you try the attached diff? It has some debug printf's in there,
so please send me a dmesg.
Regarding the high interrupt load on the v210; try disconnecting the
CD-ROM/DVD-ROM.
Index: mii/eephy.c
===
RCS file: /cvs/src/sys/dev/
Both boxes and fiber NICs work fine under Solaris 9 using Syskonnect's
proprietary skge driver and a short cross-over fiber patch.
So it is definitely not an issue with with the hardware setup, but with OpenBSD.
I'll have the fiber NICs for another 10 days before I'll deploy them
in a customer's
Hi,
> On 1/30/07, Siegbert Marschall <[EMAIL PROTECTED]> wrote:
>
> Or, are you saying that the Marvell PHY 88112 does not really care
> about if T, SX or LX is set, because for the optical "GBIC"
> electrically all is the same?
yupp, from the signal point of view in the moment you have optics
it'
Hi Mark
Most likely something is not quite right with the eephy(4) driver.
eephy_status() in sys/dev/mii/eephy.c seems to be a candidate for
closer examination. It appears to fall through the if() clause and
does the else part, although we have a NIC with MIIF_IS_1000X :
Hi Rolf,
Most likely something is not quite right with the eephy(4) driver.
The 88E1112 PHY apparently supports both copper and fiber, and I think
it should automatically switch over to fiber, but apparently it
doesn't. Could you test some diffs for me on that machine?
Mark
* Rolf Sommerhalder <[EMAIL PROTECTED]> [2007-01-30 21:48]:
> Two identically configured SUN V210, each equipped with a SK-9S91 PCI
> NIC (single port, single mode fiber 1 Gbit/s), run -current snapshot
> dated 20 Jan 07
> The kernel detects those fiber NICs, besides the four on-board bge,
> see dm
On 1/30/07, Siegbert Marschall <[EMAIL PROTECTED]> wrote:
try media 1000baseT mediaopt full-duplex , 1G fiberlinks should be
always fullduplex, rest ist not relevant since it's purely a hardware-
question. wonder how the thing got it's head on 100BaseTX...
apart from that it's a good idea to te
Hi,
> # ifconfig -m msk0
> msk0: flags=8843 mtu 1500
> lladdr 00:00:5a:72:fc:58
> media: Ethernet autoselect (100baseTX half-duplex)
> status: no carrier
> supported media:
> media none
> media 10baseT
> media 10baseT
Hello misc,
Two identically configured SUN V210, each equipped with a SK-9S91 PCI
NIC (single port, single mode fiber 1 Gbit/s), run -current snapshot
dated 20 Jan 07
The kernel detects those fiber NICs, besides the four on-board bge,
see dmesg below. After boot, the msk0 come up in autoselect me
10 matches
Mail list logo
