Re: bioctl Device Support

2005-11-23 Thread Gaby vanhegan
On 23 Nov 2005, at 20:34, Otto Moerbeek wrote: > Don't know how you upgraded, but one thing that might be wrong is de > bio dev entry: > > [EMAIL PROTECTED]:35]$ ls -l /dev/bio* > crw--- 1 root wheel 79, 0 Jul 7 20:34 /dev/bio > [EMAIL PROTECTED]:36]$ I followed all the instructions in

Re: bioctl Device Support

2005-11-23 Thread Marco Peereboom
Ah ok so this is a PERC 2/SC. There is a bug in the driver or firmware which causes the firmware to hang whenever there is access to more than 1 LD at the same time. To prevent hangs I marked these cards as broken to prevent access to more than 1 LD, unfortunately the broken flag also *ha

Re: bioctl Device Support

2005-11-23 Thread Otto Moerbeek
On Wed, 23 Nov 2005, Gaby vanhegan wrote: > On 23 Nov 2005, at 20:10, Gaby vanhegan wrote: > > > I figured that it would be supported: > > > > # bioctl ami0 > > bioctl: BIOCINQ: Operation not supported by device > > # bioctl -Dv ami0 > > bioctl: cookie = 0xd0f51e90 > > bio_inq > > bioctl: BIOCINQ

Re: bioctl Device Support

2005-11-23 Thread Marco Peereboom
Otto is right. This looks like a PERC 3/SC. Since the passthrough works everything else should work too. The firmware looks a little old so you might want to upgrade that as well. Send a "bioctl ami0" please. On Nov 23, 2005, at 2:00 PM, Otto Moerbeek wrote: On Wed, 23 Nov 2005, Gaby va

Re: bioctl Device Support

2005-11-23 Thread Gaby vanhegan
On 23 Nov 2005, at 20:10, Gaby vanhegan wrote: > I figured that it would be supported: > > # bioctl ami0 > bioctl: BIOCINQ: Operation not supported by device > # bioctl -Dv ami0 > bioctl: cookie = 0xd0f51e90 > bio_inq > bioctl: BIOCINQ: Operation not supported by device > > Apparently not :( Here

Re: bioctl Device Support

2005-11-23 Thread Gaby vanhegan
On 23 Nov 2005, at 20:00, Otto Moerbeek wrote: >> ami0 at pci1 dev 14 function 1 "Intel 80960RP ATU" rev 0x02: irq 14 >> Dell 467/32b >> ami0: FW 1.06, BIOS v1p00, 128MB RAM >> ami0: 2 channels, 16 targets, 1 logical drives >> scsibus0 at ami0: 1 targets >> sd0 at scsibus0 targ 0 lun 0: SCSI2 0/d

Re: bioctl Device Support

2005-11-23 Thread Otto Moerbeek
On Wed, 23 Nov 2005, Gaby vanhegan wrote: > HI, > > I've just upgraded to 3.8, hoping that ami/bioctl would support my > RAID card, which it doesn't: > > ami0 at pci1 dev 14 function 1 "Intel 80960RP ATU" rev 0x02: irq 14 > Dell 467/32b > ami0: FW 1.06, BIOS v1p00, 128MB RAM > ami0: 2 channe