I have disabled motherboard BCM5720 and plugged the external.
i have understand the problem.
If I have two BCM5720 the server freeze. If you have only one no
problem. The only remaining problem is bge1 stay in active mode (on each
card) and don't pass in distribute mode
--
Best regards,
Loïc B
Hi all,
i have plugged a serial cable on the server and started a tty on it.
In fact my server has com0 and com1 port but it seems com1 is the real
console port. I have also set ddb.console=1 to sysctl.conf but when i
send break or ctrl+alt+escape in the console terminal nothing happen.
I am connec
Ok, i have another new to this problem.
I have unplugged the external BCM5720 card, and now there is only the
motherboard BCM5720 + the Intel Pro 1000.
I created two LACP trunks with 2 ports (1 for each card).
The servers doesn't freeze anymore !! (but there is a problem,
motherboard bge1 stay act
No it's a dell r320 Then a 64bit cpu then amd64 architecture :)
Loic Blot
Le 8 mai 2013 à 23:54, Joerg Goltermann a écrit :
> Hi,
>
> On 04.05.2013 20:11, Loïc Blot wrote:
>> Today, i want to upgrade exactly same model (Dell R320 with PCI Intel
>> CARD and BCM5720 on motherbroad plus PCI BCM57
Hi,
On 04.05.2013 20:11, Loïc Blot wrote:
Today, i want to upgrade exactly same model (Dell R320 with PCI Intel
CARD and BCM5720 on motherbroad plus PCI BCM5720), and i have some very
problematic issues. OpenBSD upgrade works like a charm, but when i use
LACP with broadcom cards, after a moment,
On 2013-05-07, Loïc BLOT wrote:
> Hello Stuart, ok for the console, (i would tell i use keyboard and
> screen on the server directly, sorry for the mistake :s).
> I can't test this week, because of production (and then i have shutted
> down the server because he interfers with the CARP master and
Hello Stuart, ok for the console, (i would tell i use keyboard and
screen on the server directly, sorry for the mistake :s).
I can't test this week, because of production (and then i have shutted
down the server because he interfers with the CARP master and take the
hand whereas he mustn't...)
Can
On 2013-05-06, Loïc BLOT wrote:
> Hello,
> I use the same stack:
> Carp on vlan on trunk on physical,
> There is no backtrace its a complète server freeze (im on a serial), i would
> prefer a ddb but there isn't
Can you get into ddb if you send BREAK over serial?
You will need to reboot with dd
A little more precision,
my server have network, but some times he looses also network for 1
second and CARP goes to master on this backup servers and generate
instability. I think there is a problem somewhere, but i don't know why.
To compare, i have two Dell R320 with BCM5720 and EM, on works per
Hello,
I use the same stack:
Carp on vlan on trunk on physical,
There is no backtrace its a complète server freeze (im on a serial), i would
prefer a ddb but there isn't
Loic Blot
Le 6 mai 2013 à 06:59, David Gwynne a écrit :
> do you have a real serial console hooked up to the machines? more
do you have a real serial console hooked up to the machines? more specifically,
can you break into ddb when the machine breaks and get a trace?
i use carp on vlans on lacp trunks on top of myx(4) and em(4) "quite a lot"
without trouble, so its likely to be bge(4) if you ask me. unfortunately tha
11 matches
Mail list logo
