Simen Stavdal(sstav...@gmail.com) on 2019.01.14 22:57:19 +0100:
> Hello Sebastian,
>
> So, I am on amd64, 6.4 :
>
> OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>
>
> The purpose of my setup, is to play ar
Hello Sebastian,
So, I am on amd64, 6.4 :
OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
The purpose of my setup, is to play around with redistribution between
OSPF and BGP and vice versa.
I found an aging ar
Forgot to mention
the reason you cant ping router C from A without specifying the
src address is because, when your router pings another device,
it will by default use the ip of the interface that has the active
route in the FIB... (usually the interface closest to the other router)
if your src a
Siemen,
im not certain I understand why you are applying route labels.
also im not certain about your aims for your network design...
If you want good documentation on best practices... the cisco
case studies /juniper white papers or talks at nanog / ripe meetings
are a good place to start...
Hi,
Simen Stavdal(sstav...@gmail.com) on 2019.01.14 21:29:43 +0100:
> Hello,
>
> I have three routers connected in a chain.
> A<->B<->C
>
> All routers have a host address as loopback 100 (192.168.5.x/32, A=1, B=2,
> C=3).
> The segments between the routers are 192.168.1.0/30 (AB) and 192.168.2
Hello,
I have three routers connected in a chain.
A<->B<->C
All routers have a host address as loopback 100 (192.168.5.x/32, A=1, B=2,
C=3).
The segments between the routers are 192.168.1.0/30 (AB) and 192.168.2.0/30
(BC).
A to B runs OSPF
B to C runs IBGP
I redistribute the BGP routes into OS
6 matches
Mail list logo
