On Mon, 29 Jun 2020 14:53:52 -0700
Mike Larkin wrote:
> On Mon, Jun 29, 2020 at 08:25:19PM +, Martin wrote:
> > Setting up Debian as vmm guest is not a trivial procedure and
> > require Debian Linux host with KVM installed first to install your
> > guest with screen connected.
>
> Why do yo
About a year ago I set Debian by difficult way from official distribution
without modifying official iso and preconfigured console output.
As Mike wrote, it is significantly better to find iso with virtio driver.
Martin
‐‐‐ Original Message ‐‐‐
On Monday, June 29, 2020 9:53 PM, Mike Lar
Dave,
Alpine 3.12 works excellent with your kernel drivers. Absolutely amazing!
I've just built all of them and solve ton of time without experimenting with
tsc kernel options.
virtio_vmmci
virtio_pci_obsd
vmm_clock
I followed all of your recommendations except adding tsc options to
/etc/upda
Thanks, found mistake. Works like a charm!
‐‐‐ Original Message ‐‐‐
On Monday, June 29, 2020 8:51 PM, Dave Voutila wrote:
> On Mon, Jun 29, 2020 at 4:46 PM Martin martin...@protonmail.com wrote:
>
> > According to man vmctl for both: -current and 6.7 -b should be used for
> > base image
According to man vmctl for both: -current and 6.7 -b should be used for base
images. -b works just before kernel+vmm+vmctl -current update.
Please check https://man.openbsd.org/vmctl.8
Can it be a bug?
Martin
‐‐‐ Original Message ‐‐‐
On Monday, June 29, 2020 8:28 PM, Dave Voutila wrot
Setting up Debian as vmm guest is not a trivial procedure and require Debian
Linux host with KVM installed first to install your guest with screen connected.
Once you have your host ready with KVM run a command to set iso up:
qemu-img create -f qcow2 linux.qcow2 128G
kvm -enable-kvm -vnc 127.0.
There is quite nice article how to prepare own headless ISO — for Debian it’s
quite the same …
https://giocher.com/words/2018/ubuntu-on-openbsd-vmm/
S pozdravem / Kind regards
Martin Sukaný
UNIX Engineer, Developer, DevOps specialist
xmpp: mar...@sukany.cz
phone: +420 776 275 713
email: mar...@
Dave,
After build kernel+vmd+vmctl sources from -current I have an issue with
installing a system from *.iso images.
The command below works fine before update, but not now
$ doas vmctl start -m 1G -c -n vmlan -b /home/iso/install67.iso -d
/home/vmm/guest.qcow2 guest
Martin
‐‐‐ Original M
On Mon, Jun 29, 2020 at 08:25:19PM +, Martin wrote:
> Setting up Debian as vmm guest is not a trivial procedure and require Debian
> Linux host with KVM installed first to install your guest with screen
> connected.
>
Why do you believe this? Setting up debian in vmm is not any harder than s
On 2020-06-29 12:54 p.m., Martin wrote:
George, thanks for your feedback!
I'd prefer OpenBSD in 99% of situations, but now I need to roll out Docker.
Docker = linux. So I have to solve all the major issues, especially with clock,
and run it for a project using OpenBSD host of course.
Work
Alpine has minimalist console ready install on ~40Mb *.iso initially if you
chose -virt release. Can be installed out of the box for headless environment.
With some additional env. binaries and configs + docker it grow up to 780Mb in
*.qcow2 image. I suppose it will be a bit higher after additio
George, thanks for your feedback!
I'd prefer OpenBSD in 99% of situations, but now I need to roll out Docker.
Docker = linux. So I have to solve all the major issues, especially with clock,
and run it for a project using OpenBSD host of course.
I set vmd Debian desktop guest a year ago with 5.2
On Mon, Jun 29, 2020 at 4:46 PM Martin wrote:
>
> According to man vmctl for both: -current and 6.7 -b should be used for base
> images. -b works just before kernel+vmm+vmctl -current update.
Re-read it. You're mixing the `vmctl start` and `vmctl create`
commands. They reuse options but the -b o
On Mon, Jun 29, 2020 at 4:05 PM Martin wrote:
> After build kernel+vmd+vmctl sources from -current I have an issue with
> installing a system from *.iso images.
> The command below works fine before update, but not now
>
> $ doas vmctl start -m 1G -c -n vmlan -b /home/iso/install67.iso -d
> /hom
Hi Dave,
Alpine kernel 5.4.43-1-virt guest openbsd 6.7 stable host. Try to compile vmd
from -current to improve linux guests stability.
set clocksource=tsc in /etc/update-extlinux.conf
run update-extlinux to install boot loader.
Next boot getting this in dmesg:
...
[Frimware Bug]: TSC doesn't
Hi George,
did you solved the issue? I remember that I faces similar thing when I
installed headless ubuntu as a guest … My issue was related to the fact that I
used ‚boot cdrom‘ directive inside my configuration (seems that there is a bit
inconsistency between the man page and the real configu
On 2020-06-29 8:51 a.m., Martin Sukany wrote:
Hi George,
did you solved the issue? I remember that I faces similar thing when I
installed headless ubuntu as a guest … My issue was related to the fact that I
used ‚boot cdrom‘ directive inside my configuration (seems that there is a bit
incon
Hi list,
I'm using Alpine-virt linux (headless linux with 40Mb initial *.iso size) which
has tsc issues. Alpine uses syslinux lightweight boot loader by default. In
order to enable tsc I've added tsc=reliable tsc=noirqtime to
/etc/update-extlinux.conf before console=ttyS0,115200 and updated it
On Mon, Jun 29, 2020 at 10:57 AM Martin wrote:
>
> Hi Dave,
>
> Alpine kernel 5.4.43-1-virt guest openbsd 6.7 stable host. Try to compile vmd
> from -current to improve linux guests stability.
Are you also running a -current kernel? vmm(4) is in the OpenBSD
kernel...vmd(8) is in base.
>
> set c
On Mon, Jun 29, 2020 at 7:23 AM Martin wrote:
>
> Hi list,
>
> I'm using Alpine-virt linux (headless linux with 40Mb initial *.iso size)
> which has tsc issues. Alpine uses syslinux lightweight boot loader by
> default. In order to enable tsc I've added tsc=reliable tsc=noirqtime to
> /etc/upda
20 matches
Mail list logo
