Liam Farr wrote:
> The 'numbers' are in 1000s of bytes per second processed.
> type 16 bytes 64 bytes256 bytes 1024 bytes 8192 bytes
> aes-128-cbc193.60k 681.73k 2049.24k 6516.71k12357.51k
> aes-256-cbc188.07k 656.00k 2048.68k
ay, February 19, 2010, at 12:33PM, "Stuart Henderson"
wrote:
>On 2010-02-18, Liam Farr wrote:
>> I have a AMD Geode LX800 based system (PC Engines ALIX 2C3) and
>> am trying to use a HIFN 7955 (Soekris VPN1411) crypto card to improve
>> OpenSSL performance (for SFTP
On 2010-02-18, Liam Farr wrote:
> I have a AMD Geode LX800 based system (PC Engines ALIX 2C3) and
> am trying to use a HIFN 7955 (Soekris VPN1411) crypto card to improve
> OpenSSL performance (for SFTP and OpenVPN).
You could compare your current results with those after setti
of the CPU is
saturated and this permits for work offload, allowing the main system to
use CPU for other things.
Unfortunately, its often less expensive to buy more cores on production
servers than to put an $800 crypto card in.
But if you're doing lots of stuff on your AMD Geode appl
On 2/18/2010 7:21 AM, Liam Farr wrote:
Hi,
I thought that the system might be using the built in crypto in the AMD Geode CPU instead of the
HIFN and have used "config -e -o bsd.new /bsd" to disable glxsb (glxsb0 at pci0 dev 1
function 2 "AMD Geode LX Crypto" rev 0x00: RN
On Fri, Feb 19, 2010 at 01:21:18AM +1300, Liam Farr wrote:
| I have a AMD Geode LX800 based system (PC Engines ALIX 2C3) and am trying
to
| use a HIFN 7955 (Soekris VPN1411) crypto card to improve OpenSSL
performance
| (for SFTP and OpenVPN).
|
| However after installing the HIFN card I don't
Hi,
I have a AMD Geode LX800 based system (PC Engines ALIX 2C3) and am trying to
use a HIFN 7955 (Soekris VPN1411) crypto card to improve OpenSSL performance
(for SFTP and OpenVPN).
However after installing the HIFN card I don't seem to get any performance
gain, and all the crypto still
Henning Brauer <[EMAIL PROTECTED]> writes:
> * Nicolas Legrand <[EMAIL PROTECTED]> [2008-03-18 07:56]:
>> Damien Miller <[EMAIL PROTECTED]> writes:
>> > On Mon, 17 Mar 2008, Dimitri wrote:
>> >> Hello all.
>> >> My cuestion is simply.
On Mon, Mar 17, 2008 at 11:38 PM, Dimitri <[EMAIL PROTECTED]> wrote:
> Hello all.
>
> My cuestion is simply.
>
> OpenBSD run over AMD Geode, specificly over Packard
> Bell S18P?.
If it's using the integrated LX800 graphics for its display, OpenBSD
will not run X
On 18/03/08 08:15 AM, Henning Brauer wrote:
* Nicolas Legrand <[EMAIL PROTECTED]> [2008-03-18 07:56]:
Damien Miller <[EMAIL PROTECTED]> writes:
On Mon, 17 Mar 2008, Dimitri wrote:
Hello all.
My cuestion is simply.
OpenBSD run over AMD Geode,
Yes.
specificly over Packard
Bell
On Tue, Mar 18, 2008 at 8:15 AM, Henning Brauer <[EMAIL PROTECTED]> wrote:
> so you are saying that the old cisco catalyst 1924 switches I have
> somewhere here (that an axe or some explosives and I will have fun with
> soonish) runs OpenBSD, since it has an 80486 processor? cool.
>
I think th
* Nicolas Legrand <[EMAIL PROTECTED]> [2008-03-18 07:56]:
> Damien Miller <[EMAIL PROTECTED]> writes:
> > On Mon, 17 Mar 2008, Dimitri wrote:
> >> Hello all.
> >> My cuestion is simply.
> >> OpenBSD run over AMD Geode,
> > Yes.
> >> s
Nicolas Legrand wrote:
> Damien Miller <[EMAIL PROTECTED]> writes:
>
>> On Mon, 17 Mar 2008, Dimitri wrote:
>>
>>> Hello all.
>>>
>>> My cuestion is simply.
>>>
>>> OpenBSD run over AMD Geode,
>>
>> Yes.
>>
Damien Miller <[EMAIL PROTECTED]> writes:
> On Mon, 17 Mar 2008, Dimitri wrote:
>
>> Hello all.
>>
>> My cuestion is simply.
>>
>> OpenBSD run over AMD Geode,
>
> Yes.
>
>> specificly over Packard
>> Bell S18P?.
I've read it's an AMD Geode LX800, so yes.
On Mon, 17 Mar 2008, Dimitri wrote:
> Hello all.
>
> My cuestion is simply.
>
> OpenBSD run over AMD Geode,
Yes.
> specificly over Packard
> Bell S18P?.
Don't know.
-d
Hello all.
My cuestion is simply.
OpenBSD run over AMD Geode, specificly over Packard
Bell S18P?.
thanks.
Dimitri.-
http://dimitri.homeunix.com/~dimitri/
OpenBSD - Free, Functional & Secure
unreadable and the resolution very low. It appears from the fit-PC
forums that the amd driver is needed. Has anyone had other success
with this machine, or previously ported this driver to OpenBSD? dmesg
below.
I have several AMD Geode LX devices that have Video. The video port
on these devices
U vendor 0x1022 product 0x2090
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
vga1 at p
13:14
> To: misc@openbsd.org
> Subject: AMD GEODE LX-800 just works with kernel from
> install42.iso and kernelpanics with powersave on.
>
> Hi Folks,
>
> I am running, or at least trying to run, OpenBSD 4.2 on a
> minipc using AMD's GEODE LX-800.
> (Its a
> http://www
On Wed, Dec 05, 2007 at 01:13:31PM +0100, Taisto Qvist XX wrote:
> Hi Folks,
>
> I am running, or at least trying to run, OpenBSD 4.2 on a minipc using
> AMD's GEODE LX-800.
> (Its a
> http://www.sdlsystem.se/shop/product_info.php?cPath=23_56&products_id=65
> 6 )
>
> At first I had almost given u
1022 product 0x2090
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
vga
Hi,
I am trying to get OpenBSD (up to -current) to run on a AMD Geode LX-800.
It seems that OpenBSD has problems to recognize the fpu and it panics with
"npxdna vector not initialized" upon the first "df" issued on the shell.
NetBSD works fine on this machine.
Any suggesti
Hi,
Anyone know whether AMD Geode LX-800 CPUs (CS-5536 chipset) are
supported? It is not listed on www.openbsd.org/i386.html
Thanks,
chakl
On Sat, May 13, 2006 at 10:04:29PM +0200, Wild Karl-Heinz wrote:
> hi.
>
> I'm working on a openbsd kernel and an image for
> an AMD Geode SC1200UHF-266.
>
> I got a cpu-module and the eval-board. The manufactor
> is kontor.
>
> I configured a kernel similar to
hi.
I'm working on a openbsd kernel and an image for
an AMD Geode SC1200UHF-266.
I got a cpu-module and the eval-board. The manufactor
is kontor.
I configured a kernel similar to my wrap-boxe
and changed some entries for the network and console.
The kernel will be loaded and after the lo
25 matches
Mail list logo
