On Sun, Nov 26, 2023 at 04:01:34PM +0800, Tito Mari Francis Esca?o wrote:
> Hi misc,
> I want to run OpenBSD on company issued M1 Mac through VMware Fusion 13,
> for experiments and development.
> I tried to use the ARM64 image but it does not seem to work, it's my first
> time to use non-X86 machi
On Sat, May 06, 2023 at 04:40:21PM -, Stuart Henderson wrote:
>
> [snip]
>
> wgport port-number wgkey my-private-key
> inet 10.0.98.1/24
>
> [snip]
Here's[*] a super hacky way to convert a pivpn wireguard config file to output
that can be placed in a /etc/hostname.wg0 file, if this helps any
ack screen (so write this to /etc/boot.conf after
install).
Kind regards + thanks,
Tor Houghton
On Wed, Jun 29, 2022 at 11:24:58AM -, Stuart Henderson wrote:
> > [snip]
> >
> > So after 5 minutes xidle starts xlock and 5 minutes after that my laptop
> > autosuspends. If I unlock the laptop before 5 minutes expire the sleep
> > gets killed and the laptop doesn't suspend.
>
>
> this is ne
clock gets brought forward.
Are there other (better!) ways of doing this?
Kind regards,
Tor Houghton
Hello,
What is the correct way to enable KARL when booting bsd.mp?
I have "set image /bsd.mp" in /etc/boot.conf but the console says
that reorder_kernel fails.
$ uname -mvr
6.6 GENERIC.MP#372 amd64
$ doas cat /usr/share/relink/kernel/GENERIC.MP/relink.log
(SHA256) /bsd: FAILED
Failed to verify
On Sun, Aug 25, 2019 at 10:02:47PM +0300, Mario Galindez wrote:
> hello,
>
> i have set my own app as the shell of a user on a remote host. My app
> reads from stdin, and prints output to stdout.
>
> If I do:
> ssh u...@remotehost.com
>
> and manually type multiple lines of text,the app works a
On Fri, Aug 16, 2019 at 02:12:28PM +0200, Pierre Emeriaud wrote:
> x
>
> Le ven. 16 août 2019 à 12:34, Tor Houghton a écrit :
> >
> > Is there a way to get this information without using 'strings' and 'grep'?
>
> $ doas what /bsd
> /bsd
>
Hello,
My /bsd contains the following:
OpenBSD 6.5 (GENERIC) #2: Tue Jul 23 23:21:38 CEST 2019
I _think_ this means that the kernel has been built/relinked twice, with the
date when this was done. (Please do correct me if I am wrong.)
Is there a way to get this information without using 'strin
On Fri, Jul 12, 2019 at 12:11:55PM -, Stuart Henderson wrote:
>
> I don't think you have updated your packages.
>
You're right of course. :-#
Thanks!
Tor
Hello,
When I try to run rrdtool, I get the followiing error:
$ rrdtool
ld.so: rrdtool: can't load library 'libpthread-stubs.so.2.0'
Killed
This, I suppose, has been happening since I upgraded from 6.2, but didn't
catch as it's something I run at home.
Anyone got any hints as t
Hi,
Difficult to make any recommendations based on this information, but once
you've recovered, enforce ssh key-based logins only.
Given that your client might be compromised, you probably want to look into
that as well.
To limit the possibilities that someone gets access to your
ssh private ke
On Wed, Mar 14, 2018 at 05:56:19PM +0100, Tor Houghton wrote:
> On Tue, Mar 13, 2018 at 11:23:12PM -0700, Peter van Oord v/d Vlies wrote:
> > Hello Martijn,
> >
> > Did you ever found an solution ?
> > I have the same at a customer system.
> >
>
> I'
On Tue, Mar 13, 2018 at 11:23:12PM -0700, Peter van Oord v/d Vlies wrote:
> Hello Martijn,
>
> Did you ever found an solution ?
> I have the same at a customer system.
>
I'd like to chip in with a "me too" here. It's "suddenly" started happening
to my apu2c2 device.
I say "suddenly" because it
Hi,
I've noticed that my 6.2 install on my apu2c2 doesn't want to start cron
on boot.
Where would I look to troubleshoot this?
$ doas grep -i cron /etc/rc.conf*
/etc/rc.conf:cron_flags=
(I am able start cron manually.)
Tor
On Wed, Jun 29, 2016 at 07:10:27AM +, Stuart Henderson wrote:
>
> symlinking won't work well with unbound, you'll need to copy and edit
> to specify filenames/paths to unbound-checkconf and, if applicable,
> unbound-anchor.
>
Thanks for this heads up (and thanks to Jiri for pointing out the
Hello,
I'm looking for the best/easiest way to run unbound on different interfaces
but with different configuration files (well, what I actually want is to
specify different forward-addr: configurations for each interface).
I also would like to control the unbound daemon(s?) using rcctl.
Should
On Wed, Apr 06, 2016 at 11:27:11AM -0700, Mike Larkin wrote:
>
> Someone else recently reported this same issue was fixed by a bios upgrade.
>
> I'd start there first.
>
Thanks!
A BIOS update did the tricki (dmesg attached).
Tor
OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
On Wed, Apr 06, 2016 at 11:27:11AM -0700, Mike Larkin wrote:
>
> Someone else recently reported this same issue was fixed by a bios upgrade.
>
> I'd start there first.
>
Aha. Yes, the dmesg tells me it's from 2011. Ok; thanks for the tip.
Tor
Hello,
5.9 installed just fine, but I am wondering if there are any means of
controlling the fan (detected as hw.sensors.acpithinkpad0.fan0) - it seems
to be spinning at ~4000rpm, even when X isn't running and the CPU is idle.
I've apmd running, and thought perhaps "apm -A" might do the trick. Ap
On Mon, Apr 04, 2016 at 08:08:19AM +0100, Jason McIntyre wrote:
>
> it is a bit inconsistent, yes.
>
> it is very much less readable with a line break. you could remove the
> offset, but that doesn;t look great either. you could specify a smaller
> offset and juggle the actual text a bit.
>
> th
On Fri, Apr 01, 2016 at 02:47:42PM -0700, Philip Guenther wrote:
[snip]
> Sooo close. To quote doas.conf(5):
>
[snip]
> 'args' is *literal* there, so the correct config line would be
> permit nopass support as root cmd /usr/sbin/rcctl args restart ntpd
>
Hahaha, holy fballs! *donk* (I
Hi,
Now that sudo is out of base, I am wondering -- do I need to add it again,
or does doas.conf allow for specifying commands with arguments?
Obviously not like this (doas doesn't like that), but akin to:
permit nopass support as root cmd /usr/sbin/rcctl restart ntpd
I don't want the
On Tue, Mar 29, 2016 at 08:18:34AM -0400, Nick Holland wrote:
>
> * TI Silent 700 ("home oriented" printing terminal. At the time, in the
> US, it was illegal to attach non-telephone company equipment to the
> telephone company's phone lines...)
!!
I fondly remember playing Adventure on one of
On Sat, Jul 25, 2015 at 02:01:09PM +, Stuart Henderson wrote:
>
> When you "pkg_add dovecot", it says "Look in /usr/local/share/doc/pkg-readmes
> for extra documentation", and the dovecot file in there explains that you need
> to do just this.
>
It probably did. I was adding a bunch of packa
Hi,
It appears that the dovecot package won't start at boot time unless the
ulimit is raised for open files:
..
Jul 25 13:39:53 duck dovecot: master: Error:
open(/var/dovecot/login-master-notifyda2290c6851a9f03) failed: Too many open
files
..
If I add the following to /etc/login.conf --
dovec
On Wed, Jul 15, 2015 at 11:40:31PM +0930, Jack Burton wrote:
> >
> > Post it to tech@ .
>
> Done. See post to tech@ titled "httpd: patch to close TLS sockets that
> fail before TLS handshake".
>
Thanks; the fd's on my deployment (5.7-stable) have been stable since
application of this patch 12 h
On Mon, Jul 13, 2015 at 10:52:46PM +0930, Jack Burton wrote:
> >
> > I don't pretend to know httpd (at all), but I'm wondering, what should
> > fstat(1) say, over time, for the httpd processes?
>
> Thanks Tor -- that was exactly the clue I needed to isolate the
> problem.
>
> [snip]
>
> admin ta
On Sun, Jul 12, 2015 at 07:56:37PM +0930, Jack Burton wrote:
>
> It is possible I simply failed to provision sufficient capacity --
> which could easily be fixed by adding a login class for www with a
> higher limit on open fds -- but I fear that might just be hiding the
> problem rather than addr
On Wed, Jul 08, 2015 at 10:04:27PM -0500, Theodore Wynnychenko wrote:
>
> [snip]
>
> server https://server2.tldn.com, client 2067 (63 active), 10.0.28.254:60330 ->
> 10.0.28.130:443, buffer event error
> [..]
> server https://server2.tldn.com, client 2068 (63 active), 10.0.28.254:52350 ->
> 10.0.2
So,
I've been trying to use dup-to to duplicate udp traffic, but it's not going
to plan, and neither Google nor Hansteen's book appear to have any good
examples. Of course, there might be a reason for this: dup-to might not be
what I'm looking for, and I'm probably doing it wrong.
Initially I tho
Whatever you did to it, thumbs up. I no longer need to periodically check
to see if the interface has a dhcp address and bring it down, then up,
then request another address.
OpenBSD 5.6 (GENERIC) #174: Fri Aug 8 08:31:14 MDT 2014
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GE
On Sat, Jan 03, 2015 at 11:29:32PM +0100, Reyk Floeter wrote:
>
> - User directories are not explicitly supported and have to be
> within the chroot - somewhere in /var/www.
>
> - For example, you can currently create user directories the following way:
>
> # mkdir /var/www/users/~reyk
> # l
Hello,
I'm wondering if there is a plan to add support for ~user style URL
expansion to the new httpd.
I've tried fudging it for 'someuser' by adding the following to the default
server within /etc/httpd.conf, but to no avail:
location "/~someuser/*" {
root "/htdocs/user
On Sun, Nov 30, 2014 at 04:21:50PM -0500, Ted Unangst wrote:
> On Sun, Nov 30, 2014 at 15:37, thornton.rich...@gmail.com wrote:
> > Where do you store these passwords? On a napkin?
>
> Wherever you like. A shorter password with all the o's turned into 0's
> is hardly more secure.
>
I'd say "on a
On Mon, Oct 06, 2014 at 05:34:34PM -0700, Philip Guenther wrote:
>
> By itself, one of the ntpd daemons will keep open the stdin/out/err it
> was started with, which in this case will be the pipe or tty created
> by of the ssh server.
Aha. Thank you very much for the explanation.
>
> The easies
Hi,
Dumb question: I'm running 'sudo ntpd -s' as part of a remote command to an
OpenBSD guest[*]; unless I add a 'pkill sshd' to the end of the remote
command, e.g.
ssh guesthost 'sudo pkill -9 ntpd && sudo ntpd -s && date && pkill sshd'
the ssh connection won't disconnect. Why is this ('sudo
On Thu, Jan 23, 2014 at 09:29:38AM +, Florian Obser wrote:
> You want revision 1.30 of if_pflow.c
> export the original aka untranslated address in pflow
> ok florian@ henning@
> ~ http://www.openbsd.org/cgi-bin/cvsweb/src/sys/net/if_pflow.c#rev1.30
>
> (and by that I don't mean you sh
Hello,
I've been using pflow in a non-NAT environment (btw, thanks for both the pf
support and the "other" OS softflowd), but now I'd like to use it in a NAT
configuration.
Is there a particular way pflow needs to be configured to see which of the
NAT'ed hosts are talking to which external addre
On Mon, Dec 30, 2013 at 09:22:18PM -0500, Matt Carlson wrote:
> Yasuoka,
>
> I tried that just now and it doesn't seem to make a difference.
>
> Thanks,
>
At risk of replying off-topic and out of date, I'll ask the question anyway.
Have you considered using OpenVPN, as there are working client
As I was not able to find information on this, I thought I'd post it here
for others.
While I was unable to boot from a USB stick, I did manage to boot the
machine from a USB CD/DVD drive using the rear USB ports.
Please note that I have not used the system "in anger" (though I plan to,
later in
On Fri, May 10, 2013 at 08:11:06AM +, Stuart Henderson wrote:
>
> I don't think so (and I haven't been able to persuade it to with
> route-to/dup-to either).
>
> The classic example for this is DHCP, which uses a userland process
> to relay it across.
>
Yeah, I was remeniscing(sp?) about Ne
On Fri, May 10, 2013 at 02:35:02AM +0300, Artturi Alm wrote:
>
> Hi,
>
> Just in case you did not even try google, here's the first hit for
> "forwarding multicast traffic openbsd":
> http://undeadly.org/cgi?action=article&sid=20110222002946
> The article ought to give enough clues.
>
No, I did
I'm running 5.2, and I am wondering if it's possible to forward broadcast
requests between interfaces.
I've got a Squeezebox that doesn't seem to like that the media server is on
a different segment than itself.
Both the media server and the Squeezebox itself send out what to be "are you
there" p
On Sat, May 04, 2013 at 01:23:06AM +1000, John Tate wrote:
> I have a squid proxy listening in transparent mode on another faster
> system, but I can't seem to get packets there with pf. I tried simply
> modifying the other divert-to rule to use the IP address of that system. It
> doesn't seem to w
If you don't have too many flows (seeing as you are using it for the home
network), you could install Splunk* with the "Netflow for Splunk"
application (which uses nfcapd/nfdump) instead of using nfsen. This allows
you to correlate flows with other type of interesting log information as
well as all
Hello,
I found and repurposed an old PowerBook6,4 yesterday. Thanks all who worked
on the macppc port.
The onboard BCM4306 appears to be working just fine after running fw_update
too.
I have a question regarding the onboard temperature sensors; they are
currently reading:
hw.sensors.adt0.temp0=
Someone mentioned buying a cheap thin client on eBay; while you're at it,
buy a cheap switch that supports Ethernet trunking -- that way you can
cheaply extend your thin client's Ethernet port count (I used a Zyxel 2108 a
while back).
While we're on shoestring infrastructure and budgets, I mean.
On Thu, Jul 12, 2012 at 08:27:34PM +, Christian Weisgerber wrote:
> Tor Houghton wrote:
>
> > I'm successfully dishing out IPv6 connectivity to iPads and Androids,
> > but the Macs on the network refuse to acknowledge that the OpenBSD 5.1
> > system can provide I
On Thu, Jul 12, 2012 at 03:02:55PM -0400, Simon Perreault wrote:
> On 07/12/2012 02:41 PM, Tor Houghton wrote:
> >On Thu, Jul 12, 2012 at 12:32:52PM -0500, Mark Felder wrote:
> >>That's odd... I swear my wife's macbook has had functional IPv6 for
> >>quite a w
On Thu, Jul 12, 2012 at 12:32:52PM -0500, Mark Felder wrote:
> That's odd... I swear my wife's macbook has had functional IPv6 for
> quite a while... unless the recent Lion update nuked it and I didn't
> notice?
>
> Please report your findings -- I'd love to fix this at home if it's broken.
>
I'
List,
I'm successfully dishing out IPv6 connectivity to iPads and Androids,
but the Macs on the network refuse to acknowledge that the OpenBSD 5.1
system can provide IPv6 routing for it. Seems Apple have decided that rtsol
is not the way to go:
$ sudo rtsold en1
rtsold: kernel is
I'll start the week by giving thanks to you who write the documentation for
OpenBSD.
Thank you.
And here's another donation.
Kind regards,
Tor
nowait root/usr/sbin/popa3d popa3d
in my case, i only listen on localhost (connections to this daemon gets
forwarded by stunnel or ssh).
kind regards,
tor houghton
On Thu, Nov 11, 2010 at 05:32:27PM +0900, Ryan McBride wrote:
> On Wed, Nov 10, 2010 at 01:45:16PM +0100, Tor Houghton wrote:
> > May I ask whether or not "per user" ownership (or permission to update) a
> > table is/will be possible?
> >
> > I am ponderi
Hello,
May I ask whether or not "per user" ownership (or permission to update) a
table is/will be possible?
I am pondering the best mechanism for a non-root process to add/remove
addresses to a table.
Kind regards,
Tor
On Wed, Oct 27, 2010 at 07:34:15PM -0600, Theo de Raadt wrote:
>
> shit which comes out of research organizations all tends to suck these
> days, doesn't it. or perhaps it always did (OSI networking, ipv6,
> same same).
>
You forgot the lovely stuff that comes out of commercial partnerships! Th
Just wanted to say, 6to4 was a doddle, thanks for the effort in making
it so effortless.
Tor
List,
If one wanted to increase the size of an existing device configured with
vnconfig, I presume that one could use disklabel and growfs on this
partition. To do so, however, one would need to increase the size of the
file which vnconfig uses as the device (I presume).
What is the best way of i
On Mon, Jul 06, 2009 at 04:15:51AM +, Miod Vallat wrote:
> This whole thread is actually one more proof that nobody ever reads the
> installation notes (INSTALL.*).
>
> Miod
Oooh, you've just identified a space-saving measure!
*ducks*
On Tue, Mar 31, 2009 at 05:00:34PM +0200, Alexander Bochmann wrote:
>
> Absolutely. From my point of view, Wim's constant presence
> and marketing activity was an important factor in the past
> success of the project, and he is to be commended for that.
>
Correct me if I've misunderstood previ
> On 09:41, Sat 03 Jan 09, Daniel A. Ramaley wrote:
>
> Running OpenBSD under VirtualBox is not stable at all.
> I have good experience running OpenBSD under xen, kvm and vmware-server.
FWIW, my experience with OpenBSD and VirtualBox has so far been more than
I could hope for. I had to migrate to
> o The umsm(4) driver now supports Option GlobeTrotter 3G+, Huawei E220
> and more HSDPA MSM devices.
Does this mean that also the Option Globetrotter GT Max "7.2 Ready" is
supported (aka Option GX0201)? (I received the 4.4 box a week or so ago, but
have not had a chance to try.)
Tor
Hello,
This card is not on the list of supported hardware, but I was wondering if
anyone has tried this card at all or is anyone working on a driver for it?
Looking at some Linux forums it appears that this card somehow acts as a
storage device (so that Windows can get drivers from it) as well as
Hello,
The supported hardware page for Alpha says that "most devices" for pci(4)
are supported.
Does this mean that it will support a PCI SATA card with, e.g. a SiL3512
chipset?
Alternatively (if no), is there a way of getting SATA disks into an
Alphaserver 800?
Tor
On Thu, Feb 21, 2008 at 11:22:54PM -0300, Giancarlo Razzolini wrote:
> [snip]
> be done, i also saw those kind of display "dumps" with some video cards
> [snip]
it's called "burn-in".
*ducks*
/t
On Mon, Nov 19, 2007 at 07:59:17AM -0800, David Newman wrote:
> > Well, if you want to prevent someone from accidentally connecting to your
> > network, yes.
>
> WEP keys can be captured is less than one minute:
>
This fact is immaterial in context of my statement.
Tor
On Sun, Nov 18, 2007 at 10:51:49PM -0700, Clint Pachl wrote:
> >
> >OpenBSD supports WEP.
> >
>
> Does it even matter?
>
Well, if you want to prevent someone from accidentally connecting to your
network, yes.
Tor
It's in the Hydra documentation, but the link there isn't quite correct
anymore I think.
http://0xbadc0de.be/wiki/libssh:libssh0.11
On Tue, Oct 30, 2007 at 08:52:59PM +1100, Chris wrote:
> I installed hydra (4.1/i386) from the package list and tried:
>
> hydra -l user -p password localho
On Wed, Oct 17, 2007 at 02:16:15AM +1000, Sunnz wrote:
> Ohh thanks for the tip.
>
> So does sendmail supports smtp over ssl? When I restart sendmail I got
> something like:
>
> 554 5.3.5 /etc/mail/localhost.cf: line 239: service "smtps" unknown
>
> And in that line I've got:
>
> # SMTP client
In case there are those of you who (still) run 3.6;
http://www.bogus.net/~torh/files/017_openssl.openbsd_3_6.patch
etc.
Hi,
I'm trying to troubleshoot NAT on a VLAN interface (parent interface is xl0
- a 3com 905). With OpenBSD 3.4 I got a 'initialized with non-standard mtu
1496' message with the same interface card, but with 4.1 this disappeared.
Does this mean "everything is fine, this card supports VLAN trunks"
On Thu, Apr 26, 2007 at 03:33:47AM +, Douglas Maus wrote:
> Is it possible for users (non-root) to mount NFS exports?
> I seem to be able to mount_nfs using sudo, but not as a regular user.
> I actually want to allow regular users to mount the NFS share from
> another machine/OS (MacOSX), but s
On Mon, Mar 19, 2007 at 03:59:06PM +0100, Karel Kulhavy wrote:
>
> I have also a feeling that deleting huge files or large directories with
> loads of tiny files in subdirectories is slower.
>
I have a different feeling.
/t
--
"Tell me about your mother."
On Fri, Mar 16, 2007 at 09:54:16AM +0100, Karel Kulhavy wrote:
>
> Is it possible to fix OpenBSD 4.0 system without compiling anything, by e. g.
> somehow rewriting the file that contains the kernel? I have never compiled
> OpenBSD, ports etc. and don't have time to study all the theory around Ope
Here's a quick one for 3.6 thru 3.8 for those of us who are still holding on
to stale goods and old baggage.
http://www.bogus.net/~torh/files/uipc_mbuf2.c.openbsd_3_6.patch
Obviously, we should all upgrade. Ahem.
Tor
On Mon, Dec 04, 2006 at 06:56:15AM -0500, Nick Holland wrote:
> Patrick Cummings wrote:
> ...
> > While I perfectly understand that you said you had a problem with Mailman
> > that uses too much CPU time, you need to understand that normally the
> > hardware is built to allow you to use the CPU at
Hi,
I've got an issue with a machine that runs hot once [a Mailman Python
process] appears to go into a tight loop and consumes 99% of the CPU for a
longer amount of time.
Output from sensorsd shows the temperature over a 15 minute period:
Nov 11 21:44:02 2006 | temp,25.00 | temp,67.00 | temp,
I am running
OpenBSD 3.9-current (GENERIC) #1017: Mon Jul 24 19:57:12 MDT 2006
on one machine, but I have deleted the source tree for that release (that
is, 3.9-current snapshot around July 20-24). I currently see 4.0 snapshots
(perhaps there are 3.9-current snapshots somewhere but I hav
Hi,
I have two IP addresses assigned to the external interface. I also have two
"internal" interfaces. Is it possible to NAT each internal interface to a
specific external IP address (without specifying the external address, but
the interface "description")?
I am using 3.8; and in my mind I thoug
On Tue, May 16, 2006 at 08:23:33AM +1000, David Gwynne wrote:
> what driver is behind these sensor values?
>
> can you post a full dmesg and sysctl hw.sensors when everything is
> running ok?
>
See, that's the thing. I am not sure it is running OK, because I only appear
to get sensors.13 (FAN)
try fstat(1) - you won't need to install anything then.
On Mon, May 15, 2006 at 10:21:26PM +0200, RedShift wrote:
> Can you show us the output of lsof?
>
> Peter Philipp wrote:
> >Hi,
> >
> >I have an ibook that has a broken ata controller and thus I boot and run
> >the OS
> >off an USB stick.
List,
This may sound daft, but the man pages don't appear to mention it. I have a
box that sometime gives me a warning about fan RPM failure (or rather, the
RPM is low, so sensorsd logs that it is outside the limits).
Thing is, sysctl doesn't show me a readout. E.g.
bash-3.00# sysctl hw.sensors.
On Thu, Apr 13, 2006 at 02:26:26PM -0400, K WESTERBACK wrote:
>
> As I recall there's only one bpf available during
> install. So if you had configured the other interface
> with dhcp, you would have exactly this problem.
>
Ah; I believe xl0 was the interface configured first, if I recall correc
Hi,
This is informational only; aue0 is able to get DHCP after halt+reboot.
During install, it was not possible to assign "dhcp" to aue0 (USB ethernet
adapter) - I would get the message
Can't find free bpf: no such file or directory
Just wondered what the normal cause for this is (it c
On Wed, Apr 05, 2006 at 12:11:49PM +0200, Henning Brauer wrote:
>
> actually, we are.
> for quite some stuff.
>
the install for one. i love the install. 8-)
tor
On Tue, Mar 07, 2006 at 11:44:50AM -0700, Theo de Raadt wrote:
>
> Some BIOS do not clear the memory, meaning the dmesg stays alive in
> memory, and can get slightly corrupted especially if it wraps. As
> well, OpenBSD avoids clearing the dmesg buffer if it appears sound,
> because that allows de
Hi,
I did a checkout of 3.8 today (I installed from CD, so figured a source
update would be good), did config GENERIC, make clean && make depend &&
make, installed it, and now I have an odd beginning to the dmesg.boot:
$ head /var/run/dmesg.boot
" 686-class) 3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR
IP Freedom by Ridgeway Systems also use OpenBSD. Although not a firewall, it
is usually used in conjuction _with_ a firewall, for enabling conferencing
products to work, even if the firewall does not support the protocols.
http://www.ridgewaysystems.com/products_ipf_faqs.aspx
Ok, slightly off top
On Fri, Jun 10, 2005 at 10:13:13AM -0400, Rick Barter wrote:
>
> [snip]
>
> You know what? This is the number one problem with the world today;
> people like you trying to protect the young, innocent, whatever from
> themselves and others. Since when is it *MY* job to police everyone
> else's
90 matches
Mail list logo
