On Wed, Jun 5, 2019, at 08:07, Frank Groeneveld wrote:
> After updating to Firefox 67.0 on Fedora 30 it seems some OpenBSD
> servers cannot be reached over HTTPS anymore. The error produced is
> SSL_ERROR_DECODE_ERROR_ALERT. I get this with some of my own servers,
> but als
After updating to Firefox 67.0 on Fedora 30 it seems some OpenBSD servers
cannot be reached over HTTPS anymore. The error produced is
SSL_ERROR_DECODE_ERROR_ALERT. I get this with some of my own servers, but also
with https://cvsweb.openbsd.org/
Anybody know what is going on? Chromium and openss
Hello Oleg,
Yes, I've hosted it for a few years on OpenBSD. It's a tough beast to get
working though, because of all the dependencies and separate copmonents. If
you're familiar with Ruby you can probably get it working, if not then I
wouldn't advise you to try.
I've contributed a number of pa
On Wed, Aug 15, 2018, at 15:02, Stuart Henderson wrote:
> Thanks for the suggestion, currently OpenBSD and UEFI only.
> I'll give it a try with MBR when I can afford a better SSD and rebuild it
> on that.
>
I need CSM mode enabled on my X260 to get it working correctly. Is it disabled
for you?
On Fri, Jul 13, 2018, at 16:51, Frank Groeneveld wrote:
> After sending the email I noticed the first line in the Xorg log
> (machdep.aperture=1) and that also doesn't seem to fix the software
> rendering.
Anybody have an idea?
Thanks in advance.
Frank
After sending the email I noticed the first line in the Xorg log
(machdep.aperture=1) and that also doesn't seem to fix the software rendering.
Frank
Dear all,
I'm trying to get OpenBSD 6.3 with Gnome working on an Intel NUC based on Intel
Kaby Lake. I found that the amd64 webpage at https://www.openbsd.org/amd64.html
states there is support for Intel Kaby Lake. Does that mean it should not
fallback to software rendering? Because on this mac
On Tue, Oct 10, 2017, at 10:22, leo_...@volny.cz wrote:
> Instead of sd0b? Then it appears fine.
Yes, that was my point, everything seemed fine until I found that line
in dmesg.
> >> You might want to keep sd0b around as a dump partition though, just in
> >> case it ever panics before going mult
On Tue, Oct 10, 2017, at 09:48, leo_...@volny.cz wrote:
> It'd seem more wrong to me if it'd try to swap to a nonexistent
> partition ;) Just in case, what is the output of 'swapctl -l' straight
> after boot, preferably when still single-user?
swapctl -l always lists /dev/sd1b correctly.
> You m
I recently switched the swap partition on a server from sd0b to sd1b.
I've modified /etc/fstab accordingly and after a reboot swapctl -l lists
it as being the only used swap partition correctly. Today I noticed this
line in dmesg:
root on sd0a (4340b9bfa4cdde0a.a) swap on sd0b dump on sd0b
It stil
On Thu, May 18, 2017, at 09:01, Alfred Morgan wrote:
> How difficult would it be to get the Wacom Graphire (it says ET-0405-U on
> the bottom of my tablet) to work with the uwacom driver which claims to
> only support the CTL-490?
The uwacom driver was written for newer tables which have a broken
On Thu, May 18, 2017, at 14:42, Pau wrote:
> Is anybody using a thinkpad x270? If so, could you please send me your
> dmesg? Is it working fine?
I have an x260 and it works fine when using the efifb driver, except for
suspend/resume.
> More importantly: Is the laptop resuming X/connection after s
On Wed, Apr 12, 2017, at 08:16, Peter J. Philipp wrote:
> I'm interested in buying an Wacom Intuos Draw which is supported in
> 6.1. However when I go to reichelt.de the model that's available says
> CTL-490DW I don't know if DW is supported, can someone let me know?
>
> https://www.reichelt.de/G
On Tue, Mar 21, 2017, at 16:56, Marko Cupać wrote:
> ...
>
> What exactly I should pass on enc interface so that the above packet
> passes?
>
> Thank you in advance.
Hi,
You probably need to allow ipencap protocol packets. I also need l2tp
packets, but that depends on whether you use it.
--
Fran
On Sun, Nov 20, 2016 at 03:21:32PM +0100, Martin Pieuchot wrote:
> On 20/11/16(Sun) 13:58, Frank Groeneveld wrote:
> > A few week back there was an outage at my ISP. Afterwards, I kept
> > getting crashed on igmpproxy after changing channels on the tv a few
> > times:
>
A few week back there was an outage at my ISP. Afterwards, I kept
getting crashed on igmpproxy after changing channels on the tv a few
times:
-
Note: RECV Leave message from 192.168.1.2 to 224.0.0.2 (ip_hl
24, data 8)
Debu: Got leave mes
On Sat, Oct 29, 2016 at 10:14:00AM +0800, Zhang Huangbin wrote:
> You must create the root dn (dc=example,dc=com) first. For example:
>
> dn: dc=example,dc=com
> objectclass: dcObject
> objectclass: organization
> dc: example
> o: example
>
>
> Zhang Huangbin, founder of iRedMail project: ht
I'm trying to get ldapd working on 6.0-stable. Using the man page and
/etc/examples/ldapd.conf I've created the following configuration file:
schema "/etc/ldap/core.schema"
schema "/etc/ldap/inetorgperson.schema"
schema "/etc/ldap/nis.schema"
listen on lo0 secure
namespace "d
On Thu, Aug 18, 2016 at 09:09:38PM +0200, Thuban wrote:
> Hello,
> I was trying to build php7.0 with ports, but it fails (see configure
> failure below).
>
> I'm running on 5.9 with stable patches (for both ports and src of
> course).
>
> It seems that configure doesn't recognise the "--with-apxs
On Mon, Jul 18, 2016 at 09:54:02AM +0200, Philip Guenther wrote:
>
> The privilege separation code in xenocara has a compiled in list of
> devices that are permitted to be opened; of the uhid devices it only
> currently includes /dev/uhid0 through /dev/uhid3. You can either
> a) update the list a
On Sun, Jul 17, 2016 at 08:53:50PM +0200, Frank Groeneveld wrote:
> [46.602] (EE) xf86OpenSerial: Cannot open device /dev/uhid6
> Operation not permitted.
> [46.602] (EE) Error opening /dev/uhid6: Operation not permitted
Forgot to mention: I had changed the file permi
I'm trying to get my new Wacom tablet working with X11 in -current.
It's a Wacom Intuos Pen (CTL-490) and it shows up in dmesg like this:
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Wacom Co.,Ltd.
Intuos PS" rev 2.00/1.00 addr 5
uhidev0: iclass 3/0, 192 report ids
uhid0 at uhidev0 reporti
Does it help to disable acpivideo in the kernel? I need to do this on my
UEFI Asus laptop to get it working.
Frank
On 06/16/16 20:52, j...@openmailbox.org wrote:
Does this workaround work for you?
http://marc.info/?l=openbsd-misc&m=146520183827302&w=2
http://marc.info/?l=openbsd-misc&m=146523
On 11/28/15 12:47, Loïc BLOT wrote:
As i see OpenBSD's dhclient have the user-class (option 77) but i also
need vendor-class-identifier (named as is in isc-dhcp-client) &
authentication (option 90,https://www.ietf.org/rfc/rfc3118.txt). I
didn't found those options.
I use option 60 (vendor-class
On Sat, Nov 15, 2014 at 02:30:26PM +0100, Frank Groeneveld wrote:
> I might be able to find out what change caused this regression if
> somebody can hint where to look. I've already crawled through most of
> the intel drm code, but I think this must be somewhere in the ACPI
> laye
An improved version of the patch: mark path as optional for "deliver to
maildir path".
On Tue, Nov 18, 2014 at 08:53:51PM +0100, Frank Groeneveld wrote:
> This little patch changes the tag argument to correctly display it as a
> command
> argument to the tagged keyword.
>
This little patch changes the tag argument to correctly display it as a command
argument to the tagged keyword.
Frank
--- /usr/src/usr.sbin/smtpd/smtpd.conf.5Wed Jul 9 14:44:54 2014
+++ smtpd.conf.5Tue Nov 18 20:30:12 2014
@@ -87,7 +87,7 @@
.It Xo
.Ic tagged
.Op Ic \&!
-.Ic tag
Hi,
On my Asus Zenbook UX31A I used to be able to control the backlight in
both X and on the console using wsconsctl display.brithness=xx. After
upgrading to 5.6 this stopped working. Whatever I put in place of xx,
the output reports:
display.brightness -> 100.00%
I've attached dmesg output below.
Hi Mark,
On Wed, Mar 05, 2014 at 12:06:06AM +0100, Mark Kettenis wrote:
> That's the intention. The idea is that if firmware is needed, but not
> present, radeondrm(4) will detach and vga(4) will attach.
> Unfortunately the codepaths are different for different hardware
> generations and not all
First of all: props to all the people who are working to make 5.5 one of
the best releases! It's amazing to boot into Gnome 3.10 with Radeon KMS
with machdep.allowaperture=0 :)
Back to my "problem": I've installed my desktop machine (dmesg attached)
twice from different snapshots. The newest snaps
30 matches
Mail list logo
