On Mon, Jul 28, 2025, 02:38 Claudio Jeker wrote:
> On Sun, Jul 27, 2025 at 11:51:25PM +0200, Omar Polo wrote:
> > Florian Obser wrote:
> > > RFC 4291 2.1:
> > >All interfaces are required to have at least one Link-Local unicast
> > >address
> >
> > thanks for the pointer! Now my questio
My understanding is that the host doesn't have an routable connection from
rdomain 0 to rdomain 1. wg1 and lo1 are specific to that rdomain, and sshd
is 'attached' to rdomain 0.
For the VM to interact directly with the host, you would have to add pair
interfaces (see ifconfig man page) to route tr
On Thu Feb 27, 2025 at 4:35 PM CST, alpha beta wrote:
> Hello, I have a single homed VM and I'm trying to isolate a wireguard
> interface inside a dedicated rdomain. All my peers except this host
> are behind NAT, and this VM has a static IP. I would like to use it
> to connect the several LANs beh
On Thu Nov 21, 2024 at 1:19 PM CST, Dan wrote:
>
> Hello,
>
> I'm trying to test in my dev environment the first implementation
> of a web app that should run based on the result of some shell scripts
> started by crontab.
>
> Problem arising immediately is that I'm not able to get crontab running
On Tue Oct 22, 2024 at 6:46 PM CDT, nisp1953 wrote:
> On Tue, Oct 22, 2024 at 5:38 PM Geoff Steckel wrote:
>>
>> Pretty much any program can access its current working directory.
>>
> If you try and share your desktop through Jitsi, pledge will shutdown
> your web browser.
this is... not quite co
This hasn't necessarily been explained very simply up to this point, so I'll
give it a go.
You are not going to be attempting to rebuild the filesystem or in any way make
it functional.
This is a key point to understand; the filesystem is done. Permanently broken.
This is also the reason people k
A word of warning: even multiple overwrites are not guaranteed to erase any kind
of flash-based storage. This applies even to some spinning rust now that have
intermediate flash storage caches on them (although those tend to be
enterprise-level devices).
SSD/NVME's made by a reputable manufacturer
The E8400 processor doesn't support extended page tables, which vmm
requires. AFAIK, all modern hypervisors require this.
restore from backup. scan_ffs doesn't find ffs2 filesystems.
On 5/31/23 05:03, Valdrin MUJA wrote:
> Hi Claudio & David,
>
> Wireguard can work behind NAT. In that case maybe the solution is
wireguard + BGP.
I've been using OSPF over wireguard for several years now. It works
quite well. You just have to add `wgaip 224.0.0.0/8' to allow multicast
over
I've been running wg since it was introduced into the kernel without any issues.
local pf.conf:
...
pass in on wg0 from (wg0:network) to any
match out on wg0 from any to any nat-to (wg0)
...
pass out modulate state
remote pf.conf:
...
pass in on wg0
pass out on wg0
match out on vio0 nat-to (vio0)
I'm sorry the filter didn't work for you. I'm not using OpenBSD as a
desktop right now, but I abused my router a bit to test, and can confirm
that with an HL-L2370DW, the following printcap entry works, along with
the filter. I know you've basically already moved on, but if you feel like
giving it
I use an HL-L2370DW which only accepts PCL on BINARY_P1.
I think it likely that yours acts the same. You'll have to tell lp to send
the output through a filter, using (iirc) the vf= option in printcap.
This is what i used for a filter:
#!/bin/sh
gs -sPAPERSIZE=letter -sDEVICE=pxlmono -sOutputFile=
I've been running a Hewlett-Packard HP t620 Quad Core TC for a couple of
years now in that role, with the AMD GX-415GA SOC in it. It's the bigger
brother of that found in the APU systems.
The stock configuration usually has 4GB of RAM in them, with a single re(4)
1GBps NIC, and a 16GB mSATA SSD.
AFAIK, OpenBSD doesn't support .11ac or .11ax at all, with only a very
limited number of cards supporting Host AP mode. The only .11n ones I found
being athn(4), bwfm(4), and ral(4). The (few) others that support Host AP
mode only do so in .11g or .11b. In the future, I would take a look through
se
It isn't just SIP. You will need to set up NAT traversal and make sure RTP
traffic can pass as well. Setting up a STUN server and configuring the
clients to use it should aid in the NAT portion. The RTP traffic should be
fine as long as pf is being stateful. If the phones register over SIP fine,
bu
Second on adding an alias. I had no idea it was deprecated, and have never
used -R at all... It never occurred to me to read the man page for cp.
-- Byron Grobe
On Thu, Jan 2, 2020, 11:57 AM Ingo Schwarze wrote:
> Hi Marc,
>
> Marc Espie wrote on Thu, Jan 02, 2020 at 11:30:35AM +0100:
>
> > And
17 matches
Mail list logo
