No idea what you perceive here as a "rant", my apologies if that seemed
like one to you, that's not my intention.
FWIW both ftplist1.openbsd.org and ftplist2.openbsd.org have no
entry, either.
I don't see what I need to prove here. That's 3 hosts already that don't
have an DNS record, s
On Sun, Oct 22, 2023 at 6:53 PM Armin Jenewein wrote:
> Hi.
>
> On 23-10-22 15:47:45, Kastus Shchuka wrote:
> > On Sun, Oct 22, 2023 at 10:29:08PM +0200, Armin Jenewein wrote:
> > > Hi,
> > >
> > > as I'm almost 100% sure adding IPv6 connectivity to the openbsd.org
> > > host
> > > wouldn't intro
On 23/10/23 11:51, Armin Jenewein wrote:
Why do you need it?
>
Because it's extremely inconvenient to have manually type in the name of
a mirror that I know has an entry. The installer won't even be able
to download the mirror list because of the reason I mentioned. It tries
to talk to ope
Ah, sorry for my misreading what you wrote.
Please use 'sendbug' to report the sequence of pkg_add operations that
didn't work.
Philip Guenther
On Sun, Oct 22, 2023 at 5:50 PM Mark wrote:
> It wasn't an upgraded system, that's fresh install, a completely new
> OpenBSD 7.4 amd64.
>
> And the
Hi.
On 23-10-22 15:47:45, Kastus Shchuka wrote:
> On Sun, Oct 22, 2023 at 10:29:08PM +0200, Armin Jenewein wrote:
> > Hi,
> >
> > as I'm almost 100% sure adding IPv6 connectivity to the openbsd.org
> > host
> > wouldn't introduce side-effects for IPv4 users: is there any reason
> > openbsd.org sti
It wasn't an upgraded system, that's fresh install, a completely new
OpenBSD 7.4 amd64.
And the first package I wanted to install, was imagick. And it failed as on
the screenshot image link.
However, installing the "gtk-update-icon-cache" package, and after, pkg_add
imagick solved the problem.
T
I would start by removing X from the picture and verify that suspend and
resume are working (or not) when X is not running. Are USB devices failing
to reattach or coming back in some weird mode which isn't working? Can you
ssh in?
If that's working fine, then bring X back into the picture but ca
Don't know what's wrong with the pkg database (/var/db/pkg/) on your
system, but on mine the shared-mime-info-2.2 package includes a definition
for the update-mime-info tag, so if yours lacks that then something in
there got hosed during your upgrade. Could be data loss from disk failure,
could be
On Sun, Oct 22, 2023 at 10:29:08PM +0200, Armin Jenewein wrote:
> Hi,
>
> as I'm almost 100% sure adding IPv6 connectivity to the openbsd.org host
> wouldn't introduce side-effects for IPv4 users: is there any reason
> openbsd.org still has no entry at the end of 2023?
Why do you need it?
>
Tried changing the installurl, an another mirror, but didn't help.
Here's what actually happens;
https://i.ibb.co/G0wbGf5/terminal-sshot.png
Regards.
Mark , 23 Eki 2023 Pzt, 01:16 tarihinde şunu
yazdı:
> pkg_add ImageMagick-6.9.12.88p0 gives me;
>
> (after fetching few libraries)
>
> "Can't in
pkg_add ImageMagick-6.9.12.88p0 gives me;
(after fetching few libraries)
"Can't install ImageMagick-6.9.12.88p0: can't resolve
djvulibre-3.5.28p1,libheif-1.16.2p0"
and then;
"Couldn't install ImageMagick-6.9.12.88p0 djvulibre-3.5.28p1
libheif-1.16.2p0."
This is a fresh OpenBSD 7.4 amd64 release
are you certain that you upgraded your userland packages after upgrading?
wireguard-tools is critical to update in 7.4 (I think due in part to the
wgdescr field being added, which is a sorely missing field imo)
(for what its worth, I ran into the same problem, specifically because I’d
typo’d pk
If this had been observed _during_ 7.4 development then it would have been
simpler to isolate what set of changes caused it. Since that didn't happen
you'll have to debug this yourself on the affected systems. For starters,
I would suggest turning up ssh logging with the -v option and capturing
t
On Sat, Oct 21, 2023 at 2:27 AM wrote:
> Hi Philip,
>
> Thank you very much for your answer.
>
> I tried to disable all options (+devices) possible. Same issue.
> And what's about disable acpi in the kernel using the bsd.re-config?
>
As Mike and Theo noted, this will certainly cause problems.
Hi,
as I'm almost 100% sure adding IPv6 connectivity to the openbsd.org host
wouldn't introduce side-effects for IPv4 users: is there any reason
openbsd.org still has no entry at the end of 2023?
This has likely be discussed in the past and OpenBSD does a good job for
me on both servers and
On Sun, Oct 22, 2023 at 05:56:28PM +0200, Pierre Peyronnel wrote:
> Hi there,
>
> Since upgrading from 7.3 to 7.4 my wireguard setup stopped working.
> Now, it might be me. Still here's what I have.
>
> Stripping down wg0.conf, I have this message as soon as I add a [Peer]
> section and its publi
Hello Judah,
> Silly question perhaps but are you trying to run this with the Allowed
> IPs commented out as shown in your example?
> If you remove the '#' from the front of that line does it work?
It does not hurt to ask.
The comment doesn't change a thing. With or without it you get that error
> Actually I can't be sure this the origin of your problem, but the
> value of "memory_limit" is wrong.
Thank you, I increased php memory limit but the problem persists
unfortunately.
In fact this 3000M file upload freezes our 16G machine even
when there is no other workload, so that's a signifi
I have no clue about you Dell configuration nor the chipset.
However, I can say you my historic mini-pc (among others) has a chipset
as well with shared memory *features*. It runs properly under any
version of OpenBSD. The only time I experienced these "freees" moments
is when I tried to overclo
Hello Pierre,
Silly question perhaps but are you trying to run this with the Allowed
IPs commented out as shown in your example?
If you remove the '#' from the front of that line does it work? I can
confirm that wireguard is working just fine for me after the update to
7.4 on multiple device
The symptoms of the freeze are similar to those described by i915kms users, but
the C400 laptop (1.2GH Pentium-M, 768M RAM) has the i830M built-in graphics.
This freeze also happens with NetBSD, FreeBSD, and several Linuxes. It works,
however, with OpenBSD 4.8 & 4.9.
The commonality of current
Hi there,
Since upgrading from 7.3 to 7.4 my wireguard setup stopped working.
Now, it might be me. Still here's what I have.
Stripping down wg0.conf, I have this message as soon as I add a [Peer]
section and its public key:
bsd# cat /etc/wireguard/wg0.conf
>
> [Interface]
> PrivateKey = (hidden
Let me joke that we clealry hope in 7.5 to slow down things further.
-- Daniele Bonini
On Thu, 19 Oct 2023 17:23:47 +
Roger Marsh wrote:
> Hi,
>
> After upgrade from 7.3 to 7.4 (on both boxes) the xterm session for this
> entry in .fvwmrc (on monitor):
>
> 'Exec exec ssh -Y opendev xterm -title roger@opendev'
>
> takes several seconds to deliver the xterm window, while I di
On 2023-10-21, Theo Buehler wrote:
> On Sat, Oct 21, 2023 at 09:23:51AM +0300, Mark wrote:
>> So, no idea on this?
>
> No. OCSP does work for me on 7.4 when enabled, both with httpd and nginx.
> With nginx, you need to have accessed the page at least once so it
> fetches and caches the staple and
25 matches
Mail list logo
