‐‐‐ Original Message ‐‐‐
On Wednesday, January 16, 2019 11:48 PM, Mike Larkin
wrote:
> Looks like your /usr/share/relink/kernel/GENERIC.MP/*.o files got trashed
> somehow? Or perhaps you ran out of space?
So in the GENERIC directory there are 1311 *.o files, exactly the same amount
as
Hello,
When I plug in my USB mouse after starting xenodm it does not seem to
be recognized by X: it cannot move the cursor and there is no output in
xev, while the builtin touchpad functions normally. It is recognized by
the kernel, though; the following is printed to dmesg when I unplug and
repla
Just to add more on this, something that makes no sense to me and that I
do not understand.
Just adding to what's below a simple additional flow as this
gateway$ doas echo 'flow from 66.63.44.90 to 66.63.44.100 type bypass' |
ipsecctl -vf -
even if there isn't anything at 66.63.44.100, will make
On Wed, Jan 16, 2019 at 03:04:49PM +, mabi wrote:
> Hello,
>
> While rebooting on a freshly new installed OpenBSD 6.4 VM (using VMM on an
> OpenBSD 6.4 server) I noticed that the kernel does not get relinked:
>
> reorder_kernel: kernel relinking failed; see
> /usr/share/relink/kernel/GENERI
> You don't actually even need an ipsec.conf file, you could just do
>
> $ echo 'flow from 192.0.2.1/32 to 192.0.2.2/32 type bypass' | doas ipsecctl
> -vf -
That would actually be a very simple solution and I would sure love it!
But testing doesn't show that as being the case. packets are still
On 2019-01-16, sven falempin wrote:
> On Thu, Jan 10, 2019 at 5:13 AM Stuart Henderson wrote:
>>
>> On 2019-01-10, Daniel Ouellet wrote:
>> > I have two separate subnets (on different interfaces) on a router. I am
>> > trying to tunnel both subnets over the internet to another router on my
>> >
On 2019-01-16, Daniel Ouellet wrote:
>> Maybe you misunderstood - I am just talking about a couple of lines in
>> ipsec.conf to setup the bypass flow, but still use iked for the
>> actual vpn connection.
>
> That's fair. May be I miss understood you, I thought that you
> recommended to actually sw
> Can someone point out an example of this gif+ipsec setup somewhere ?
>
> I failed at finding any GIF ref when looking IPSEC+OPENBSD, also man
> ipsec does not list gif, only enc.
This is dated obviously and for full disclosure I didn't try it, so look
at it as such.
https://undeadly.org/cgi?ac
> Maybe you misunderstood - I am just talking about a couple of lines in
> ipsec.conf to setup the bypass flow, but still use iked for the
> actual vpn connection.
I should have added that may not be the best idea but I was/am trying
rdomain for this, (having the bypass in rdomain 1 as an idea) no
On Tue, Jan 15, 2019 at 09:47:52PM +, Étienne wrote:
> On 06/01/2019 16:38, Juan Francisco Cantero Hurtado wrote:
> >
> > Use their default OpenBSD install. They have a special config on the
> > host for OpenBSD and the clock drifting problem.
> >
> Can you tell us more? Do you mean they chan
On Wed, Jan 16, 2019 at 12:57:30PM -0800, Misc User wrote:
> On 1/16/2019 12:44 PM, Leonid Bobrov wrote:
> > X server crashes and I can't find its core file for debugging purposes.
> >
>
> #find / -name '*.core'
Before asking that question I did this check.
On 2019-01-16, Leonid Bobrov wrote:
> --QoubChxHWbb7Nqw2
> Content-Type: text/plain; charset="utf-8"
> Content-Disposition: inline
>
> X server crashes and I can't find its core file for debugging purposes.
See "How to get a core file out of the X server?" in /usr/xenocara/README
if you have a ch
On 1/16/2019 12:44 PM, Leonid Bobrov wrote:
X server crashes and I can't find its core file for debugging purposes.
#find / -name '*.core'
X server crashes and I can't find its core file for debugging purposes.
[20.105] (--) checkDevMem: using aperture driver /dev/xf86
[20.121] (--) Using wscons driver on /dev/ttyC4
[20.172]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[20.172] X Protocol Version 11, Revision 0
[
> Maybe you misunderstood - I am just talking about a couple of lines in
> ipsec.conf to setup the bypass flow, but still use iked for the
> actual vpn connection.
That's fair. May be I miss understood you, I thought that you
recommended to actually switch to use the ipsec one instead.
The setup
>
>
>
> Are you using the -b option to vmctl? That seems to have a problem on AMD
> CPUs.
>
> Try installing from install64.fs/.iso if that's the case.
>
>
You are right, booting form the install64.iso works better than from bsd.rd.
Thanks for the hint and your incredible work on vmd.
After using l
Hi!
> Wipe your build directory and try again. Most likely it has some
> cache files from a previous autoconf run (mincore recently moved to
> libc).
You were spot on: rm -rf /usr/xenocara/* fixed it.
Thank you!
- Jyri
Hello,
While rebooting on a freshly new installed OpenBSD 6.4 VM (using VMM on an
OpenBSD 6.4 server) I noticed that the kernel does not get relinked:
reorder_kernel: kernel relinking failed; see
/usr/share/relink/kernel/GENERIC/relink.log
The content of the /usr/share/relink/kernel/GENERIC/re
On Thu, Jan 10, 2019 at 5:13 AM Stuart Henderson wrote:
>
> On 2019-01-10, Daniel Ouellet wrote:
> > I have two separate subnets (on different interfaces) on a router. I am
> > trying to tunnel both subnets over the internet to another router on my
> > network. I can tunnel one subnet easily and
On 2019-01-16, Jyri Hovila [Turvamies.fi] wrote:
> Hi!
>
> Anybody else having this issue with compiling CURRENT Xenocara?
>
>
> /usr/xenocara/lib/mesa/src/egl/main/eglglobals.c:166:8: error: implicit decla
> ration of
As I said, I haven't tried anything yet as I don't want to break a working
system, and I don't have a good way to test this in parallel right now.
The manpage says "The local delivery methods support additional options: [...]
virtual" without specifying which delivery methods are "local". My a
It would be helpful if you show what you have tried.
Should be as simple as:
action "relay-01" lmtp /var/run/lmtp.sock virtual
match from src action "relay-01"
Edgar
On Jan 16, 2019 7:37 AM, Adam Thompson wrote:
>
> [Cross-posting here before I give up and switch to Postfix -Adam]
>
>
> I h
[Cross-posting here before I give up and switch to Postfix -Adam]
I have an old instance that uses smtpd's virtual to rewrite *sender*
addresses.
Reading the 6.4-STABLE version of the smtpd.conf(5) manpage, I can't see how to
accomplish my goal any more - it looks impossible.
I don't want t
Hi!
Anybody else having this issue with compiling CURRENT Xenocara?
/usr/xenocara/lib/mesa/src/egl/main/eglglobals.c:166:8: error: implicit decla
ration of function 'mincore' is invalid in C99 [-Werror,-Wimplicit-fun
On 2019-01-10, Daniel Ouellet wrote:
>> OpenBSD's implementation of ipsec doesn't use the routing table, if you
>> want that (unless you make code changes) you will need to use a
>> different tunnel interface (gif or others) and just use ipsec to protect
>> the gif traffic.
>
> The point is to kee
unregister
I updated my -current version today, and found that the skeletal 3D
animation
runs very fine. Of course, any other models run fine, too.
Thank you developpers to update drm drivers of amdgpu!
It still has sometime to freeze the move (yes, about 30 seconds) when I
do something like stop the motio
27 matches
Mail list logo
