On Wed, Sep 12, 2018 at 11:01:13PM -0600, Austin Hook wrote:
> Have run my own mail server for maybe 20 years of OpenBSD, and apart from
> getting my ISP to give me a static IP and a correct reverse DNS entry, and
> a couple of run ins with a few filters that dumb ISPs run, it's worked
> fine al
I don't write many CD's these days but wanted to put some mp3's on a CDR
to play in my truck, since it plays a CD with *.mp3 files just as well as
WAV files on an regular audio CD, and, of course has room for a lot more.
Going back to the FAQ on multimedia... What I noticed, was that after
On Sun, 9 Sep 2018, Thomas Bohl wrote:
> > But the second (far more important) point I want to make is please *THINK
> > TWICE* if "running your own mail server" is something you are planning to
> > do on your home internet connection.
>
> For all intents and purposes, sending emails from a pri
On Wed, Sep 12, 2018 at 10:26:40PM -0500, Mike Coddington wrote:
> I've got IPv6 set up and things work great if I also use IPv4. DNS
> lookups go over IPv4 according to what I have in /etc/resolv.conf and
> records are followed. However, if I decide to go with just IPv6 by
> simplifying my /e
I've got IPv6 set up and things work great if I also use IPv4. DNS
lookups go over IPv4 according to what I have in /etc/resolv.conf and
records are followed. However, if I decide to go with just IPv6 by
simplifying my /etc/hostname.if file and using "inet6 autoconf" by
itself, I cannot do any
On Wed, 12 Sep 2018 14:03:17 +0200
Solene Rapenne wrote:
| > | Brett Mahar wrote:
| >
| > | > I recently updated my amd-64-current machine to the Sept 7th snapshot
(previous snapshot was July 17th).
| > | >
| > | > Prior to update both firefox and iridium browsers were able to be run
using
On Wednesday, 12 September 2018 20:49, Stuart Henderson
wrote:
> On 2018-09-11, Tim Jones b631093f-779b-4d67-9ffe-5f6d5b1d3...@protonmail.ch
> wrote:
>
> > I've had a quick look through the man pages and am still a bit unclear,
> > perhaps I'm just overthinking this ?
> > Let's say I've got
On 2018-09-11, Tim Jones
wrote:
> I've had a quick look through the man pages and am still a bit unclear,
> perhaps I'm just overthinking this ?
>
> Let's say I've got two perimeter "firewalls" running OpenBSD, talking BGP to
> upstream routers.
>
> On the "LAN" side I'm thinking about CARP, wh
On 2018-09-12, Tim Jones
wrote:
>
>> sounds like a nexthop validation issue. What does`bgpctl show nexthop` gives
>> you? Do you have a route to them?
>
> It gives this :
>
> Flags: * = nexthop valid
>
> Nexthop Route Prio Gateway Iface
> 10.250.250.250
>
>
> But
> sounds like a nexthop validation issue. What does`bgpctl show nexthop` gives
> you? Do you have a route to them?
It gives this :
Flags: * = nexthop valid
Nexthop Route Prio Gateway Iface
10.250.250.250
But surely I have a route if I can ping ? (As part of
Le mer. 12 sept. 2018 à 19:09, Tim Jones
a écrit :
>
> 2/ The BGP sessions come up
>
> 3/ "bgpctl sho ri" shows all routes. But none of them have any flags, not
> even the *=valid flag.
>
> 4/ Setting "nexthop qualify via default" gets the valid & select flags, but
> doing a traceroute sees the
I'm probably missing something silly, here's what I've got so far:
1/ Working VPN, I can ping between the BGP loopbacks on both sides
ping -S 192.168.1.1 10.250.250.250
ping -S 10.250.250.250 192.168.1.1
2/ The BGP sessions come up
3/ "bgpctl sho ri" shows all routes. But none of them have any
On 2018-09-11, Andrew Lemin wrote:
> Hi list,
>
> I use an OpenVPN based internet access service (like NordVPN, AirVPN etc).
>
> The issue with these public VPN services, is the VPN servers are always
> congested. The most I’ll get is maybe 10Mbits through one server.
>
> Local connection is a fe
On 2018-09-12, Hajime Edakawa wrote:
> Hello to all,
>
> I am sorry to say that I could not understand this behavior intuitively.
>
> $ id -Gn
> hajime wheel
> $ cat /etc/doas.conf
> permit nopass hajime as root cmd mg# A
> permit keepenv :wheel # B
> $ doas mg /etc/doas.conf
On 09-12 08:20, Brett Mahar wrote:
> I know `ssh -X` is more secure, I use this when I can but use the `ssh -Y`
> version when I need ability to copy and paste.
While this probably doesn't solve your main problem, it might be useful
afterward. For what it's worth, I have used ssh -X extensively
Hello to all,
I am sorry to say that I could not understand this behavior intuitively.
$ id -Gn
hajime wheel
$ cat /etc/doas.conf
permit nopass hajime as root cmd mg# A
permit keepenv :wheel # B
$ doas mg /etc/doas.conf # no password, ok.
...
$
But,
$ id -Gn
h
Is it possible to get this hosted on GitLab or GiHub for collaboration to
improve the script? I have used, and like, sipcalc but options are always good.
If you are using Python 3.6 or newer you may consider using f-strings as well
for better readability when substituting variables into strings.
Brett Mahar wrote:
> On Wed, 12 Sep 2018 08:13:27 +0200
> Solene Rapenne wrote:
>
> | Brett Mahar wrote:
>
> | > I recently updated my amd-64-current machine to the Sept 7th snapshot
> (previous snapshot was July 17th).
> | >
> | > Prior to update both firefox and iridium browsers were able
On 12 September 2018 at 16:13, Solene Rapenne wrote:
[...]
> I think you are supposed to use ssh -XY when using a remote X11 app.
Nope, both -X and -Y enable ForwardX11, but -Y also enables
ForwardX11Trusted. Unfortunately I don't see anything in the OpenSSH
7.7->7.8 changelog (https://www.opens
> Without digging them up I did a quick google on openbsd issues vultr.
> It pulled some things I saw before with 6.2 and timing, as well as
> issues with the base image, and other ones talking about a setting in
> KVM that was causing issues on certain servers.
I use Vultr, happily, but I _can_ c
Op Sat, 08 Sep 2018 17:36:07 +0200 schreef Ken M :
On Sat, Sep 08, 2018 at 11:32:00AM -0400, Jay Hart wrote:
I've run my own email server for 15 years now I think. I stick with
Linux for email server,
OpenBSD for routing/firewall. I personally find this is the best of
both worlds...
Just my
Hi Peter,
On Tue, 11 Sep 2018 16:12:48 +0200 Peter J. Philipp wrote:
>
> If I'm correct, in order to pull the zones to disk on a slave nsd
> setup, one has to manually or crontab "nsd-control write
> example.com". Is this correct?
Sort of;- a slave NSD instance would XFER the zones from it's mas
On Wed, 12 Sep 2018 08:13:27 +0200
Solene Rapenne wrote:
| Brett Mahar wrote:
| > I recently updated my amd-64-current machine to the Sept 7th snapshot
(previous snapshot was July 17th).
| >
| > Prior to update both firefox and iridium browsers were able to be run using
'ssh -Y' as another u
Hi Andreas,
Thanks for your reply. Sorry I should have been more clear.
I know that rdomains are the correct method with overlapping addressing.
The challenge is that I cannot figure out how to get openvpn to initialise it’s
resulting tunX interface directly into the correct rdomain?
You norma
On Tue, Sep 11, 2018 at 11:59:04AM -0600, Andrew wrote:
>
> FWIW: a small network calculator without a python dependency is already
> in packages.
>
> $> pkg_info ipcalc
> Information for inst:ipcalc-1.4p0
>
> Comment:
> small network calculator
>
> Description: ipcalc is a small tool that oper
25 matches
Mail list logo
