Re: Strange WLAN issue with ral(4) in hostap mode

Todd T. Fries wrote: > There are power savings for 802.11 that OpenBSD does not support; this is > entirely independent from saving battery via cpu clocking and it is also > entirely independent from saving battery via adjusting the transmit power > of the radio. The power savings for 802.11 actua

Re: use 3 nics as hub / switch

I'm doing what you're describing with a couple 4-port NICs. I assign an IP to one of the interfaces so dhcpd can run on that, then bridge all the interfaces together. Works like a charm. Your config files would look something like - hostname.rl1: inet 192.168.1.1 255.255.255.0 192.168.1.255

Re: Intel D945GCLF2

On Fri, January 2, 2009 17:40, Chris Cohen wrote: > Has anyone installed openbsd on the Atom board "D945GCLF2"? If so could > you post a dmesg and does it run stable? > > -- > Thanks > Chris has anyone seen any atom dual core with two lan ? I'd like a pf router that would be low energy :) Alix i

Re: OpenBSD, GCC 4 and Objective C

"Ted Unangst" wrote: > Well, libc doesn't have any support for exceptions, but that's because > c doesn't have exceptions. (not the problem). Well, actually libc was the wrong term. I more meant all the libraries OpenBSD provides that are used by the GNU stuff like GCC ;). Don't know any better

Re: OpenBSD, GCC 4 and Objective C

On Fri, Jan 2, 2009 at 4:03 PM, Jonathan Schleifer wrote: > Now if you compile it with egcc -fexceptions test.m -lobjc (you need > GCC 4.x), it will just abort. It will do the same on any other OS if you > don't specify -fexception or didn't catch the exception anywhere. > However, it doesn't make

Re: Intel D945GCLF2

checkout http://kerneltrap.org/mailarchive/openbsd-misc/2008/9/30/3457064 > -Original Message- > From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf > Of Chris Cohen > Sent: Friday, January 02, 2009 12:41 PM > To: misc@openbsd.org > Subject: Intel D945GCLF2 > > Has anyo

Re: laptop choice

On Fri, Jan 2, 2009 at 1:30 PM, Lars Noodin wrote: > shr @dslextreme.com wrote: > > ... The only drawback is that it doesn't have a built-in serial port. ... > > What is a reasonable work-around or solution for capturing the debugging > data that would otherwise be only available via serial consol

Re: AH+ESP and IPv6

37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A >http://todd.fries.net/pgp.txt > > Penned by Felipe Alfaro Solana on 20090102 20:29.56, we have: > | On Fri, Jan 2, 2009 at 7:52 PM, Todd T. Fries wrote: > | > | > The other answer is, ESP provides AH, therefore A

Re: Strange WLAN issue with ral(4) in hostap mode

There are power savings for 802.11 that OpenBSD does not support; this is entirely independent from saving battery via cpu clocking and it is also entirely independent from saving battery via adjusting the transmit power of the radio. The power savings for 802.11 actually put the radio to sleep fo

Re: Strange WLAN issue with ral(4) in hostap mode

Jussi - thanks for the response, but I've tried that to no effect, e.g. on the Macbook Pro the Energy Saver settings for Mains and Battery modes are identical. On Fri, 2 Jan 2009 05:45:45 +0200, Jussi Peltola wrote: > Disable power saving on the clients.

Re: laptop choice

shr @dslextreme.com wrote: > ... The only drawback is that it doesn't have a built-in serial port. ... What is a reasonable work-around or solution for capturing the debugging data that would otherwise be only available via serial console? Regards, -Lars

Re: OpenBSD, GCC 4 and Objective C

Forgot to mention that this is on OpenBSD 4.4 on SPARC64. But I guess this isn't so important, as letting someone else test it on x86 had the same result. -- Jonathan [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]

OpenBSD, GCC 4 and Objective C

Hello! I'm currently writing on an Objective C framework and trying to port it to OpenBSD. However, whenever I throw an exception using @throw, abort() gets called. This is the usual behaviour if an exception isn't cought. However, when I put it into a @try {} @catch {} block, that doesn't change

Re: laptop choice

> I want to buy a laptop (second hand is my first choice). I want some > strong point on it, reliability - I want to use it for a long time > (excluding battery) so I don't need broken hdd, excessive heat, noise, > etc. > I don't need performance, I will use it only for some pdf read and > browsing

Intel D945GCLF2

Has anyone installed openbsd on the Atom board "D945GCLF2"? If so could you post a dmesg and does it run stable? -- Thanks Chris

Re: AH+ESP and IPv6

50797 (FWD) | \ \\ 37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A http://todd.fries.net/pgp.txt Penned by Felipe Alfaro Solana on 20090102 20:29.56, we have: | On Fri, Jan 2, 2009 at 7:52 PM, Todd T. Fries wrote: | | &

Re: AH+ESP and IPv6

software solutions." \ 250797 (FWD) > | \ > \\ > > 37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A >http://todd.fries.net/pgp.txt > > Penned by Felipe Alfaro Solana on 20

Re: AH+ESP and IPv6

50797 (FWD) | \ \\ 37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A http://todd.fries.net/pgp.txt Penned by Felipe Alfaro Solana on 20090102 17:38.51, we have: | On T

Re: Getting the Thinkpad X200 working fully under OpenBSD

Hi, quick follow up for the archives: Everything now works with -current. Thanks all! - Robert [1] A catch to get the X intel(4) working for me: The X200 reports two outputs/monitors that have to be disabled. (This might mess with the dockingstation, but i don't have one of those.)

Saludos - Greetings

I hope this year, and wish the best luck to OpenBSD. For all the People who give away his knowledge, without nothing in return. Keep going. -- Atentamente Andris Genovez Tobar / Departamento Tecnico COMERCIAL SALVADOR PACHECO MORA S.A. / DESDE 1945 SPM TECNOLOGIAS Cuenca, Luis Cordero 9-70 y Gr

Re: AH+ESP and IPv6

On Tue, Dec 30, 2008 at 9:29 PM, wrote: > I'm trying to use both AH and ESP to setup IPsec using Transport mode > between two IPv6 OpenBSD 4.4 hosts. > > So far it worked for AH Transport mode or ESP Transport mode but I don't > quite know how to do both AH and ESP. Any ideas? > > Here's a snippe

[PF] IPSEC and PF/RDR rule

Hello, I wish you an happpy new year. I have some trouble with my new Openbsd router. I installed the latest version 4.4. I compile the kernel with the RAID FRAME options. This router is running services for : - OSPF - PF - CARP - IPSEC/ISAKMPD/SASYNCD I have trouble with the IPSEC and PF

Re: ftp from script

> "Daniel" == Daniel A Ramaley writes: Daniel> chdir "/path-to-dir"; You didn't check the success of the chdir. This will ruin your original current directory if that fails... Daniel> unlink <*>; Oops! The proper solution is rmtree, a function defined in File::Path: use File::

diff for xenocara' README.macppc

Hey, the iBookHacks option shouldn't be in the sample xorg.conf since it is not used anymore : bye, -- nicolas Index: README.macppc === RCS file: /cvs/openbsd/xenocara/distri

use 3 nics as hub / switch

Hi All and a happy new year, got a short question here. I'm building a home router from a blue box (embedded pc), which has 3 nics (rl0, 1, 2). Internet drops in via dhcp client on rl0. Now I got 2 NICs left and I'd like to use them similar like a hub. Just use a cross over cable and plug in 2 mor

Re: Strange WLAN issue with ral(4) in hostap mode

On Fri, 2 Jan 2009 05:45:45 +0200 Jussi Peltola wrote: > Disable power saving on the clients. > > 'zat it? Dhu

FreeBSD emulation of VMware Tools

Hi list, I'm trying to get the FreeBSD version of the VMware Tools installed in OpenBSD 4.4 under VMware Server 2.0 following the guide posted at http://www.openbsd-wiki.org/index.php?title=HowTo_install_VMWare_tools. I've had to install the freebsd_lib-4.11p0.tgz package and had to add some