On Fri, 20 Jul 2007 12:35:53 +0200 (CEST)
Markus Hennecke <[EMAIL PROTECTED]> wrote:
> > # bioctl ciss0
> > bioctl: Can't locate ciss0 device via /dev/bio
>
> The cause is that the ciss_inquiry struct returned by the firmware
> has the member buswidth set to 0 (zero). So the physical drives do
>
exactly, you just open a "gym" and people will pay you money to power the
servers
On 7/20/07, bofh <[EMAIL PROTECTED] > wrote:
>
> Well, there's the obvious solution, right? OUTSOURCE IT!!! Just
> stick the sweaty person on the outside!
>
>
> On 7/20/07, Steve Shockley <[EMAIL PROTECTED]> wrote:
> I'm trying to record audio samples using azalia and
> 4.1-Release I can monitor the audio but cannot record it.
This is fixed in -current.
Hi
I'm trying to record audio samples using azalia and 4.1-Release
I can monitor the audio but cannot record it. dd fails to read anything from
/dev/audio or /dev/sound eg. $ dd if=/dev/sound of=/tmp/raw
reads 0 bytes. The manual page for azalia(4) doesn't mention recording via
line-in or mic be
Well, there's the obvious solution, right? OUTSOURCE IT!!! Just
stick the sweaty person on the outside!
On 7/20/07, Steve Shockley <[EMAIL PROTECTED]> wrote:
Stefan Olsson wrote:
> -Apart from health this could be used to generate electricity for Theo's
> servers!
You're not looking at the b
On 20/07/07, Mark Leisher <[EMAIL PROTECTED]> wrote:
% cd /var/yp ; make
Everything builds OK (/var/yp//*.db and /etc/*.db) and I am
not running a slave.
Now as far as I know, yp uses the normal linux/unix passwd format (not
master.passwd). Did you forget pwd_mkd -p /etc/master.passwd (if you
On Fri, 20 Jul 2007 09:46:41 -0700 Mark Rolen <[EMAIL PROTECTED]>
wrote:
>Using
>the "pass quick on tun0" rule somewhere at the top of your rules
>should
>work for you, let me know if not.
>
I made the following two changes to my pf.conf and this fixed the
problem.
#set skip on { lo, tun0 }
Stefan Olsson wrote:
-Apart from health this could be used to generate electricity for Theo's
servers!
You're not looking at the big picture; if you've got some sweaty person
running the generator, that increases the cooling load in Theo's datacenter.
On 7/20/07, Rob Schmersel <[EMAIL PROTECTED]> wrote:
That looks like an old Mac modem cable (RS-422 <> RS-232), different
beast. S-video does not even have the correct signals.
The Macintosh (and some old Sun hardware) serial port uses a 8-pin
Mini-DIN, a different pinout than other more common
RafaE Brodewicz wrote:
Fred Crowson pisze:
Have you tried boot -c and enabling acpi?
After "enable acpi" and "enable acpiec"
http://brodewicz.pl/boot_acpi.jpg
Sorry for image, but this laptop doesn't have serial port to drop dmesg
output.
Regards.
I'm not sure it that's progress - but I
Hi,
yesterday I run the little c-program under the user root and it works.
Here is the source code of the program.
#include
#include
int main() {
size_t size = 936870912;
char *a = malloc(size);
if (a)
printf("yes");
else
vladas wrote:
Hi all,
Is it possible to connect to server's serial console through the
S-Video 7-pin locking "dub" connector - RS-232C cable [1]
directly without using Video/S-Video to VGA/Component Video
Converterconverter?
I need to connect to OpenBSD (RC-232C side) from windoze
(S-Video side
Dear gentleman,
i would like to know openbsd system administrator with the Dell/EMC
CX3-20 storage enginee! Is anybody using such with openbsd server?
What is your report on such matter?
Thanks in advance.
best regards.
My sincere gratitude to all those who were willing to spare both their
time and experience and offer me some advice both inside this thread as
by email sent directly to me.
A brief update for those interested :
1st : I did get an XML-based open-source copy of the form in question
from my c
On Fri, 20 Jul 2007, Marcos Laufer wrote:
> Will this be moved to -stable, or is it an uncommon thing ?
It's not very common, but the impact is pretty high. So once some more
test reports are coming in, we'll consider it.
-Otto
>
> - Original Message -
> From: "Otto Moerbeek"
Edd Barrett wrote:
Hi,
On 20/07/07, Mark Leisher <[EMAIL PROTECTED]> wrote:
I didn't see anything related in the archives, so apologies if it was
there and I missed it.
When I add a new user and rebuild the YP files, the new user is not
visible on client machines until I kill ypserv and start
Hi,
On 20/07/07, Mark Leisher <[EMAIL PROTECTED]> wrote:
I didn't see anything related in the archives, so apologies if it was
there and I missed it.
When I add a new user and rebuild the YP files, the new user is not
visible on client machines until I kill ypserv and start it again. What
am I
I didn't see anything related in the archives, so apologies if it was
there and I missed it.
When I add a new user and rebuild the YP files, the new user is not
visible on client machines until I kill ypserv and start it again. What
am I missing?
--
Mark Leisher
Hi,
the Subject Alternative Name of your certificate will be used as phase 2
IDs, ie. that's what is sent. If you want to use the Subject Canonical
Name, you have to additionlly provide an isakmpd.policy file and you have
to run isakmpd without the "-K" option. See isakpmd.policy(5).
On Fri, Ju
Hi all
I'm setting up a OBSD 4.1 ipsec gateway, against which users will
authenticate using x509 certificates. They all use personal certificates
(key usage: digSig), which contains their user name and Email in the
subject. I need to authenticate them by the whole subject, but can't
seem to f
[EMAIL PROTECTED] wrote:
Does this point to a problem with "set skip on { lo, tun0 }"? I
will try your suggestion to see if it works (pass quick on { tun0
tun1 }), but I dislike using "quick" in my rules.
I added "up" to my /etc/hostname.tun0 to see if that worked based
on one of the suggest
Mark Rolen <[EMAIL PROTECTED]> wrote:
>I had the same symptom, where I'd have to manually reload my pf
rules
>after a reboot to get OpenVPN traffic to flow. Using tcpdump
showed
>that pf was blocking all the traffic on my tun interfaces although
I had
>a "set skip" rule for them.
Here are my
Will this be moved to -stable, or is it an uncommon thing ?
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, July 19, 2007 3:09 PM
Subject: Re: fsck Segmentation fault on 4.1
On Fri, 13 Jul 2007, Otto Moerbeek wr
Stuart Henderson wrote:
On 2007/07/20 13:20, carlopmart wrote:
Stuart Henderson wrote:
On 2007/07/20 11:02, carlopmart wrote:
This is my third post about problems with OpenBSD 4.1 during last two
months ...
Yes, and someone replied with a PR (5508) they'd opened about it.
It's fixed already
On 7/20/07, vladas wrote:
Eric,
On 7/20/07, Eric Huiban wrote:
> 9 pins DB plug to fit with a 15 pins DB plug.
Did you actually read my question?
List,
Sorry for the noise, user error.
Le ven 20 jui 2007 16:06:56 CEST, vladas a C)crit:
>Eric,
>
>
>
>On 7/20/07, Eric Huiban [EMAIL PROTECTED]
>pf.net> wrote:
>> 9 pins DB plug to fit with a 15 pins DB plug.
>
>
>
>Did you actually read my question?
Yes : how to connect PC S-video plug (output connector only, separate
chrominance a
> -Urspr|ngliche Nachricht-
> Von: Stuart Henderson [mailto:[EMAIL PROTECTED]
> Gesendet: Freitag, 20. Juli 2007 01:22
> An: openbsd misc
> Betreff: Re: hardware problem?! strangely ssh error
>
> On 2007/07/20 00:02, Stuart Henderson wrote:
> > If there might be crypto hardware onboard, try
Eric,
On 7/20/07, Eric Huiban <[EMAIL PROTECTED]> wrote:
9 pins DB plug to fit with a 15 pins DB plug.
Did you actually read my question?
Le ven 20 jui 2007 14:59:17 CEST, vladas a C)crit:
>Is it possible to connect to server's serial console through the
>S-Video 7-pin locking "dub" connector - RS-232C cable [1]
>directly
The answer is simple as possible : No.
> without using Video/S-Video to VGA/Component Video
>Converterconvert
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thus "Die Gestalt" <[EMAIL PROTECTED]> spake on Fri, 20 Jul 2007
15:21:52 +0200:
> Everytime you use the option MTRR a kitten dies.
Bad Pentium Pro-Charma?
> On 7/19/07, Timo Schoeler <[EMAIL PROTECTED]> wrote:
> > Hi misc@,
> >
> > just out of cur
Everytime you use the option MTRR a kitten dies.
On 7/19/07, Timo Schoeler <[EMAIL PROTECTED]> wrote:
Hi misc@,
just out of curiosity: What's the reason for MTRR being disabled by default?
Thanks for enlightment,
Timo :)
Hi all,
Is it possible to connect to server's serial console through the
S-Video 7-pin locking "dub" connector - RS-232C cable [1]
directly without using Video/S-Video to VGA/Component Video
Converterconverter?
I need to connect to OpenBSD (RC-232C side) from windoze
(S-Video side).
[1] The pi
Hi Hagen,
Hope that helps ...
Regards
Hagen Volpers
Is your sshd-config different/modified? If your ssh client can't talk
to your own ssh daemon, might indicate they don't understand each
other and using different crypto.
Maxim
David Gwynne wrote:
> can you try a snapshot bsd.rd?
>
David,
Below is dmesg from latest 4.1 amd64 snapshot of 2007-07-19 with acpi
enabled. Still hangs at same point.
Kind regards,
Nick
--
booting cd0a:/4.1/amd64/bsd.rd: 2193904+454704+253977
On Fri, Jul 20, 2007 at 12:09:53PM +0100, Stefan Olsson wrote:
> -Apart from health this could be used to generate electricity for Theo's
> servers! Then you could put in a section on the Donations page to come over
> and do a few hours on the bike and help keeping the electricity bill down.
>
- Original Message -
From: "Karel Kulhavy" <[EMAIL PROTECTED]>
Add an everyday job to this and you get a shortage of time. Therefore I
have
developed a special open source fitness machine for computer hackers which
allows exercising while sitting at the keyboard.
Twibright Exciter: http
On 2007/07/20 13:20, carlopmart wrote:
> Stuart Henderson wrote:
>> On 2007/07/20 11:02, carlopmart wrote:
>>> This is my third post about problems with OpenBSD 4.1 during last two
>>> months ...
>> Yes, and someone replied with a PR (5508) they'd opened about it.
>> It's fixed already - src/sys/
> change president with "mild dictator", if you please
Forget it.
>>> ok, that makes it: hard dictator
>> ... in this case I will look for a nice wall and a AK47 ;-)
>
> i recently watched four documentaries on atomic and hydrogen bombs...
> errr. ooops.
... :> ...
> "WHO'S INTERESTE
Stuart Henderson wrote:
On 2007/07/20 11:02, carlopmart wrote:
This is my third post about problems with OpenBSD 4.1 during last two
months ...
Yes, and someone replied with a PR (5508) they'd opened about it.
It's fixed already - src/sys/net/if_pfsync.c 1.83.
Maybe the question to ask is "c
Hi,
Karel Kulhavy has spoken, thus:
> I wonder whether getting the graphics somehow and asking a local shop to burn
> it on a hoodie for personal use would be fair use. I'm almost sure it would.
if you would make a substitutional donation for not buying the hoodie, I
would say so, too ;)
Have a
On 2007/07/20 11:02, carlopmart wrote:
> This is my third post about problems with OpenBSD 4.1 during last two
> months ...
Yes, and someone replied with a PR (5508) they'd opened about it.
It's fixed already - src/sys/net/if_pfsync.c 1.83.
Maybe the question to ask is "can this be imported to
On Fri, 20 Jul 2007, Stephan A. Rickauer wrote:
On Fri, 20 Jul 2007 00:49:03 -0600
Joel Knight <[EMAIL PROTECTED]> wrote:
--- Quoting Doros Eracledes on 2007/07/19 at 10:42 +0100:
I have a proliant DL360-G5 and loaded 4.1-stable on it, all
hardware is detected fine.
I want see if I can get
On 2007/07/20 10:46, Gordon Ross wrote:
> Going off on a tangent here: Why is it that I've just picked this up and
> no-one else has ?
I think because you had no rules (pass or block) affecting outgoing
packets - it's quite common to start things off with just 'block'
(without specifying the direc
change president with "mild dictator", if you please
Forget it.
ok, that makes it: hard dictator
... in this case I will look for a nice wall and a AK47 ;-)
i recently watched four documentaries on atomic and hydrogen bombs...
errr. ooops.
"WHO'S INTERESTED?" - he screamed
I do
So, the
>> > change president with "mild dictator", if you please
>>
>> Forget it.
>
> ok, that makes it: hard dictator
... in this case I will look for a nice wall and a AK47 ;-)
>> > "WHO'S INTERESTED?" - he screamed
I do
>> So, there is not OpenBSD user group in berlin yet?
there has been a Berlin Uni
>>> On 20 July 2007 at 10:04, in message
<[EMAIL PROTECTED]>, Stuart Henderson
<[EMAIL PROTECTED]> wrote:
> On 2007/07/20 08:45, Gordon Ross wrote:
>> > Might be below the minimum; there's no explicit "pass out".
>>
>> No, the packets get out the "other side" of the OBSD box to the
destination,
>>
On 7/20/07, carlopmart <[EMAIL PROTECTED]> wrote:
Hi all,
This is my third post about problems with OpenBSD 4.1 during last two
months ...
Crash report from console:
How can I fix this?? I can find any bug report abot this on OpeBSD's
site
Please it is very urgent ...
Many th
Hi all,
This is my third post about problems with OpenBSD 4.1 during last two
months ...
Crash report from console:
ddb> kernel: page fault trap, code=0
Stopped at_bus_dmamap_load_mbuf +0xf: movl $0,0x18 (%esi)
ddb> show panic
the kernel did not panic
ddb> trace
_bus_dmamap_
On 2007/07/20 08:45, Gordon Ross wrote:
> > Might be below the minimum; there's no explicit "pass out".
>
> No, the packets get out the "other side" of the OBSD box to the destination,
> it's the return packets that get blocked.
Yes, exactly. Your implicit 'pass out' will allow the outbound
packe
>>> On 19 July 2007 at 23:52, in message
<[EMAIL PROTECTED]>, Stuart Henderson
<[EMAIL PROTECTED]> wrote:
> On 2007/07/19 15:38, Gordon Ross wrote:
>> Cutting down the pf ruleset to the bare minimum, I have:
>
> Might be below the minimum; there's no explicit "pass out".
> There's an implicit one,
* jean-philippe luiggi <[EMAIL PROTECTED]> [2007-07-20 03:04]:
> I'm perhaps wrong but i think the interface must exists before loading
> any rules which use it.
yes, you are almost wrong.
--
Henning Brauer, [EMAIL PROTECTED], [EMAIL PROTECTED]
BS Web Services, http://bsws.de
Full-Service ISP -
I do have an /etc/hostname.tun0 file that I created manually with
touch.
What is the theory of openvpn being the problem source? Obviously
openvpn started up correctly or I would have to do more to fix the
problem than merely running pfctl -f /etc/pf.conf. :-) Thanks for
the pfctl -sr sugg
On Fri, 20 Jul 2007 00:49:03 -0600
Joel Knight <[EMAIL PROTECTED]> wrote:
> --- Quoting Doros Eracledes on 2007/07/19 at 10:42 +0100:
>
> > I have a proliant DL360-G5 and loaded 4.1-stable on it, all
> > hardware is detected fine.
> >
> > I want see if I can get the raid controller status with b
On Fri, Apr 13, 2007 at 08:25:43AM -0400, Umnada Tyrolla wrote:
> Why isn't there some zealot out there who recodes gpl stuff into
> bsd licensed code? That would be a service to developers, at least.
Because preaching takes much less energy than sitting for long hours at a
computer and figuring
sounds nice :)
http://www.ini.unizh.ch/~stephan/talks/LinuxTag07.pdf
or in html
http://209.85.129.104/search?q=cache:Mp4bVfAMVmYJ:www.ini.unizh.ch/~stephan/talks/LinuxTag07.pdf+Stephan+A.+Rickauer+Institute+of+Neuroinformatics+(INI)+at+ETH&hl=de&ct=clnk&cd=4&gl=li&client=firefox-a
Karl-Heinz
On Fri, Apr 13, 2007 at 11:10:26AM +0200, Paul de Weerd wrote:
> It's in ! It looks very very very cool ;)
>
> Thanks Wim for such an incredibly speedy delivery !
In my last case Wim delivered very slowly. I wanted to buy an obsd hoodie as a
christmas 2006 present. Wim assured me it shouldn't be
>>> On 19 July 2007 at 18:55, in message <[EMAIL PROTECTED]>,
Dag
Richards <[EMAIL PROTECTED]> wrote:
> Gordon Ross wrote:
>> So why is this different to what I put ?
>>
>> #These three lines allow the failover mechanisms to work
>> pass on { $int_if } proto carp keep state
>> pass on { $adsl_if }
>>> On 19 July 2007 at 23:52, in message
<[EMAIL PROTECTED]>, Stuart Henderson
<[EMAIL PROTECTED]> wrote:
> On 2007/07/19 15:38, Gordon Ross wrote:
>> Cutting down the pf ruleset to the bare minimum, I have:
>
> Might be below the minimum; there's no explicit "pass out".
No, the packets get out th
Anyone having first hands experience with Intels SRCSAS144E RAID
controller? According to mfi(4) it is not only supported but also
registers nicely with bio(4).
A bioctl output would be highly appreciated, too.
Thanks,
--
Stephan A. Rickauer
-
On Wed, Jul 18, 2007 at 01:27:28PM +0400, Anton Karpov wrote:
> > RFC, anyone? :)
> >
> > > My coffee had just run out, so no keyboard harmed.
> >
> > Timo
> >
> >
>
> I like the idea of T-shirts and stickers "It's an OpenBSD thing. You
> wouldn't understand" ;-)
I have the big white Puffy sticke
I understand that hacking OpenBSD code requires a lot of time commitment
sitting in front of a computer but that people possibly also have concerns
about their health which needs regular exercise.
Add an everyday job to this and you get a shortage of time. Therefore I have
developed a special open
On Fri, 20 Jul 2007, Chris Mason wrote:
> Hi,
>
> I know I am doing something wrong as opposed to a problem with OpenBSD, but I
> can't get the stty command working correctly.
> I have searched on Google but I am unable to find any reference to it not
> working.. everyone suggests this method.
>
Joshua Smith skrev:
Anyone in or around Morgantown, WV USA?
Thanks,
Josh
Or in Trollhdttan, Sweden?
/ Andreas
63 matches
Mail list logo
