Hello,
I am having an issue that I'm not sure which device is causing.
I have a Trango Apex Lynx that plugs in to a Mikrotik CRS. I setup a
ingress vlan rule that translates this port in to an untagged svlan port,
but when I do this I lose connectivity.
The egress, vlan, and trunks are
Sounds kind of like a loop. Anything odd in the logs?
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: TJ Trout via Mikrotik-users
Date: 10/26/16 8:46 PM (GMT-07:00) To: Mikrotik
Users Subject: [Mikrotik Users] CRS210 Locking up
copper only
I have a
Id use the b5.
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Blair Davis via Mikrotik-users
Date: 11/18/16 5:39 PM (GMT-07:00) To: OWS Optimum
Wireless , Mikrotik Users
Subject: Re: [Mikrotik Users] Which could be best radio for a ptp 200Mbps link?
Kevin, We have 74 peers and 41 filters, and are above 1g a night at peak time,
we don't break 20%, Thats strictly all it does though, but seems like something
else may be wrong.
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Kevin Sullivan via Mikrotik-u
Vlans?
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Blair Davis via Mikrotik-users
Date: 5/2/17 7:06 PM (GMT-07:00) To: Mikrotik
Users Subject: [Mikrotik Users] Small setup...
I have a small network I need to modify
There are three locations, eac
It is relatively easy, just imagin vlans as imaginary ethernet ports, that just
use the same physical port. Port 1 would be your trunk port, put two or tgree
vlans on one side, and the matching vlans on the otherside, bridge the vlan
ports to the interfaces you want them to be part of.
Mikrot
I know this will be full of opinion but what is everyone considering the
best performing and stable release for RouterOS currently?
We are pretty much running all 1036's and a 1072 right now.
Thanks,
Christian Palecek
Chief Operations Officer
Cybernet1 Inc.
Hamilton, MT
_
I didn’t see anywhere you could actually modify the html for the skins but I
pretty much just went through the web interface and eliminated everything
except basic ip/ipv6/ppp/bridge/routes configuration and a couple of things in
the system menu and the whole tools menu. Left quickset ofcourse.
It just opens up to the last panel you had open under the username. If its
opening to a submap there is probably another client that is connected with the
submap open.
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Steve Barnes via Mikrotik-users
Date
There is a lot of different flow analyzer's, i haven't found any free, but the
ones i have tried have all been rather similar.
Its not too heavy on resources but less is more when it comes to flows.
Probablyshould only need to watch your primary edge interfaces.
Sincerely,
Christian Palecek
I think there is better ways to accomplish what you want to do. Tend to bring
in the bad with the good when bonding and wireless has plenty bad to bring in.
Sincerely,
Christian Palecek, COO
Grizzly Broadband, LLC
Cybernet1 | 406.363.2183 (office)
christ...@cybernet1.com
Original mess
11 matches
Mail list logo
