Have you tried just going to YouTube using your browser instead of siri?
On Fri, 4 Dec 2020, Fazil wrote:
Thanks much, Mr. Carlson.
My iPhone and this desktop are on the same network as my Mac, the phone and the
desktop are working just fine, should I still assume that it could be a network
Hi,
I wonder what will happen to a Mac device has windows 10 installed on it using
bootcamp if we reset the NVRAM!!! What will happen??
I have faced an issue, but fortunately, it was solved on its own, so I’m asking
for future reference.
I have MBP 2016 15”.
Thank you so much,
Regards,
Moha
Okay, had it been just the phone connecting, then I would have presumed it was
using cellular to connect. But since you have a separate desktop computer that
works, then your ISP is providing you with connection to the outside world.
No other ideas right now.
Dave Carlson
Woodworker, Oregonian,
A note:
I don’t know what will happen if you reset the NVRAM while Windows is installed
using bootcamp on your Mac.
> On Dec 5, 2020, at 7:51 AM, Muhammad Fayed wrote:
>
> I have had the exact same issue after waking my MBP from sleep or after a
> starting it. I have solved it by reseting the
I have had the exact same issue after waking my MBP from sleep or after a
starting it. I have solved it by reseting the NVRAM/PRAM.
Check the following steps depending on the kind of Mac you have:
https://support.apple.com/en-au/HT204063
You may need to reset the SMC as well:
https://support.ap
On my Mac running macOS Catalina, with Pages 10.3.5, I find that CMD + CTRL +
G, is the correct keyboard command to go to a specific page in a Pages document.
It is possible that you are running an older version of Pages and the keyboard
commands could be different.
You may want to go to the me
Thanks much, Mr. Carlson.
My iPhone and this desktop are on the same network as my Mac, the phone and the
desktop are working just fine, should I still assume that it could be a network
issue for which Mac is not connecting to wifi?
Thanks!
-Original Message-
From: macvisionaries@google
Sounds like your router is not connected to the internet. Do you have a cable
modem, or satellite? Something is wrong from your Wi-fi router to the outside
world. You might need to call your internet service provider and have them run
some tests.
Dave Carlson
Farfar, Engineer, Oregonian, Woodwo
Hi, Group.
How can I go to YouTube website via my Mac?
VoiceOver says my wifi is on and has signal strength is four bar but I am
unable to get Siri. She says I am having trouble now, try in a moment.
Thanks!
--
The following information is important for all members of the Mac Visionaries
list
I’m running Pages on Mac OS 10.12.6, High Sierra. I want to be able to go to a
specific page in a large Pages document. The web says I should be able to type
CTRL Command G and type a page number. That’s clearly wrong. Is there a
keyboard command to do this?
--
The following information is
Oh, I am glad I could help!
As far as Siri goes, try turning off the phone and then turning it back on
again. It’s amazing how that fixes things at times. And, yes, if your wifi
says on and you’ve got four bars, you are definitely connected. Not sure how
it is in your area, but sometimes her
Something similar that is really. Nice is the Eero. I would go basic at this
point do to wifi 6 not being in every device and most won’t benefit at this
time.
> On Dec 4, 2020, at 4:21 PM, 'Donna Goodin' via MacVisionaries
> wrote:
>
> Hi all,
>
> I'll spare you the rant, but I'm really hati
Hi all,
I'll spare you the rant, but I'm really hating my experience with the Netgear
Orby. At this point, I'm locked out of the app, the security codes they have
sent me to reset my password have more characters than the app will allow, And
I can't contact support because I'm not in the place
Thanks much, Ms. Furness, for your help and I do appreciate for that.
I followed your instructions and now VoiceOver says ‘Wifi on’ and my network is
checked and has four bars. Does it mean I am connected to the internet? If yes,
Siri still says that she is having problem with connection. Does t
Dear List,
I unpaired my watch from my old phone in order to paired it to my new phone.
After restoring from a backup, the watch says sync process 100%, Press the
Digital Crown to start.
Well, pressing it does nothing. Also pressing the side button does nothing.
So I can’t power off the watch. W
Nice thought, but yes, that was one of the first things I checked.
I think I've got it all sorted out now, it just hasn't been the smoothest phone
upgrade I've ever had.
Cheers,
Donna
> On Dec 4, 2020, at 1:44 PM, Dave Carlson wrote:
>
> Donna,
> Perhaps you have not checked your Apple ID to m
Hi!
One thing you might not be aware of is that disk utility in Recovery mode
crashes VoiceOver.
Its a bug and very annoying.
/A
> 4 dec. 2020 kl. 19:08 skrev Robert Hill :
>
> Hi all,
>
> I installed Big Sur on my MacBook Pro when it first came out.
>
> I was having some issues that I was hop
Hi!
Is it the back or the front camera that’s used?
Thanks.
/A
> 4 dec. 2020 kl. 19:05 skrev Greg Wocher :
>
> Hello,
> Usually I just place the camera right against the watch and then slowly raise
> it straight up. This usually works. I have tried to manually pair it once but
> I was not able
Hi,
Do a vo plus m twice. Arrow over to the right and you will find a menu called
wifi. Arrow down to your network’s name and vo space on it. If you have a
password, it will ask for it if you’ve never logged your mac onto your wifi.
HTH,
Cait
> On Dec 4, 2020, at 2:50 PM, Fazil wrote:
>
Hi!
Are you logged in to Icloud?
Sounds like a dumb question but it might have to do with the problem.
It sounds like a very very odd problem though.
/A
> 4 dec. 2020 kl. 14:50 skrev 'Donna Goodin' via MacVisionaries
> :
>
> Hi all,
>
> Well, subject pretty much says it all, but here are my two
Hi!
Most its when you take the watch of your wrist and put it back on again.
That’s the only time I use the passcode.
I have a question for you though.
How did you get the haptic time to work without using VoiceOver?
I know it can be done but I have no luck with that.
/A
> 3 dec. 2020 kl. 20:33 sk
Hi, Group.
I am trying to connect my MacBookPro to Wi-Fi but I don't find Network in
System Preference. I find here my name and Apple ID.
Am I doing something wrong?
Your help is much appreciated.
Thanks!
--
The following information is important for all members of the Mac Visionaries
list.
Donna,
Perhaps you have not checked your Apple ID to make sure your iPHone is
connected to that account?
Dave Carlson
Farfar, Engineer, Oregonian, Woodworker, and Pioneer
On Dec 4, 2020, at 5:50 AM, 'Donna Goodin' via MacVisionaries
wrote:
Hi all,
Well, subject pretty much says it all, but h
I don't know if they're available in Chrome or any other browser. when I was
trying to play content on Rumble, Ray told me to disable styles in the
developer menu in Safari. this worked great for playing on alternative video
sites but it really messed up shopping. luckily it's not hard to toggle
Well, I don't know how you do it. I gave it another go after reading your
message, but ended up resetting my watch. *sigh*
Cheers,
Donna
> On Dec 4, 2020, at 12:05 PM, Greg Wocher wrote:
>
> Hello,
> Usually I just place the camera right against the watch and then slowly raise
> it straight u
Hi all,
I installed Big Sur on my MacBook Pro when it first came out.
I was having some issues that I was hoping to resolve by erasing my drive and
starting over.
When I went into disk utilities, I wasn't able to erase my drive, that option
was dimmed out.
So I went into recovery mode hoping
Hello,
Usually I just place the camera right against the watch and then slowly raise
it straight up. This usually works. I have tried to manually pair it once but I
was not able to get the watch to show up to pair.
Greg Wocher
> On Dec 4, 2020, at 12:57 PM, 'Donna Goodin' via MacVisionaries
Thank you! Disabling screen rec did the trick for the app store. How do you get
the watch to line up with the camera? I've never been able to do that.
Cheers,
Donna
> On Dec 4, 2020, at 9:10 AM, Greg Wocher wrote:
>
> Hello,
> If you are using a iPhone 10R or above voiceovers recognition option
Hi, Group.
I am new to my MacBookPro 2017.
How can I connect it to WI-FI, please?
Any help is much appreciated.
Thanks!
--
The following information is important for all members of the Mac Visionaries
list.
If you have any questions or concerns about the running of this list, or if you
fee
Thanks much, Jonathan.
I was able to pair the keyboard successfully.
From: macvisionaries@googlegroups.com On
Behalf Of Jonathan C. Cohn
Sent: Friday, December 04, 2020 5:00 AM
To: macvisionaries@googlegroups.com
Subject: Re: Connecting Bluetooth Keyboard to My MacbookPro?
1. open system
Oh, and by the way, using your watch for messages is super convenient. Being
able to just raise your wrist and respond is a lot faster than opening up your
phone.
Cheers,
Donna
> On Dec 4, 2020, at 9:23 AM, Paul Hopewell wrote:
>
> Hello Donna,
>
> In response to your question of how I plan
Hi Paul,
I don't use it for mail or music or podcasts, but I do use it for messages,
heart rate, blood oxygen, sleep, work-outs. I also use the modular face, which
has five complications. My complications are set to display sunrise/sunset,
time, temperature, activity data, date and phase of the
Hello Donna,
In response to your question of how I plan to use my Apple watch in silent mode
with VoiceOver off. First I have only had the watch for 4 days and am thus
still learning! In addition to telling the time I am using haptic alarms from
the Alarm App and am viewing all the great health
Hello,
If you are using a iPhone 10R or above voiceovers recognition options might be
interfering with the App Store. If you can turn off screen recognition for the
App Store and this might help. As for the watch I am not sure. I have never
used pair manually. I always use the camera.
Greg Woch
Hi all,
Well, subject pretty much says it all, but here are my two questions for the
list.
I can’t access the app store from either phone now. The My Account Button isn’t
even there, all I get is a screen showing best apps of 2020. Any thoughts?
Second, the new phone won’t see my watch. As in,
1. open system preferences 2. switch to the bluethooth pane by finding
bluethooth and then pressing space.
3. turn on your keyboard following the insteaructions to start pairing.
4. find the table in system preferences and interact with that.
:. move up and down that table until you find the key
36 matches
Mail list logo
