> If you use Coreldraw, don't export to jpg you graphic, but directly to eps
> type 2 and you will have best quality and no pixelated contours.
thats what I did, normaly I do the complete drawing but in this case I had to
include a jg.
With GIF-Export it works fairly well, thats what I found ou
On 2009-05-25, Robert Neumann wrote:
> Guenter Milde writes:
> I found a solution which is acceptable for me: I export it from
> CorelDraw as a grayscale-Gif. This works fairly well, at least I can
> life with that... Regards Robert
Fine. Generally, JPEG is not suited for drawings or any images
> Well, seems like the time to apologize. It was my point of view and I
> was wrong. Next time, I try to be more constructive...
Accepted;-)
Next time I have a problem, I will post the link to the old thread about the
strange fact that the newer latex takes more than twice the time immediately.
Guenter Milde writes:
> Do you scale the figure in question or set a fixed size? Re-sizing pixel
> images can lead to bad surprises.
yes, I just tried with 100%: No Difference.
> EPS and PDF can both "include" JPEG and PNG images -- in newer versions.
> Some convertors, however, will default
Guenter Milde schrieb:
On 2009-05-22, Florian Rubach wrote:
Robert Neumann schrieb:
Hello,
I have a problem with the quality of jpg-images.
...
I' using Lyx 1.3.4 on a Suse Linux (and I dont want to update, because
all new lyx are slower it has to to with the latex)
On 2009-05-23, Robert Neumann wrote:
> Hello Wayan,
> I usually use eps for all my vektordrawings, but once in a while I have
> to include an jpg, but the funny thing is, that it works with Lyx 1.5
> on a Suse 11,so it seems to be possible. The ps-File on my old Suse with
> Lyx 1.3 has no pixels
On 2009-05-22, Florian Rubach wrote:
> Robert Neumann schrieb:
>> Hello,
>> I have a problem with the quality of jpg-images.
> ...
>> I' using Lyx 1.3.4 on a Suse Linux (and I dont want to update, because
>> all new lyx are slower it has to to with the latex)
> Seriously, what do you expect? If y
Hello Wayan,
I usually use eps for all my vektordrawings, but once in a while I have
to include an jpg, but the funny thing is, that it works with Lyx 1.5
on a Suse 11,so it seems to be possible. The ps-File on my old Suse with
Lyx 1.3 has no pixels either when I export to ps(as I just posted in
Hi Steve,
thanks for the shell skript. I will work with this later, unfortunately I have
only my old Lyx 1.3.4 on an old Suse Linux 9.1 and because of YAST I could not
install a newer Lyx on the same machine. But I have a Lyx 1.5 on a Suse Linux
11.
It is a strange situation now:
- I tried with Ly
Robert Neumann wrote:
What I do not understand is:If you compare LyX 1.3 and LyX 1.6 on the same
system (using the same LaTeX installation), do you see a delay then?
As far as I remember: no. But I remember that it was extremly difficult to
install 1.4 on the SuSE Linux, because of YAST, which
Robert Neumann wrote:
> As far as I remember: no. But I remember that it was extremly difficult to
> install 1.4 on the SuSE Linux, because of YAST, which sticks to the lyx,
> that came with the distribution. (And I'm not such a Linux Pro that I could
> override this).
It will certainly be difficu
> What I do not understand is:If you compare LyX 1.3 and LyX 1.6 on the same
> system (using the same LaTeX installation), do you see a delay then?
As far as I remember: no. But I remember that it was extremly difficult to
install 1.4 on the SuSE Linux, because of YAST, which sticks to the lyx,
st quality and no pixelated contours.
>
> - Original Message - From: "Robert Neumann"
> To:
> Sent: Friday, May 22, 2009 10:32 AM
> Subject: Problems with jpg-quality with ps2pdf
>
>
> > Hello,
> > I have a problem with the quality of jpg-im
Robert Neumann wrote:
> It was definitely a big time-difference, with the books I was writing on
> with my last machine, it increased from 8 sec. to 25 or so and this feels
> like hours;-) I think it is no lyx problem but a latex-caused problem.
What I do not understand is:If you compare LyX 1.3 a
> It would be interesting to know what exactly causes this difference.
I spent two days on this, a couple of years ago, then I gave up and switched
back to the old Lyx. You can find the discussion here:
http://thread.gmane.org/gmane.editors.lyx.general/34234/focus=34251
It was definitely a big
On Friday 22 May 2009 12:41:20 pm Robert Neumann wrote:
> Thankx for the very nice advice, especially the sarcastic note!
> I write books with about 250 pages and 10 pic. On the "old" Lyx it takes
> around 25 sec. to produce a pdf, on the newer lyx it takes around 40 sec.
> When I do the final work
Robert Neumann wrote:
> I write books with about 250 pages and 10 pic. On the "old" Lyx it takes
> around 25 sec. to produce a pdf, on the newer lyx it takes around 40 sec.
> When I do the final work I have to produce quite a lot of pdfs to check
> the pages. So just give it a try and count twenty
If you use Coreldraw, don't export to jpg you graphic, but directly to eps
type 2 and you will have best quality and no pixelated contours.
- Original Message -
From: "Robert Neumann"
To:
Sent: Friday, May 22, 2009 10:32 AM
Subject: Problems with jpg-quality with ps2
Thankx for the very nice advice, especially the sarcastic note!
I write books with about 250 pages and 10 pic. On the "old" Lyx it takes
around 25 sec. to produce a pdf, on the newer lyx it takes around 40 sec.
When I do the final work I have to produce quite a lot of pdfs to check
the pages. So
Robert Neumann schrieb:
Hello,
I have a problem with the quality of jpg-images.
...
I' using Lyx 1.3.4 on a Suse Linux (and I dont want to update, because all new
lyx are slower it has to to with the latex)
Seriously, what do you expect? If you're not willing to upgrade, I don't
think there
Hello,
I have a problem with the quality of jpg-images.
I have a jpg image with best quality, made with coreldraw (actually I use
coreldraw to to work on the existing jpg-file, which contains function-graphs
and other curves)
When I open it, the quality is good, there are no "little dots" from the
21 matches
Mail list logo
