On Thu, 2008-02-14 at 18:11 +0100, Joakim Tjernlund wrote:
> Remove bogus UCC regs range test and correct
> off by one error in call to ucc_set_qe_mux_mii_mng()
>
> Signed-off-by: Joakim Tjernlund <[EMAIL PROTECTED]>
> ---
>
> I am not 100% sure this is the correct fix, please ACK or NACK
>
> d
From: Ananth N Mavinakayanahalli <[EMAIL PROTECTED]>
Fix sparse warnings in powerpc kprobes:
CHECK arch/powerpc/kernel/kprobes.c
arch/powerpc/kernel/kprobes.c:277:6: warning: symbol
'kretprobe_trampoline_holder' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:287:15: war
On Thu, Feb 14, 2008 at 08:36:40PM -0800, David Brownell wrote:
[...]
> > The point was: GPIOs could be "input only" but you still have
> > "output" callback, and that doesn't troubles anybody. Not sure
> > why set_dedicated() such a big issue then, it could fail too! :-)
>
> See above: you're eq
Hi Scott,
I apologize for bringing this after so much time. Hope the "better late than
never" motto applies.
On Friday 21 September 2007 00:01, Scott Wood wrote:
> The existing OF glue code was crufty and broken. Rather than fix it, it
> will be removed, and the ethernet driver now talks to the
Add regshift reading to serial drivers.
This enables correct operation of serial ports with
nonzero regshift such as Xilinx opb 16550 uart.
Signed-off-by: Pavel Kiryukhin <[EMAIL PROTECTED]>
arch/powerpc/kernel/legacy_serial.c |6 +-
drivers/serial/of_serial.c |6 --
2
The mdio_port, mdio_bit, mdc_port and mdc_bit fields in the
fs_mii_bb_platform_info structure are left-overs from the move to the Phy
Abstraction Layer subsystem. They can be safely removed.
Signed-off-by: Laurent Pinchart <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/fsl_soc.c |4
includ
Add uart 16550 properties description to Xilinx portion of
booting-without-of.txt
Signed-off-by: Pavel Kiryukhin <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 16 ++--
1 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/Documentation/powerpc/boo
So, like, the other day David Gibson mumbled:
> For ages dtc has included a sample dts, comment-test.dts, for checking
> various lexical corner cases in comment processing. In fact, it
> predates the automated testsuite, and has never been integrated into
> it. This patch addresses this oversight
Dave Hansen <[EMAIL PROTECTED]> wrote on 14.02.2008 18:12:43:
> On Thu, 2008-02-14 at 09:46 +0100, Christoph Raisch wrote:
> > Dave Hansen <[EMAIL PROTECTED]> wrote on 13.02.2008 18:05:00:
> > > On Wed, 2008-02-13 at 16:17 +0100, Jan-Bernd Themann wrote:
> > > > Constraints imposed by HW / FW:
>
On Sun, 10 Feb 2008 20:24:02 +0100
Wolfgang Ocker <[EMAIL PROTECTED]> wrote:
> From: Wolfgang Ocker <[EMAIL PROTECTED]>
>
> Corrected IRQ triggering and level settings according to latest revision
> of the 440EP User Manual (rev 1.24 nov 16, 2007).
>
> The incorrect settings might cause a failur
Am Freitag, den 15.02.2008, 13:50 +0100 schrieb Laurent Pinchart:
> We're loosing the possibility of having MDC and MDIO on different ports. This
> is quite easy to fix for the non-CONFIG_PPC_CPM_NEW_BINDING case but I'm not
> familiar with OF bindings (yet) to fix the CONFIG_PPC_CPM_NEW_BINDIN
> + - reg-shift : registers offset shift (standard uart_port
field).
> + Property is optional if regshift is zero.
I was hoping to get an idea of what is required here, or when I might
use it?
It looks like the ARCH=ppc code instantiates this with a reg-shift of
2... Is this the e
On Fri, 2008-02-15 at 14:22 +0100, Christoph Raisch wrote:
> A translation from kernel to ehea_bmap space should be fast and
> predictable
> (ruling out hashes).
> If a driver doesn't know anything else about the mapping structure,
> the normal solution in kernel for this type of problem is a multi
Stephen Neuendorffer wrote:
>> + - reg-shift : registers offset shift (standard uart_port
> field).
>> + Property is optional if regshift is zero.
>
> I was hoping to get an idea of what is required here, or when I might
> use it?
>
> It looks like the ARCH=ppc code instantiates thi
> -Original Message-
> From: Pavel Kiryukhin [mailto:[EMAIL PROTECTED]
> Sent: Friday, February 15, 2008 9:41 AM
> To: Stephen Neuendorffer
> Cc: linuxppc-dev@ozlabs.org
> Subject: Re: [PATCH] booting-without-of: add Xilinx uart 16550.
>
> Stephen Neuendorffer wrote:
> >> + - reg-s
On Thu, Feb 14, 2008 at 10:49:42PM -0800, Andrew Morton wrote:
> On Tue, 5 Feb 2008 18:44:32 +0300 Anton Vorontsov <[EMAIL PROTECTED]> wrote:
>
> > This patch adds support for the framebuffers with non-native
> > endianness. This is done via FBINFO_FOREIGN_ENDIAN flag that will
> > be used by the
On 14/02/2008, Tony Breeds <[EMAIL PROTECTED]> wrote:
> On Tue, Feb 12, 2008 at 01:11:58AM -0600, Manish Ahuja wrote:
> > +static ssize_t
> > +show_release_region(struct kset * kset, char *buf)
> > +{
> > + return sprintf(buf, "ola\n");
> > +}
> > +
> > +static struct subsys_attribute r
The linux-next-20080215 kernel build fails on the powerpc with
following error
CC arch/powerpc/platforms/powermac/setup.o
In file included from arch/powerpc/platforms/powermac/setup.c:66:
include/asm/mediabay.h:29: error: syntax error before 'ide_hwif_t'
include/asm/mediabay.h:2
On Sat Feb 16 00:40:01 EST 2008, Pavel Kiryukhin pkiryukhin wrote:
> Add uart 16550 properties description to Xilinx portion of
> booting-without-of.txt
This patch description is a bit weak. How about adding what properties
are being added. Also, as described below, it's going to become more
Anton Vorontsov wrote:
> Probably CONFIG_MTD_OF_PARTS is not set?
>
> Good luck,
>
That was it! Thanks!
Cheers,
Sean
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
On Sat Feb 16 00:30:09 EST 2008, Pavel Kiryukhin wrote:
> Add regshift reading to serial drivers.
> This enables correct operation of serial ports with
> nonzero regshift such as Xilinx opb 16550 uart.
>
> Signed-off-by: Pavel Kiryukhin
This patch is incomplete in that it does not add support to
Grant Likely wrote:
>>Add uart 16550 properties description to Xilinx portion of
>>booting-without-of.txt
>> Signed-off-by: Pavel Kiryukhin <[EMAIL PROTECTED]>
>> ---
>> Documentation/powerpc/booting-without-of.txt | 16 ++--
>> 1 files changed, 14 insertions(+), 2 deletions(-)
>>
On Fri, Feb 15, 2008 at 11:56 AM, Sergei Shtylyov
<[EMAIL PROTECTED]> wrote:
> Grant Likely wrote:
>
> >> + Xilinx uart 16550 device registers are compatible with all
> standard 16540
> >> + and 16550 UARTs.
>
>
> > Not strictly true; the xilinx uart is *almost* compatible with the
>
Sean MacLennan wrote:
> I did a git pull of Josh's for-2.6.25 tree. Now the NOR partitions are
> no longer setup.
>
> [EMAIL PROTECTED],0 {
> compatible = "amd,s29gl032a",
> "cfi-flash";
> b
dt_mem_next_cell() currently does of_read_ulong(). This does
not allow for the case where #size-cells and/or #address-cells = 2 on
a 32-bit system, as it will end up reading 32 bits instead of the
expected 64. Change it to use of_read_number instead and always return
a u64.
Signed-off-by: Becky B
On Fri, Feb 15, 2008 at 6:40 AM, Pavel Kiryukhin
<[EMAIL PROTECTED]> wrote:
> Add uart 16550 properties description to Xilinx portion of
> booting-without-of.txt
>
> Signed-off-by: Pavel Kiryukhin <[EMAIL PROTECTED]>
> ---
> Documentation/powerpc/booting-without-of.txt | 16 ++--
Grant Likely wrote:
>> >> + Xilinx uart 16550 device registers are compatible with all
>> >> standard 16540
>> >> + and 16550 UARTs.
>> > Not strictly true; the xilinx uart is *almost* compatible with the
>> > ns16550. The same driver can be made to work, but it is not register
>> > l
On Fri, Feb 15, 2008 at 02:11:06PM -0500, Sean MacLennan wrote:
> I did a git pull of Josh's for-2.6.25 tree. Now the NOR partitions are
> no longer setup.
>
> [EMAIL PROTECTED],0 {
> compatible = "amd,s29gl032a",
> "cfi-flash";
On Fri, Feb 15, 2008 at 12:14 PM, Sergei Shtylyov
<[EMAIL PROTECTED]> wrote:
> Grant Likely wrote:
> > The registers are not at the same location, therefore it is not compatible.
>
> > However, the *driver* can be easily made compatible with the devices.
> > We just teach the driver to bind agai
The lock acquisition in fs_ioctl() does not appear to actually be necessary,
and thus is simply removed.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
This fixes the following bug:
http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051564.html
drivers/net/fs_enet/fs_enet-main.c |7 +-
On Wed, 2008-02-13 at 17:09 -0800, David Miller wrote:
> I've taken into consideration the various feedback, and
> ported the bug fix and other LMB patches posted recently
> in an effort to keep the patch churn by others down wrt.
> my moving of these files.
>
> 1) Use HAVE_LMB as suggested by Sam
> > Instead of attempting to come up with a generic description
> > of this, I recommend just naming it after the actual device
instance;
> > something like compatible="xlnx,opb-uart16550";
>
> Well, that means that we'll need a to add a code which "glues" the
chip to
> 8250.c driver... well,
I did a git pull of Josh's for-2.6.25 tree. Now the NOR partitions are
no longer setup.
[EMAIL PROTECTED],0 {
compatible = "amd,s29gl032a",
"cfi-flash";
bank-width = <2>;
On Thu, 14 Feb 2008 14:15:31 -0800 (PST)
David Miller <[EMAIL PROTECTED]> wrote:
> From: Josh Boyer <[EMAIL PROTECTED]>
> Date: Thu, 14 Feb 2008 15:24:48 -0600
>
> > I plan on actually testing this on Ebony, Walnut, and Bamboo either
> > later tonight or tomorrow. I don't expect many issues.
> >
Scott Wood wrote:
> The lock acquisition in fs_ioctl() does not appear to actually be
> necessary, and thus is simply removed.
>
> Signed-off-by: Scott Wood <[EMAIL PROTECTED]> ---
> This fixes the following bug:
> http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051564.html
>
> drivers/ne
On Fri, Feb 15, 2008 at 01:17:16AM -0600, Manish Ahuja wrote:
> Tony Breeds wrote:
> > Any reason this sysfs attribute can't be write only? The show method
> > doesn't seem needed.
>
> yes, its used later in the code.
I see that now, thanks. From my point of view it would make reviewing
these p
On Fri, 15 Feb 2008 09:00:28 +1100
Paul Mackerras <[EMAIL PROTECTED]> wrote:
> Linus,
>
> Please do
>
> git pull \
> git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git merge
>
> to get a collection of bug-fixes and very minor cleanups for powerpc
> (plus one commit wiring up the t
From: Michael Ellerman <[EMAIL PROTECTED]>
Date: Sat, 16 Feb 2008 06:05:37 +1100
> That fixes the build failures I was seeing, ack.
Thanks for testing.
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-de
Jean Delvare wrote:
> Please split your patch into logical parts:
> * Whitespace and coding-style cleanups
> * Other cleanups (e.g. changing the log levels)
> * Add OF support
>
Here is the first patch with everything except the OF support. Really
all I did was change the log levels based on fe
Here is the of platform patch. I removed the retries and removed the spaces
used for spacing.
Cheers,
Sean
Signed-off-by: Sean MacLennan <[EMAIL PROTECTED]>
---
--- old-i2c-ibm_iic.c 2008-02-15 23:01:58.0 -0500
+++ i2c-ibm_iic.c 2008-02-15 23:00:44.0 -0500
@@ -6,6 +6,9
Hi,
The softlockup is seen from 2.6.25-rc1-git{1,3} and is visible in the
2.6.24-rc2 kernel,
While booting up with the 2.6.25-rc1-git{1,3} and 2.6.25-rc2 kernel(s) on the
powerbox
Loading st.ko module
BUG: soft lockup - CPU#1 stuck for 61s! [insmod:379]
NIP: c01b0620 LR: c01a5dc
41 matches
Mail list logo
