On Thu, 10 Jan 2008, Daniel Walker wrote:
> This probe_mutex conforms to the new struct mutex type.
> This patch converts it from the old semaphore to the new struct mutex.
The PS3 tree already has this change.
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Network and Software T
Greg,
I'm getting the following message from the kernel on an embedded ppc32
system:
PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for :00:00.0
The HW setup is a PCIe host controller and an e1000 NIC card. It
appears that pci_bus_assign_resources() is trying to call
pci_as
Hi Jon,
On Wed, 19 Dec 2007 23:41:36 -0500, Jon Smirl wrote:
> Since copying i2c-mpc.c to maintain support for the ppc architecture seems to
> be an issue; instead rework i2c-mpc.c to use CONFIG_PPC_MERGE #ifdefs to
> support both the ppc and powerpc architecture. When ppc is deleted in six
> m
On Jan 11, 2008, at 2:41 AM, Jiri Slaby wrote:
> On 01/11/2008 09:29 AM, Kumar Gala wrote:
>> Greg,
>> I'm getting the following message from the kernel on an embedded
>> ppc32 system:
>> PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for
>> :00:00.0
>> The HW setup is a PCIe h
On Fri, 2008-01-11 at 09:20 +0100, Geert Uytterhoeven wrote:
> On Thu, 10 Jan 2008, Daniel Walker wrote:
> > This probe_mutex conforms to the new struct mutex type.
> > This patch converts it from the old semaphore to the new struct mutex.
>
> The PS3 tree already has this change.
>
> With kind
This completely untested patch is intended to be a suggestion only:
Code inspection for an entirely different purpose made me stumble
across this, and I think that modifying the string table of an ELF
object is a bad idea, since there's nothing disallowing a linker to
merge strings inside the table
Hi Sean,
On Fri, 11 Jan 2008 02:10:45 -0500 Sean MacLennan <[EMAIL PROTECTED]> wrote:
>
> Stephen Rothwell wrote:
> > On Wed, 09 Jan 2008 15:19:13 -0500 Sean MacLennan <[EMAIL PROTECTED]> wrote:
> >
> >> No comments? I really thought I would get raked over the coals for this
> >> one.
> >
> >
On 01/11/2008 09:29 AM, Kumar Gala wrote:
> Greg,
>
> I'm getting the following message from the kernel on an embedded ppc32
> system:
>
> PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for :00:00.0
>
> The HW setup is a PCIe host controller and an e1000 NIC card. It
> appears
On 01/11/2008 10:07 AM, Kumar Gala wrote:
>
> On Jan 11, 2008, at 2:41 AM, Jiri Slaby wrote:
>
>> On 01/11/2008 09:29 AM, Kumar Gala wrote:
>>> Greg,
>>> I'm getting the following message from the kernel on an embedded
>>> ppc32 system:
>>> PCI: Failed to allocate mem resource #9:[EMAIL PROTECTE
Hi Linus, Andrew,
Here are 2 more fixes for ps3fb:
[1] ps3fb: prevent use after free of fb_info
[2] ps3fb: fix deadlock on kexec()
The first one fixes a potential use after free.
The second one fixes a lockup when using kexec or shutdown while /dev/fb0 is
open (e.g. when using the pet
On Wed, 9 Jan 2008 08:03:31 -0700
"Grant Likely" <[EMAIL PROTECTED]> wrote:
> Gah; teach me to pick up patches right before bed. I shouldn't have
> picked up the ulite console changes patch just yet. I've dropped it
> from the series until I have a chance to rework it. Sorry.
>
> Here's the ne
So, like, the other day Josh Boyer mumbled:
> On Fri, 11 Jan 2008 07:44:33 -0600
> Jon Loeliger <[EMAIL PROTECTED]> wrote:
>
> > So, like, the other day David Gibson mumbled:
> > > This patch adds an fdt_set_name() function to libfdt, mirroring
> > > fdt_get_name(). This is a r/w function which a
On Fri, 11 Jan 2008 07:44:33 -0600
Jon Loeliger <[EMAIL PROTECTED]> wrote:
> So, like, the other day David Gibson mumbled:
> > This patch adds an fdt_set_name() function to libfdt, mirroring
> > fdt_get_name(). This is a r/w function which alters the name of a
> > given device tree node.
> >
> >
Am Donnerstag, den 10.01.2008, 19:41 +0100 schrieb Heiko Schocher:
> Hello Scott,
>
> Scott Wood wrote:
> > Heiko Schocher wrote:
> >> diff --git a/drivers/net/fs_enet/fs_enet-main.c
> >> b/drivers/net/fs_enet/fs_enet-main.c
> >> index f2a4d39..f432a18 100644
> >> --- a/drivers/net/fs_enet/fs_ene
Olof Johansson wrote:
> Having been in a similar situation myself (needing to share resources
> between DMA, ethernet and function offload), I recommend creating a
> separate small library that all those drivers use, instead of making
> some sort of dependency between drivers in completely differe
From: Jeremy Kerr <[EMAIL PROTECTED]>
In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in
dev->core.driver_data) to be free()ed, which we potentially access
from the ps3fbd kthread.
This change frees the framebuffer after stopping the ps3fbd kthread.
Signed-off-by: Jeremy Kerr <[EM
From: Jeremy Kerr <[EMAIL PROTECTED]>
Since the introduction of the acquire_console_sem calls in
0333d83509c7d8496c8965b5ba9bc0c98e83c259, kexecing can cause the
kernel to deadlock:
ps3fb_shutdown()
-> unregister_framebuffer()
-> fb_notifier_call_chain(FB_EVENT_FB_UNBIND)
-> fbcon_fb_unbin
On 1/11/08, Jean Delvare <[EMAIL PROTECTED]> wrote:
> Hi Jon,
>
> On Wed, 19 Dec 2007 23:41:36 -0500, Jon Smirl wrote:
> > Since copying i2c-mpc.c to maintain support for the ppc architecture seems
> > to be an issue; instead rework i2c-mpc.c to use CONFIG_PPC_MERGE #ifdefs to
> > support both th
On Jan 11, 2008, at 3:13 AM, Jiri Slaby wrote:
> On 01/11/2008 10:07 AM, Kumar Gala wrote:
>> On Jan 11, 2008, at 2:41 AM, Jiri Slaby wrote:
>>> On 01/11/2008 09:29 AM, Kumar Gala wrote:
Greg,
I'm getting the following message from the kernel on an embedded
ppc32 system:
PCI
On 10/01/2008, Nathan Lynch <[EMAIL PROTECTED]> wrote:
> Mike Strosaker wrote:
> >
> > At the risk of repeating what others have already said, the PHYP-assistance
> > method provides some advantages that the kexec method cannot:
> > - Availability of the system for production use before the dump d
Kumar Gala napsal(a):
> I saw that patch, but if you notice that its just x86 specific and I'm
> having the issue on a powerpc 32-bit system.
My bad, sorry.
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxpp
> From: Rune Torgersen
> Finally got it (sort-of) working.
> Turned out that for some reason the console init is setting
> the baudrate
> to 9600
> the options string passed in to the console init fuunction is NULL.
>
> Any idea oon how this should be passed in from u-boot?
Ok, needed a valid co
On Fri, 11 Jan 2008 02:10:45 -0500
Sean MacLennan <[EMAIL PROTECTED]> wrote:
>
> Signed-off-by: Sean MacLennan <[EMAIL PROTECTED]>
> ---
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 66a3d8c..b3e4c35 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -469,7
On Fri, 11 Jan 2008 01:15:48 -0500
Sean MacLennan <[EMAIL PROTECTED]> wrote:
> David Gibson wrote:
> > Or possibly what you actually want is:
> > [EMAIL PROTECTED],0 {
> > reg = <2 0 2200>;
> > ...
> > };
> >
> That is what I want. I was missing a call to
> ibm4
Hello, Eugene,
The h/w snooping mechanism you are talking about is limited to the Low
Latency (LL) segment of the PLB bus in ppc440sp and ppc440spe chips (see
section "7.2.7 L2 Cache Coherency" of the ppc440spe spec), whereas DMA and
XOR engines use the High Bandwidth (HB) segment of PLB bus
Ben,
Will this impact the apple fix? I'm getting some _IO cases hitting this.
- k
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index d394d41..42a9dab 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -807,6 +807,7 @@ stat
So, like, the other day David Gibson mumbled:
> This patch adds an fdt_set_name() function to libfdt, mirroring
> fdt_get_name(). This is a r/w function which alters the name of a
> given device tree node.
>
> Signed-off-by: David Gibson <[EMAIL PROTECTED]>
Applied.
jdl
___
On Fri, Jan 11, 2008 at 02:29:28AM -0600, Kumar Gala wrote:
> Greg,
>
> I'm getting the following message from the kernel on an embedded ppc32
> system:
>
> PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for :00:00.0
>
> The HW setup is a PCIe host controller and an e1000 NIC card.
On Fri, Jan 11, 2008 at 06:24:46PM +0300, Yuri Tikhonov wrote:
>
> Hello, Eugene,
>
> The h/w snooping mechanism you are talking about is limited to the Low
> Latency (LL) segment of the PLB bus in ppc440sp and ppc440spe chips (see
> section "7.2.7 L2 Cache Coherency" of the ppc440spe spec),
So, like, the other day Scott Wood mumbled:
> Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
> ---
> srcpos.c |4 ++--
> srcpos.h |2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
Oh yeah.
jdl
___
Linuxppc-dev mailing list
Linuxppc-dev@
Rune Torgersen wrote:
> Ok, needed a valid console= line on the command line. WHen we tried
> that, we had a typo, so it was not recognized.
> Our old 2.6.18 arch/ppc kernel didn't need a console parameter, it got
> the baudrate from u-boot somehow.
> Anyway of doing that here too?
You could add s
Hi Jon,
On Wed, 19 Dec 2007 23:41:38 -0500, Jon Smirl wrote:
> This patch allows new style i2c chip drivers to have alias names using
> the official kernel aliasing system and MODULE_DEVICE_TABLE(). I've
> tested it on PowerPC and x86. This change is required for PowerPC
> device tree support.
Yo
Rune Torgersen wrote:
>> From: Scott Wood
>>
>> You could add something to the cuboot code to fill in current-speed
>> based on the value in the bd_t.
>>
>
> Ahh.. That was what I'm missing.
> Where in the devicetree is that supposed to be at?
In the serial node.
-Scott
___
On Fri, 11 Jan 2008 10:52:56 -0500, Jon Smirl wrote:
> On 1/11/08, Jean Delvare wrote:
> > Now that I have read all the previous versions of this patch series
> > and, more importantly, all objections that were raised on the way, I
> > can start reviewing the latest iteration of your patches. I'll
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
srcpos.c |4 ++--
srcpos.h |2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/srcpos.c b/srcpos.c
index 7d0f0a7..c8eaa1e 100644
--- a/srcpos.c
+++ b/srcpos.c
@@ -104,7 +104,7 @@ struct dtc_file *dtc_open_file(const char *
On 1/11/08, Jean Delvare <[EMAIL PROTECTED]> wrote:
> Secondly, it promotes OF device names as acceptable aliases. This I
> don't think I agree with. While I see some value in moving the OF name
> -> Linux name translation to the drivers themselves (even though I
> don't see this as a mandatory mov
The reg property in fsl soc nodes should be removed.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/fsl_soc.c | 14 +++---
1 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3ace747..
On Jan 11, 2008, at 11:50 AM, Greg KH wrote:
> On Fri, Jan 11, 2008 at 02:29:28AM -0600, Kumar Gala wrote:
>> Greg,
>>
>> I'm getting the following message from the kernel on an embedded
>> ppc32
>> system:
>>
>> PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for
>> :00:00.0
>>
Stephen Rothwell wrote:
> I don't where that function is actually defined - I assume it is in one
> of the other recent patch sets.
>
> /me searches ...
> /me reads "ad7414 driver" email ...
> /me notes spaces missing there as well :-)
>
>
I didn't write the ad7414 driver and wanted to change th
This board is also resold by Freescale under the names
"QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/boot/Makefile |3 +-
arch/powerpc/boot/dts/ep8248e.dts | 205
arch/powerpc/boot/ep824
On Fri, 11 Jan 2008 01:17:51 -0500
Sean MacLennan <[EMAIL PROTECTED]> wrote:
> Update based on fixes to warp.dts.
>
> Signed-off-by: Sean MacLennan <[EMAIL PROTECTED]>
Looks good.
josh
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozla
Some hardware, such as the enhanced local bus controller used on some
mpc83xx chips, does ecc transparently when reading and writing data, rather
than providing a generic calculate/correct mechanism that can be exported to
the nand subsystem.
The subsystem should not BUG() when calculate, correct,
On Sat, Jan 05, 2008 at 01:38:17PM +0100, Stefan Roese wrote:
> On Saturday 05 January 2008, Benjamin Herrenschmidt wrote:
> > On Sat, 2008-01-05 at 10:50 +0100, Stefan Roese wrote:
> > > Performance tests done by AMCC have shown that 256 buffer increase the
> > > performance of the Linux EMAC driv
> From: Scott Wood
>
> You could add something to the cuboot code to fill in current-speed
> based on the value in the bd_t.
>
Ahh.. That was what I'm missing.
Where in the devicetree is that supposed to be at?
___
Linuxppc-dev mailing list
Linuxppc-
On Fri, Jan 11, 2008 at 10:13:23AM +0100, Jiri Slaby wrote:
> On 01/11/2008 10:07 AM, Kumar Gala wrote:
>> On Jan 11, 2008, at 2:41 AM, Jiri Slaby wrote:
>>> On 01/11/2008 09:29 AM, Kumar Gala wrote:
Greg,
I'm getting the following message from the kernel on an embedded ppc32
system
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/boot/.gitignore |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index a424be6..c89cf13 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc
Hi.
We're trying to port 2.6.24-rc7 to a board.
Right now wr're battling with the device tree and PCI.
Our board is somewhat loosely based on a 8266ADS/pq2fads board
We have a PCI interrupt mux in a fpga.
We have a disk controller and a pci bridge on the primary side, and four
TI dsp's on the sec
Hi Jon,
>>> The following series implements standard linux module aliasing for i2c
>>> modules on arch=powerpc. It then converts the mpc i2c driver from being a
>>> platform driver to an open firmware one. I2C device names are picked up
>>> from the device tree. Module aliasing is used to trans
On Fri, 2008-01-11 at 09:48 -0800, Eugene Surovegin wrote:
> On Sat, Jan 05, 2008 at 01:38:17PM +0100, Stefan Roese wrote:
> > On Saturday 05 January 2008, Benjamin Herrenschmidt wrote:
> > > On Sat, 2008-01-05 at 10:50 +0100, Stefan Roese wrote:
> > > > Performance tests done by AMCC have shown t
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
drivers/mtd/Kconfig|8
drivers/mtd/Makefile |1 +
drivers/mtd/maps/physmap_of.c | 89
drivers/mtd/ofpart.c | 70 +++
include/linu
Signed-off-by: Nick Spence <[EMAIL PROTECTED]>
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
drivers/mtd/nand/Kconfig |9 +
drivers/mtd/nand/Makefile|1 +
drivers/mtd/nand/fsl_elbc_nand.c | 1243 ++
3 files changed, 1253 insertions(+)
Josh Boyer wrote:
> On Fri, 11 Jan 2008 01:15:48 -0500
> Sean MacLennan <[EMAIL PROTECTED]> wrote:
> This looks pretty darn good, minus the missing GPIO node (see comment
> in patch 1).
>
Thanks. I have added the gpio and tested it.
Cheers,
Sean
Signed-off-by: Sean MacLennan <[EMAIL PROTECT
> > The s/w synchronization algorithms proposed in my patches has no LL PLB
> > limitations as opposed to h/w snooping, but, probably, this is not the best
> > way of how it might be implemented. Even though with these patches the h/w
> > accelerated RAID starts to operate correctly (with L2-c
On Sat, Jan 12, 2008 at 09:05:35AM +1100, Benjamin Herrenschmidt wrote:
>
> > > The s/w synchronization algorithms proposed in my patches has no LL PLB
> > > limitations as opposed to h/w snooping, but, probably, this is not the
> > > best
> > > way of how it might be implemented. Even though
Josh Boyer wrote:
>> +if (gpio_base == NULL) {
>> +printk("ERROR: Unable to remap GPIO base.\n");
>> +return;
>> +}
>> +}
>> +
>> +leds = readl(gpio_base + 0x100);
>>
>
> Do you really want readl here? That will byte-swap
On Fri, 2008-01-11 at 10:38 -0600, Kumar Gala wrote:
> Ben,
>
> Will this impact the apple fix? I'm getting some _IO cases hitting this.
No, your fix is right, it's a bug to compare against pci_mem_offset and
not check if it's a memory resource in the first place. I would suggest
that you do th
Folks,
Anyone out there with an 8241 board such as
the IoMega StorCenter who would be willing to
help me debug my arch/powerpc cuImage problems?
I feel like I am missing something very basic in
my port... like, "Did you map this memory right?"
or "Did you set _this_ magic bit?"
I have posted the
On 1/11/08, Jon Loeliger <[EMAIL PROTECTED]> wrote:
> Folks,
>
> Anyone out there with an 8241 board such as
> the IoMega StorCenter who would be willing to
> help me debug my arch/powerpc cuImage problems?
>
> I feel like I am missing something very basic in
> my port... like, "Did you map this me
Hi All,
Is there any BSP on Linux Kernel 2.4 support Quick Engine of MPC8568?
If not, which BSP shall I start the porting? The BSP(on Kernel2.6) of
MPC8568MDS from Freescale supports CPM2, but not QE. What the
difference between CPM2 and QE?
Thanks,
___
So, like, the other day "Grant Likely" mumbled:
>
> Since you're getting absolutely no output after uncompression it
> probably means that you're failing in the boot wrapper...
Or not getting to the boot wrapper...
> which means mmu is off, and the serial port is already set up by u-boot.
>
> Yo
On 1/11/08, Jon Loeliger <[EMAIL PROTECTED]> wrote:
> So, like, the other day "Grant Likely" mumbled:
> >
> > Since you're getting absolutely no output after uncompression it
> > probably means that you're failing in the boot wrapper...
>
> Or not getting to the boot wrapper...
Hmm, yet it boots a
Linus,
Please do
git pull \
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git merge
to get two more bug fixes for powerpc, as listed below.
Thanks,
Paul.
arch/powerpc/kernel/prom_init.c | 39 ++
arch/powerpc/mm/slb.c
On Fri, 2008-01-11 at 14:38 -0800, Eugene Surovegin wrote:
> On Sat, Jan 12, 2008 at 09:05:35AM +1100, Benjamin Herrenschmidt wrote:
> >
> > > > The s/w synchronization algorithms proposed in my patches has no LL
> > > > PLB
> > > > limitations as opposed to h/w snooping, but, probably, this i
Hi Sean,
On Fri, 11 Jan 2008 18:39:15 -0500 Sean MacLennan <[EMAIL PROTECTED]> wrote:
>
> +++ arch/powerpc/platforms/44x/warp-nand.c2008-01-11 18:04:10.0
> -0500
> @@ -0,0 +1,85 @@
You need a copyright/license notice.
The only other concern I have left is the extern in the C file, b
This patch modifies the ds1307, ds1374, and rs5c372 i2c drivers to support
device tree names using the new i2c mod alias support
Signed-off-by: Jon Smirl <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/fsl_soc.c | 44 -
drivers/rtc/rtc-ds1307.c | 18 +
Return errors that were being ignored in the mpc-i2c driver
Signed-off-by: Jon Smirl <[EMAIL PROTECTED]>
---
drivers/i2c/busses/i2c-mpc.c | 30 +-
1 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c
Convert MPC i2c driver from being a platform_driver to an open firmware
version. Error returns were improved. Routine names were changed from fsl_ to
mpc_ to make them match the file name.
Signed-off-by: Jon Smirl <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/fsl_soc.c | 96 ---
This patch allows new style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). I've
tested it on PowerPC and x86. This change is required for PowerPC
device tree support.
Signed-off-by: Jon Smirl <[EMAIL PROTECTED]>
---
drivers/hwmon/f75375s
Updated to reflect comments in:
http://lkml.org/lkml/2008/1/11/272
Since copying i2c-mpc.c to maintain support for the ppc architecture seems to
be an issue; instead rework i2c-mpc.c to use CONFIG_PPC_MERGE #ifdefs to
support both the ppc and powerpc architecture. When ppc is deleted in six
mon
Convert pfc8563 i2c driver from old style to new style. The
driver is also modified to support device tree names via the
i2c mod alias mechanism.
Signed-off-by: Jon Smirl <[EMAIL PROTECTED]>
---
drivers/rtc/rtc-pcf8563.c | 107 +++--
1 files changed, 27 i
On Fri, Jan 11, 2008 at 12:17:41PM -0600, Rune Torgersen wrote:
> PCI_INT: [EMAIL PROTECTED],10 {
> #interrupt-cells = <1>;
> interrupt-controller;
> reg = <5 10 4>; //
> Chip select, offset,
On Sat, Jan 12, 2008 at 01:40:05PM +1100, Stephen Rothwell wrote:
> Hi Sean,
>
> On Fri, 11 Jan 2008 18:39:15 -0500 Sean MacLennan <[EMAIL PROTECTED]> wrote:
> >
> > +++ arch/powerpc/platforms/44x/warp-nand.c 2008-01-11 18:04:10.0
> > -0500
> > @@ -0,0 +1,85 @@
>
> You need a copyright/
Stephen Rothwell wrote:
> Hi Sean,
>
> On Fri, 11 Jan 2008 18:39:15 -0500 Sean MacLennan <[EMAIL PROTECTED]> wrote:
>
>> +++ arch/powerpc/platforms/44x/warp-nand.c 2008-01-11 18:04:10.0
>> -0500
>> @@ -0,0 +1,85 @@
>>
>
> You need a copyright/license notice.
>
> The only other co
Olof Johansson wrote:
> On Sat, Jan 12, 2008 at 01:40:05PM +1100, Stephen Rothwell wrote:
>
>> Hi Sean,
>>
>> On Fri, 11 Jan 2008 18:39:15 -0500 Sean MacLennan <[EMAIL PROTECTED]> wrote:
>>
>>> +++ arch/powerpc/platforms/44x/warp-nand.c 2008-01-11 18:04:10.0
>>> -0500
>>> @@ -0,0
Signed-off-by: Sean MacLennan <[EMAIL PROTECTED]>
---
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 66a3d8c..b3e4c35 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -469,7 +469,7 @@ config MCA
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_
Comment was wrong, I2C_OF_MODULE_PREFIX was needed. Add it back.
Implement module aliasing for i2c to translate from device tree names
This patch allows new style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). I've
tested it on PowerPC an
On Fri, Jan 11, 2008 at 09:55:54PM -0500, Sean MacLennan wrote:
> I guess this implies I don't need the GPL blurb. I noticed that the
> blurb I have used mentions GPL2 or later and I know Linus doesn't like GPL3.
You don't need it but people tend to include it by habit.
The two versions are esse
Hi Jon,
On Fri, 11 Jan 2008 22:00:42 -0500 "Jon Smirl" <[EMAIL PROTECTED]> wrote:
>
> +++ b/drivers/hwmon/f75375s.c
> @@ -117,7 +117,7 @@ struct f75375_data {
> static int f75375_attach_adapter(struct i2c_adapter *adapter);
> static int f75375_detect(struct i2c_adapter *adapter, int address, int
Hi Jon,
On Fri, 11 Jan 2008 21:47:46 -0500 Jon Smirl <[EMAIL PROTECTED]> wrote:
>
> +++ b/drivers/i2c/busses/i2c-mpc.c
> +static void of_register_i2c_devices(struct i2c_adapter *adap, struct
> device_node *adap_node)
> +{
> + struct device_node *node = NULL;
> +
> + while ((node = of_get
>From: Scott Wood
>Sent: Fri 1/11/2008 1:02 PM
>To: Rune Torgersen
>Cc: linuxppc-dev@ozlabs.org
>Subject: Re: Device Tree & PCI
>
>On Fri, Jan 11, 2008 at 12:17:41PM -0600, Rune Torgersen wrote:
>> PCI_INT: [EMAIL PROTECTED],10 {
>> #interrupt-cells = <1>;
>>
On Saturday 12 January 2008, Sean MacLennan wrote:
> +++ arch/powerpc/boot/dts/warp.dts2008-01-11 15:58:03.0 -0500
> @@ -0,0 +1,234 @@
> +/*
> + * Device Tree Source for PIKA Warp
> + *
> + * Copyright (c) 2008 PIKA Technologies
> + * Sean MacLennan <[EMAIL PROTECTED]>
> + *
> + * Thi
On Saturday 12 January 2008, Sean MacLennan wrote:
> Josh Boyer wrote:
> >> + if (gpio_base == NULL) {
> >> + printk("ERROR: Unable to remap GPIO base.\n");
> >> + return;
> >> + }
> >> + }
> >> +
> >> + leds = readl(gpio_base + 0x100);
> >
> >
Stefan Roese wrote:
> On Saturday 12 January 2008, Sean MacLennan wrote:
>
>> Josh Boyer wrote:
>>
+ if (gpio_base == NULL) {
+ printk("ERROR: Unable to remap GPIO base.\n");
+ return;
+ }
+ }
+
+ leds
On Friday 11 January 2008, Benjamin Herrenschmidt wrote:
> On Fri, 2008-01-11 at 09:48 -0800, Eugene Surovegin wrote:
> > On Sat, Jan 05, 2008 at 01:38:17PM +0100, Stefan Roese wrote:
> > > On Saturday 05 January 2008, Benjamin Herrenschmidt wrote:
> > > > On Sat, 2008-01-05 at 10:50 +0100, Stefan
On Fri, Jan 11, 2008 at 02:27:16PM -0600, Kumar Gala wrote:
>>> I'm getting the following message from the kernel on an embedded ppc32
>>> system:
>>>
>>> PCI: Failed to allocate mem resource #9:[EMAIL PROTECTED] for :00:00.0
>>>
>>> The HW setup is a PCIe host controller and an e1000 NIC card.
On Sat, 2008-01-12 at 08:26 +0100, Stefan Roese wrote:
>
> We shouldn't make it too complicated. We can always select different
> settings
> in the defconfig file. My thinking here is to better wast a little
> memory
> with a potential performance improvement. Just me 0.02$
If it gets really c
86 matches
Mail list logo
