Hi
The device tree format has changed from linux-2.6.24. You need to port the
U-Boot to the latest version. Even I faced the same issue.
Regards
Ratheesh
On Thu, Jan 22, 2009 at 11:30 PM, Scott Wood wrote:
> On Thu, Jan 22, 2009 at 12:45:22PM -0500, Haiying Wang wrote:
> > On Thu, 2009-01-22 at
On Thu, Jan 22, 2009 at 12:45:22PM -0500, Haiying Wang wrote:
> On Thu, 2009-01-22 at 06:37 -0800, wael showair wrote:
>
> > m...@24520 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > device_type = "mdio";
> >
On Thu, 2009-01-22 at 06:37 -0800, wael showair wrote:
> m...@24520 {
> #address-cells = <1>;
> #size-cells = <0>;
> device_type = "mdio";
> compatible = "gianfar";
> reg = <
30 1
>;
interrupt-parent = <4>;
};
};
};
*
Heiko Schocher wrote:
>
> Hello wael,
>
> wael showair wrote:
On Wed, Jan 21, 2009 at 11:37 AM, wael showair wrote:
>
> Hi All,
> i have a board with MPC8555 processor
> uboot version 1.1.6
> linux kernel 2.6.19-rc5
> ltib version: 6.2.2-sv
> gcc 3.4.3
>
> it boots successfully
> i want to upgrade my linux kernel to 2.6.27
> i upgraded the following:
> ltib
Heiko Schocher wrote:
Hello wael,
wael showair wrote:
i have a board with MPC8555 processor
uboot version 1.1.6
linux kernel 2.6.19-rc5
ltib version: 6.2.2-sv
gcc 3.4.3
it boots successfully
i want to upgrade my linux kernel to 2.6.27
i upgraded the following:
ltib version 8.1.2-sv
gcc 4.
t; RPC: Registered tcp transport module.
> 24520:10 not found
> eth0: Could not attach to PHY
Here is your problem. For some reason, your network driver
couldnt find the PHY ... Maybe there is something changed
between 2.6.19-rc5 and 2.6.27.
> IP-Config: Failed to open eth0
> IP-Confi
e
i2c /dev entries driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
24520:10 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0
IP-Config: Failed to open eth1
IP-Config: No network devices
