On Tue, Mar 17, 2009 at 12:52:52PM -0400, Mark Bishop wrote:
> Quoting Vijay Nikam :
>
>> Hi Mark,
>>
>> Could you please let me know how you booted the latest Linux kernel on
>> MPC8313ERDB board ? ? ? As I tried but was not successful. It hangs or
>> does nothing and waits at network configuratio
Quoting Vijay Nikam :
Hi Mark,
Could you please let me know how you booted the latest Linux kernel on
MPC8313ERDB board ? ? ? As I tried but was not successful. It hangs or
does nothing and waits at network configuration, mean to determine IP
address (as I have used dhcp).
Kindly please acknow
Hi Mark,
Could you please let me know how you booted the latest Linux kernel on
MPC8313ERDB board ? ? ? As I tried but was not successful. It hangs or
does nothing and waits at network configuration, mean to determine IP
address (as I have used dhcp).
Kindly please acknowledge ... thank you ...
Quoting Scott Wood :
On Wed, Mar 11, 2009 at 12:03:00PM -0400, Mark Bishop wrote:
Yes I have actually. I have booted a 2.6.28.6. Same problem.
I've booted many recent kernels on revA 8313ERDB; networking works fine.
I'll try 2.6.28.6 specifically, though u-boot is acting up at the moment
so
On Wed, Mar 11, 2009 at 12:03:00PM -0400, Mark Bishop wrote:
> Yes I have actually. I have booted a 2.6.28.6. Same problem.
I've booted many recent kernels on revA 8313ERDB; networking works fine.
I'll try 2.6.28.6 specifically, though u-boot is acting up at the moment
so I have to address that
Yes I have actually. I have booted a 2.6.28.6. Same problem.
Also, is it me but at some point from 2.6.23 to 2.6.28 did they
started using hex numbers in the .dts file for "interrupts = " without
the 0x preamble?
I've been looking at 2.6.20, 2.6.23, and 2.6.28 .dts files for this
board
On Mar 11, 2009, at 10:52 AM, Mark Bishop wrote:
Has anyone been able to get a newer Freescale BSP to work with a
RevA (processor version 1.0) RDB?
The boards we received didn't have SPI compiled into the kernel and
when we went to go re-compile the kernel using the 20081222 and
20080711
Has anyone been able to get a newer Freescale BSP to work with a RevA
(processor version 1.0) RDB?
The boards we received didn't have SPI compiled into the kernel and
when we went to go re-compile the kernel using the 20081222 and
20080711 BSPs. I realize that the interrupts were reversed
