On Tue, 2014-12-02 at 15:55 +0100, Alessio Igor Bogani wrote:
> Hi Scott,
>
> On 2 December 2014 at 06:03, Scott Wood wrote:
> [...]
> >> The pq3-gpio-0.dtsi defines an gpio controller in this way:
> >>
> >> gpio-controller@f000 {
> >> reg = <0xf000 0x100>;
> >> [...]
> >>
> >> But MVME
Hi Scott,
On 2 December 2014 at 06:03, Scott Wood wrote:
[...]
> I was referring to the final ranges entry:
>
>> + 0x5 0x0 0x0 0xffdf 0x1000>;
>
> The localbus ranges should reflect what was programmed into BRn/ORn.
> The smallest size that can be programmed into O
On Thu, 2014-11-27 at 15:28 +0100, Alessio Igor Bogani wrote:
> Scott,
>
> On 26 November 2014 at 23:21, Scott Wood wrote:
> > On Wed, 2014-11-26 at 15:17 +0100, Alessio Igor Bogani wrote:
> >> + lbc: localbus@ffe05000 {
> >> + reg = <0 0xffe05000 0 0x1000>;
> >> +
> >
> > It's no
Scott,
On 26 November 2014 at 23:21, Scott Wood wrote:
> On Wed, 2014-11-26 at 15:17 +0100, Alessio Igor Bogani wrote:
>> + board_soc: soc: soc@ffe0 {
>
> There's no need for two labels on the same node.
I'll remove board_soc label.
[...]
>> + eeprom-vpd@54 {
>> +
On Wed, 2014-11-26 at 15:17 +0100, Alessio Igor Bogani wrote:
> + board_soc: soc: soc@ffe0 {
There's no need for two labels on the same node.
> + ranges = <0x0 0 0xffe0 0x10>;
> +
> + i2c@3000 {
> + hwmon@4c {
> +
Add support for the Artesyn MVME2500 Single Board Computer.
The MVME2500 is a 6U form factor VME64 computer with:
- A single Freescale QorIQ P2010 CPU
- 1 GB of DDR3 onboard memory
- Three Gigabit Ethernets
- Five 16550 compatible UARTS
- One USB 2.0 port,
