R: usb/eth DTS nodes for custom board based on mpc5200

Hi Grant we have already tested what you are suggesting, but nothing happens. I'm supposing the problem comes from interrupts. In fact USB is still alive, every 5 sec. we can see some timeout messages. (from previous post) [EMAIL PROTECTED]: ~ #[ 24.027842] usb 1-2: khubd timed out on ep0in

R: R: USB on lite5200 does not work.

Hi Grant&Wolfgang thanks for yours posts. You are right about WR. For lite5200 only few patchs have been used. Most of the job is for support other boards or to introduce some patchs for its debug system. The main HW difference between our board and lite5200 is: console on PSC3 and port_config

USB on lite5200 does not work.

Hi folks I've got a "little" problem with USB using a board based on lite5200. Some infos: -uBoot 1.2.0 -Linux version 2.6.21.7-hrt1-WR2.0bl_standard -time_init: processor frequency = 396.00 MHz We are using a minimal rootfs in order to jump on the real rootfs. We reach the shell using th

PSC-SPI and MMC-SPI driver on lite5200b EVB. Device registration problems.

Hi guys I'm using a lite5200b EVB (u-boot 1.2, kernel 2.6.26.3), using the psc-spi driver and the mmc-spi driver. I've modified the lite5200b.dts file, I'd have SPI on PSC6 and mmc_spi connected to SPI on PSC6 first I've commented // [EMAIL PROTECTED] { // c