Hi,
Two SATA device nodes in bluestone.dts uses the same structure as SATA node
in the canyonlands.dts. All boards having SATA DWC currently use this
structure. So, changing it will need to change all corresponding device
tree. The current sata_dwc_460ex.c agrees with this structure.
I want to giv
Hi all,
On Fri, 13 Apr 2012 12:30:11 +1000 Michael Neuling wrote:
>
> I managed to bisect this down using pseries_defconfig with next-20120412
> to this patch:
>
> commit 85bbc003b24335e253a392f6a9874103b77abb36
> Author: Jiri Slaby
> Date: Mon Apr 2 13:54:22 2012
0 ]---
>
> This did not happen yesterday. Just wondering if anyone can think of
> anything obvious. Full console log at
> http://ozlabs.org/~sfr/next-20120411.log.bz2
I managed to bisect this down using pseries_defconfig with next-20120412
to this patch:
commit 85bbc003b24335e253
Hi,
> I just hit this on mainline from today (3.4.0-rc2-00065-gf549e08).
> Haven't had a chance to narrow it down yet.
Looking closer, it was caused by an EEH error at boot. It looks like
the Mellanox infiniband card gets an error when probed by their
firmware tool (mstmread), but only if the ke
Hi
I'm so sorry, but there is a better way than this way with
pcibios_enable_device() for issue.
I will write another code soon, so please wait.
Regards.
Hiroo MATSUMOTO
> Hi
>
>
> I'm trying to use PCI Express Hot Plug on powerpc platform.
> But PCI driver returns error when hotplug.
> Err
Hi Gavin,
> This series of patches is going to reorganize EEH so that it could
> support multiple platforms in future. The requirements were raised
> from the aspects.
I just hit this on mainline from today (3.4.0-rc2-00065-gf549e08).
Haven't had a chance to narrow it down yet.
Oops: Kernel acc
On 04/03/2012 07:56 AM, Sergei Shtylyov wrote:
Hello.
On 03-04-2012 14:12, Thang Q. Nguyen wrote:
Signed-off-by: Thang Q. Nguyen
---
Changes for v2:
- Use git rename feature to change the driver to the newname and for
easier review.
arch/powerpc/boot/dts/bluestone.dts | 21 +
drivers/ata/Mak
These routines add support for AES in CCM mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-aes-ccm.c | 465
1 files changed, 465 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
This patch series adds support for a new device type, the Platform
Facilities Option (PFO). PFO resources are a set of accelerators that
share some system resources managed by the VIO bus. This patchset
includes the basic support for the devices in the VIO bus code along
with drivers for the rand
This patch adds the cas bits to advertise support for the Platform
Facilities Option (PFO) based encryption accelerator device. The nx
device driver provides support for this hardware feature.
Signed-off-by: Kent Yoder
---
arch/powerpc/kernel/prom_init.c |3 ++-
1 files changed, 2 insertions
These routines add debugfs files supporting the Power7+ in-Nest encryption
accelerator driver.
Signed-off-by: Kent Yoder
---
Documentation/ABI/testing/debugfs-pfo-nx-crypto | 45 ++
drivers/crypto/nx/nx_debugfs.c | 103 +++
2 files changed, 148 ins
These routines add support for SHA-512 hashing on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-sha512.c | 263 +
1 files changed, 263 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
These routines add support for SHA-256 hashing on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-sha256.c | 244 +
1 files changed, 244 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
These files support configuring and building the nx device driver.
Signed-off-by: Kent Yoder
---
arch/powerpc/Makefile |1 +
drivers/crypto/Kconfig | 17 +
drivers/crypto/nx/Makefile | 11 +++
3 files changed, 29 insertions(+), 0 deletions(-)
create mode
These routines add support for AES in XCBC mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-aes-xcbc.c | 234 +++
1 files changed, 234 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/
These routines add support for AES in GCM mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-aes-gcm.c | 353
1 files changed, 353 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
These routines add support for AES in CBC mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-aes-cbc.c | 140
1 files changed, 140 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
These routines add support for AES in ECB mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-aes-ecb.c | 138
1 files changed, 138 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
These routines add support for AES in CTR mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx-aes-ctr.c | 177
1 files changed, 177 insertions(+), 0 deletions(-)
create mode 100644 drivers/crypto/nx/n
These routines add the base device driver code supporting the Power7+
in-Nest encryption accelerator (nx) device.
Signed-off-by: Kent Yoder
---
drivers/crypto/nx/nx.c| 711 +
drivers/crypto/nx/nx.h| 192 +++
drivers/crypto/nx/nx_c
This patch adds the cas bits to advertise support for the Platform
Facilities Option (PFO) based random number generator accerator.
The pseries-rng driver provides support for this hardware feature.
Signed-off-by: Robert Jennings
Signed-off-by: Kent Yoder
---
arch/powerpc/kernel/prom_init.c |
Adds support for the Platform Facilities Option (PFO)-based hardware
random number generator for POWER hardware.
Signed-off-by: Michael Neuling
Signed-off-by: Robert Jennings
Signed-off-by: Kent Yoder
---
drivers/char/hw_random/Kconfig | 13 +
drivers/char/hw_random/Makefile |
This adds an update notifier mechanism for changes to properties in the
device tree. One use of this would be a device driver that needs to act
on changes to it's properties in the device tree after a live migration
or a dynamic activation that is triggered by updates to ofdt properties.
Signed-o
Add support for the Platform Facilities Option (PFO) to the VIO bus.
These devices have a separate root node in OpenFirmware which
requires additional parsing to map into the existing VIO device
structure fields. This adds the interface for PFO device drivers to
make synchronous hypervisor calls.
The Platform Facilities Option (PFO) adds several new h_calls and
more return codes.
Signed-off-by: Robert Jennings
Signed-off-by: Kent Yoder
---
arch/powerpc/include/asm/hvcall.h | 25 +++--
1 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/incl
Hi,
I've just tried to boot 2.6.32, 3.0 and mainline kernel on my mpc5200b
based board, on 3.0 and mainline resulting in
mpc52xx_irqhost_map: invalid irq: virq=16, l1=0, l2=3
The device tree is based on mpc5200b.dtsi, hence the invalid irq comes from
gpio_wkup: gpio@c00 {
...
inter
26 matches
Mail list logo
