System log shows a lot of "ehea: Error", see below, during system start up.
Not sure what it is. I'd like to understand this, could someone points me
the direction? My "Machine Type and Model ... ST9146802SS" reported from
lscfg (p6 blade). OS is RHEL 5.2. Kernel level is 2.6.18-92.1.10.el5.
2008/10/1, Mariusz Kozlowski <[EMAIL PROTECTED]>:
> Hello,
>
> I found that on my old iMac G3 aumix behaves weird on newer (up to
> 2.6.27-rc8) kernels. The sound is only present _when_ muted and is quiet
> I'd say 10% of 'normal' max level. If you turn the volume up - the box is
> silent.
>
Hi
I will soon submit a patch to add some support for a custom board.
I am a SW engineer at Netstal Maschinen in Switzerland. As I would like to get
out of the current proprietary OS we currently are using, I have been
following more or less closely the Linux kernel for quite a few years.
Durin
On Oct 3, 2008, at 4:57 PM, Timur Tabi wrote:
powerpc: fix conflict with Elo DMA driver in MPC8610 device tree
in my queue.
powerpc: remove CHRP and PMAC support from defconfigs, fix Kconfigs
For BenH to look at.
powerpc: remove support for bootmem-allocated memory for the DIU
driver
On Friday, October 3, 2008 2:52 pm Benjamin Herrenschmidt wrote:
> On Fri, 2008-10-03 at 08:59 -0700, Jesse Barnes wrote:
> > Feel free to change the generic code if it makes things easier for you,
> > the only limitation is that we have to live within the generic sysfs
> > read/write functions. O
On Fri, 2008-10-03 at 15:09 -0700, Jesse Barnes wrote:
> On Friday, October 3, 2008 2:52 pm Benjamin Herrenschmidt wrote:
> > On Fri, 2008-10-03 at 08:59 -0700, Jesse Barnes wrote:
> > > Feel free to change the generic code if it makes things easier for you,
> > > the only limitation is that we hav
On Oct 1, 2008, at 7:46 AM, Martyn Welch wrote:
Support for the SBC610 VPX Single Board Computer from GE Fanuc
(PowerPC
MPC8641D).
This patch adds support for the registers held in the devices main
FPGA,
exposing extra information about the revision of the board through
cpuinfo.
Signed
Kumar Gala wrote:
> applied
I have a few other patches that I've sent you over the past couple weeks that
you haven't applied:
powerpc: fix conflict with Elo DMA driver in MPC8610 device tree
powerpc: remove CHRP and PMAC support from defconfigs, fix Kconfigs
powerpc: remove support for bootmem-
On Oct 3, 2008, at 2:40 PM, Anton Vorontsov wrote:
Specifying user-selectable option in the qe_lib/Kconfig was a bad idea
because the qe_lib/Kconfig is included into the top level Kconfig, and
thus the QE_GPIO option appears at the top level menu.
This patch effectively moves the QE_GPIO optio
On Oct 3, 2008, at 11:14 AM, Timur Tabi wrote:
Modify the Kconfig so that Freescale QUICC Engine (QE) support is a
selectable
option, thereby allowing users to compile kernels without any QE
support.
The drawback is that QE support is now disabled by default on
platforms that
have a QE,
On Oct 1, 2008, at 3:32 AM, Martyn Welch wrote:
Support for the SBC610 VPX Single Board Computer from GE Fanuc
(PowerPC MPC8641D).
A number of MPC8641D based route interrupts for on-board interrupts
through
a FPGA based interrupt controller, which is chained with the
MPC8641D's mpic. This
On Fri, 2008-10-03 at 08:59 -0700, Jesse Barnes wrote:
>
> Feel free to change the generic code if it makes things easier for you, the
> only limitation is that we have to live within the generic sysfs read/write
> functions. Obviously I didn't worry about it when doing this code on ia64...
I
On Thu, Oct 02, 2008 at 12:15 +0200, Lennert Buytenhek wrote:
> Hi *,
>
> You're listed as maintainer of one of the network drivers in the tree
> that use phylib. Available at the URL below is a change to the phylib
> API (dynamic allocation of struct mii_bus, which is needed for hooking
> up mdi
Specifying user-selectable option in the qe_lib/Kconfig was a bad idea
because the qe_lib/Kconfig is included into the top level Kconfig, and
thus the QE_GPIO option appears at the top level menu.
This patch effectively moves the QE_GPIO option under the platform menu
instead.
Signed-off-by: Anto
> I didn't have a chance to test that I didn't break ia64, so I would
> be if somebody could give it a spin there ! Thanks !
All my ia64 config variations still build cleanly with
these two patches applied. I booted a couple of systems
too with no obvious ill-effects.
I have the same set of "leg
On Oct 3, 2008, at 11:27 AM, Anton Vorontsov wrote:
On Fri, Oct 03, 2008 at 11:14:18AM -0500, Kumar Gala wrote:
On Oct 3, 2008, at 11:08 AM, Anton Vorontsov wrote:
In the standalone setup the board's CPLD disables the PCI internal
arbiter, thus any access to the PCI bus will hang the board.
I think arch/powerpc/sysdev/qe_lib/Kconfig inclusion should be fixed.
How about this patch? Or we can move QUICC_ENGINE into the
qe_lib/Kconfig and include it in the platform/Kconfig... either
way would work.
Thanks for noticing.
I want to leave the "hidden" options in qe_lib/Kconfig.. just mo
Hi,
I am not able to boot my Power5 box with 2.6.27-rc8 (defconfig).
However, I am able to boot with my own custom config.
Known issue ?
Thanks,
Badari
boot: 2627rc8
Please wait, loading kernel...
Elf32 kernel loaded...
zImage starting: loaded at 0x040001fc (sp: 0x019ffa80)
Allocating 0xa
On Fri, Oct 3, 2008 at 11:23 AM, Anton Vorontsov
<[EMAIL PROTECTED]> wrote:
> How about this patch? Or we can move QUICC_ENGINE into the
> qe_lib/Kconfig and include it in the platform/Kconfig... either
> way would work.
>
> Thanks for noticing.
>
> arch/powerpc/Kconfig |2 --
>
> Patch against http://www.jdl.com/software/dtc.git
> Signed-off-by: Niklaus Giger <[EMAIL PROTECTED]>
> ---
> Documentation/manual.txt | 20
> Makefile |1 +
> 2 files changed, 21 insertions(+), 0 deletions(-)
Applied.
Thanks,
jdl
_
On Wed, 2008-10-01 at 15:03 -0700, Remi Machet wrote:
> This patch replaces the global APIs __dma_sync and __dma_sync_page
> with a new dma_mapping_ops API named sync_page. This is necessary to make
> sure that the proper synchronization mechanism is used for a device
> DMA depending on the bus the
On Fri, Oct 03, 2008 at 11:14:18AM -0500, Kumar Gala wrote:
>
> On Oct 3, 2008, at 11:08 AM, Anton Vorontsov wrote:
>
>> In the standalone setup the board's CPLD disables the PCI internal
>> arbiter, thus any access to the PCI bus will hang the board.
>>
>> When there is no PCI arbiter on the bus t
Otherwise user-selectable options appears at the top level.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
On Fri, Oct 03, 2008 at 11:09:09AM -0500, Timur Tabi wrote:
> Anton Vorontsov wrote:
>
> > Yup. David said that platform GPIO controllers should not go into the
> > drivers/gpio/, t
On Oct 3, 2008, at 11:09 AM, Timur Tabi wrote:
Anton Vorontsov wrote:
Yup. David said that platform GPIO controllers should not go into the
drivers/gpio/, their place is in the arch/.
Then when I do "make menuconfig", why doesn't that option appear
under "Platform
support"? This is what
Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable
option, thereby allowing users to compile kernels without any QE support.
The drawback is that QE support is now disabled by default on platforms that
have a QE, and so a defconfig is needed to enable QE and QE devices
On Oct 3, 2008, at 11:08 AM, Anton Vorontsov wrote:
In the standalone setup the board's CPLD disables the PCI internal
arbiter, thus any access to the PCI bus will hang the board.
When there is no PCI arbiter on the bus the u-boot adds
status = "broken (no arbiter)" property into the PCI contr
Anton Vorontsov wrote:
> Yup. David said that platform GPIO controllers should not go into the
> drivers/gpio/, their place is in the arch/.
Then when I do "make menuconfig", why doesn't that option appear under "Platform
support"? This is what I see now:
[*] Networking support --->
Device
In the standalone setup the board's CPLD disables the PCI internal
arbiter, thus any access to the PCI bus will hang the board.
When there is no PCI arbiter on the bus the u-boot adds
status = "broken (no arbiter)" property into the PCI controller's
node, and so marks the PCI controller as unavail
On Friday, October 3, 2008 2:49 am Benjamin Herrenschmidt wrote:
> + /* WARNING: The generic code is idiotic. It gets passed a pointer
> + * to what can be a 1, 2 or 4 byte quantity and always reads that
> + * as a u32, which means that we have to correct the location of
> + * th
On Fri, Oct 03, 2008 at 10:43:50AM -0500, Timur Tabi wrote:
> Anton Vorontsov wrote:
>
> > Btw, as for the need.. yes, it was needed to support the FHCI. But
> > now the FHCI would just depend on it, which is better approach anyway.
>
> I also noticed that "QE GPIO support" is a top-level Kconfig
On Friday, October 3, 2008 2:49 am Benjamin Herrenschmidt wrote:
> This adds the ability to mmap legacy IO space to the legacy_io files
> in sysfs on platforms that support it. This will allow to clean up
> X to use this instead of /dev/mem for legacy IO accesses such as
> those performed by Int10.
Anton Vorontsov wrote:
> Btw, as for the need.. yes, it was needed to support the FHCI. But
> now the FHCI would just depend on it, which is better approach anyway.
I also noticed that "QE GPIO support" is a top-level Kconfig option, instead of
under Device Drivers -> GPIO. Is that intentional?
Hi Ben,
Here's the pull request for my current set of patches. I might have a
few more later, but lets get these in now.
josh
The following changes since commit 1afb7f809bfb8fad9eec9419f3dfd75cee746ebd:
Paul Mackerras (1):
Merge branch 'powerpc-next' of master.kernel.org:/.../galak/po
On Fri, Oct 03, 2008 at 10:18:06PM +1000, Benjamin Herrenschmidt wrote:
>On Fri, 2008-10-03 at 08:04 -0400, Josh Boyer wrote:
>> On Fri, Oct 03, 2008 at 07:33:20PM +1000, Benjamin Herrenschmidt wrote:
>> >A typo in the new ppc4xx_simple.c prevents proper detection of
>> >the AMCC Canyonland board.
On Fri, Oct 03, 2008 at 10:07:19AM +1000, Benjamin Herrenschmidt wrote:
>Index: linux-work/arch/powerpc/boot/dts/iss4xx.dts
>===
>--- /dev/null 1970-01-01 00:00:00.0 +
>+++ linux-work/arch/powerpc/boot/dts/iss4xx.dts
On Fri, 2008-10-03 at 08:03 -0400, Josh Boyer wrote:
> On Fri, Oct 03, 2008 at 10:08:42AM +1000, Benjamin Herrenschmidt wrote:
> >+static void iss_blk_setup(struct iss_blk *ib)
> >+{
> >+unsigned long flags;
> >+u32 stat;
> >+
> >+pr_debug("iss_blk_setup %d\n", ib->devno);
> >+
> >+
On Fri, 2008-10-03 at 08:04 -0400, Josh Boyer wrote:
> On Fri, Oct 03, 2008 at 07:33:20PM +1000, Benjamin Herrenschmidt wrote:
> >A typo in the new ppc4xx_simple.c prevents proper detection of
> >the AMCC Canyonland board.
> >
> >Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
>
> This i
On Fri, Oct 03, 2008 at 07:33:20PM +1000, Benjamin Herrenschmidt wrote:
>A typo in the new ppc4xx_simple.c prevents proper detection of
>the AMCC Canyonland board.
>
>Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
This is already fixed in my 'next' branch.
josh
On Fri, Oct 03, 2008 at 10:08:42AM +1000, Benjamin Herrenschmidt wrote:
>+static void iss_blk_setup(struct iss_blk *ib)
>+{
>+ unsigned long flags;
>+ u32 stat;
>+
>+ pr_debug("iss_blk_setup %d\n", ib->devno);
>+
>+ spin_lock_irqsave(&iss_blk_reglock, flags);
>+ out_8(iss_b
On Friday 03 October 2008, Lennert Buytenhek wrote:
> On Fri, Oct 03, 2008 at 11:36:01AM +0200, Laurent Pinchart wrote:
>
> > Hi Lennert,
>
> Hi Laurent,
>
>
> > > You're listed as maintainer of one of the network drivers in the tree
> > > that use phylib. Available at the URL below is a chang
This patch adds support for legacy_io and legacy_mem files in
bus class directories in sysfs for powerpc
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
Unfortunately, I didn't have a chance to properly test it yet. I was
hoping to use an old VGA card to muck around with but the car
This adds the ability to mmap legacy IO space to the legacy_io files
in sysfs on platforms that support it. This will allow to clean up
X to use this instead of /dev/mem for legacy IO accesses such as
those performed by Int10.
While at it I moved pci_create/remove_legacy_files() to pci-sysfs.c
whe
On Fri, Oct 03, 2008 at 11:36:01AM +0200, Laurent Pinchart wrote:
> Hi Lennert,
Hi Laurent,
> > You're listed as maintainer of one of the network drivers in the tree
> > that use phylib. Available at the URL below is a change to the phylib
> > API (dynamic allocation of struct mii_bus, which i
Hi Lennert,
On Thursday 02 October 2008, Lennert Buytenhek wrote:
> Hi *,
>
> You're listed as maintainer of one of the network drivers in the tree
> that use phylib. Available at the URL below is a change to the phylib
> API (dynamic allocation of struct mii_bus, which is needed for hooking
> u
A typo in the new ppc4xx_simple.c prevents proper detection of
the AMCC Canyonland board.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/44x/ppc44x_simple.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-work.orig/arch/powerpc/platforms/
On Fri, 2008-10-03 at 04:35 -0400, Christoph Hellwig wrote:
> On Fri, Oct 03, 2008 at 10:08:42AM +1000, Benjamin Herrenschmidt wrote:
> > The ISS simulator is a simple powerpc simulator used among other things
> > for hardware bringup. It implements a simple memory mapped block device
> > interface
On Fri, Oct 03, 2008 at 12:48:49PM +0400, Anton Vorontsov wrote:
> On Fri, Oct 03, 2008 at 02:58:57AM -0500, Kumar Gala wrote:
> >
> > On Oct 3, 2008, at 2:04 AM, Anton Vorontsov wrote:
> >
> >> On Thu, Oct 02, 2008 at 10:27:57AM -0500, Timur Tabi wrote:
> >>> Modify the Kconfig so that Freescale Q
On Fri, Oct 03, 2008 at 02:58:57AM -0500, Kumar Gala wrote:
>
> On Oct 3, 2008, at 2:04 AM, Anton Vorontsov wrote:
>
>> On Thu, Oct 02, 2008 at 10:27:57AM -0500, Timur Tabi wrote:
>>> Modify the Kconfig so that Freescale QUICC Engine (QE) support is a
>>> selectable
>>> option, thereby allowing u
On Fri, Oct 03, 2008 at 10:08:42AM +1000, Benjamin Herrenschmidt wrote:
> The ISS simulator is a simple powerpc simulator used among other things
> for hardware bringup. It implements a simple memory mapped block device
> interface.
>
> This is a simple block driver that attaches to it. Note that
On Oct 3, 2008, at 2:04 AM, Anton Vorontsov wrote:
On Thu, Oct 02, 2008 at 10:27:57AM -0500, Timur Tabi wrote:
Modify the Kconfig so that Freescale QUICC Engine (QE) support is a
selectable
option, thereby allowing users to compile kernels without any QE
support.
The drawback is that QE s
On Thu, Oct 02, 2008 at 10:27:57AM -0500, Timur Tabi wrote:
> Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable
> option, thereby allowing users to compile kernels without any QE support.
>
> The drawback is that QE support is now disabled by default on platforms that
51 matches
Mail list logo
