On Thu, Mar 29, 2018 at 08:39:37AM +0200, Teichmann, Martin wrote:
> This adds support for the Physik Instrumente E-870 PIShift Drive
> Electronics, a Piezo motor driver.
>
> Signed-off-by: Martin Teichmann
Now applied with an updated commit summary (prefix).
Thanks,
Johan
--
To unsubscribe fro
Not all chipidea users need EXTCON, so it's better to avoid
unconditionally select EXTCON, this could save us 2KB kernel Image size.
Signed-off-by: Jisheng Zhang
---
drivers/usb/chipidea/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipide
The following changes since commit 4a3928c6f8a53fa1aed28ccba227742486e8ddcb:
Linux 4.16-rc3 (2018-02-25 18:50:41 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
tags/usb-serial-4.17-rc1
for you to fetch changes up to 79a0b
On Wed, Mar 28, 2018 at 11:52:13PM +0200, Paul Kocialkowski wrote:
> This allows dual-role ports to be reported as having gadget mode by the
> musb_has_gadget helper. This is required to enable MUSB at all with MUSB
> glue layers that set the port mode to MUSB_PORT_MODE_DUAL_ROLE at init.
>
> Most
On Thu, Mar 29, 2018 at 11:10:41AM +0200, Johan Hovold wrote:
> The following changes since commit 4a3928c6f8a53fa1aed28ccba227742486e8ddcb:
>
> Linux 4.16-rc3 (2018-02-25 18:50:41 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/johan/us
From: Michael Trimarchi
evdo bit can be set or reset. We can not trust evdo bit
status after bootloader stage
Signed-off-by: Michael Trimarchi
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/usbmisc_imx.c | 20
1 file changed, 12 insertions(+), 8 deletions(-)
diff --g
From: Michael Trimarchi
The register write can be done outside the if and else condition
Signed-off-by: Michael Trimarchi
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/usbmisc_imx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c
From: Michael Trimarchi
The USB_PHY_CTRL_FUNC is used specific for OTG port as described
in user manual. EVDO need to be set only for index 0 that
correspond to OTG port
Signed-off-by: Michael Trimarchi
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/usbmisc_imx.c | 3 +++
1 file changed,
Hi Greg,
This series including the bug fix for imx53 and some cleanups.
Due to network problem during nxp and qualcomm merge, I can't
do ssh for kernel.org currently, I am sorry I can't upload my
code, then can't send pull request either. I hope ssh access
can be recovered soon. Thanks.
Michael T
From: Sebastian Reichel
Some trivial cleanups, that do not change functionality.
Signed-off-by: Sebastian Reichel
Signed-off-by: Peter Chen
---
drivers/usb/chipidea/ci_hdrc_imx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c
b/driver
From: Sebastian Reichel
Traditionally, PORTSC should be set before initializing ULPI phys. But
setting PORTSC before powering on the phy results in a kernel freeze
on imx53 based GE PPD. As a workaround this initializes the phy early
in the imx platform code and disables phy power management from
On Thu, Mar 29, 2018 at 05:52:44PM +0800, Peter Chen wrote:
> Hi Greg,
>
> This series including the bug fix for imx53 and some cleanups.
> Due to network problem during nxp and qualcomm merge, I can't
> do ssh for kernel.org currently, I am sorry I can't upload my
> code, then can't send pull req
On Thu, Mar 29, 2018 at 12:06:12AM +0800, Li Jun wrote:
> With that we can clear any pending events and the port is registered
> so driver can be ready to handle typec events once we request irq.
>
> Signed-off-by: Peter Chen
> Signed-off-by: Li Jun
These sign offs aren't clear.
Sign offs mean
Dear Greg, dear Johan, dear list,
I'm very sorry I was a bit quick in sending you a patch for the PI E-870
device, because it's actually wrong. Everything seemed to work fine, until I
realized that once in a while two characters were missing. Checking dmesg I
realized error messages had piled u
Hi,
On Thu, 2018-03-29 at 11:23 +0200, Maxime Ripard wrote:
> On Wed, Mar 28, 2018 at 11:52:13PM +0200, Paul Kocialkowski wrote:
> > This allows dual-role ports to be reported as having gadget mode by
> > the
> > musb_has_gadget helper. This is required to enable MUSB at all with
> > MUSB
> > glue
This reverts commit 79a0b33165d8d8ec0840fcfc74fd0a8f219abeee.
Turns out this is not an FTDI device after all.
Reported-by: Martin Teichmann
Cc: stable
Signed-off-by: Johan Hovold
---
Greg,
I included the stable tag above as the offending patch had it, but I
will try to remember to speak out
On Thu, Mar 29, 2018 at 01:49:02PM +0200, Teichmann, Martin wrote:
> Dear Greg, dear Johan, dear list,
>
> I'm very sorry I was a bit quick in sending you a patch for the PI
> E-870 device, because it's actually wrong. Everything seemed to work
> fine, until I realized that once in a while two cha
Hi,
On Thu, Mar 29, 2018 at 12:06:09AM +0800, Li Jun wrote:
> Add fwnode handle to get the fwnode so we can get typec configs
> it contains.
>
> Suggested-by: Heikki Krogerus
> Signed-off-by: Li Jun
> ---
> drivers/staging/typec/tcpci.c | 14 +++---
> drivers/usb/typec/tcpm.c | 1
Hi and sorry for the long time to the new answere.
I think meanwhile I've lost the trust in that I'm able to get this wakeup on
usb plugin running properly by myself.
And, of course, there was a lot of work besides that wakeup problem.
Meanwhile our board supplier classified our wish as a special
In DDMA mode required to enable BNA interrupt for
both directions.
Signed-off-by: Minas Harutyunyan
---
drivers/usb/dwc2/gadget.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6c32bf26e48e..c231321656f9 100644
-
This series fully update existing ISOC DDMA flow which initially based on
2 descriptor chains. Switching between desc chains performing based on BNA
interrupt. Because of BNA interrupt few packets can be lost.
1/3 patch unmask ISOC IN BNA interrupt only.
2/3 patch changing ISOC IN/OUT flow as desc
Changed existing two descriptor-chain flow to one chain.
In two-chain implementation BNA interrupt used for switching between
two chains. BNA interrupt asserted because of returning to
beginning of the chain based on L-bit of last descriptor.
Because of that we lose packets. This issue resolved b
Updated checking of chain full condition based on mult count.
For each packet in uframe (dpi) created new desc by
setting size of transfer to mps. Buffer addresses in descs
differ by mps in function dwc2_gadget_fill_isoc_desc().
In function dwc2_gadget_start_isoc_ddma() upadted loop
boundaries ac
From: Heinrich Schuchardt
musb->endpoints[] has array size MUSB_C_NUM_EPS.
We must check array bounds before accessing the array and not afterwards.
Signed-off-by: Heinrich Schuchardt
Signed-off-by: Bin Liu
---
drivers/usb/musb/musb_gadget_ep0.c | 14 +-
1 file changed, 9 insertio
Hi Greg,
Here is one musb patch for v4.17 rc, which fixes an improper array boundary
check. Please let me know if any change is needed.
regards,
-Bin.
---
Heinrich Schuchardt (1):
usb: musb: gadget: misplaced out of bounds check
drivers/usb/musb/musb_gadget_ep0.c | 14 +-
1 file
On Thu, Mar 29, 2018 at 10:48:28AM -0500, Bin Liu wrote:
> From: Heinrich Schuchardt
>
> musb->endpoints[] has array size MUSB_C_NUM_EPS.
> We must check array bounds before accessing the array and not afterwards.
>
> Signed-off-by: Heinrich Schuchardt
> Signed-off-by: Bin Liu
> ---
> drivers
On Thu, Mar 29, 2018 at 06:36:42PM +0200, Greg Kroah-Hartman wrote:
> On Thu, Mar 29, 2018 at 10:48:28AM -0500, Bin Liu wrote:
> > From: Heinrich Schuchardt
> >
> > musb->endpoints[] has array size MUSB_C_NUM_EPS.
> > We must check array bounds before accessing the array and not afterwards.
> >
Hi!
> > Does ofonod work for you? I could not get that one to work...
>
> Because it's looking for a Gobi modem but the MDM6600 isn't one and
> doesn't expose that layout (and doesn't really need to anyway). I
> don't think ofono has a generic QMI driver, so you'd either need to for
> ce it to u
Hi Li,
On 03/28/2018 06:06 PM, Li Jun wrote:
> Add bingdings supported by current typec driver, so user can pass
> all those properties via dt.
>
> Signed-off-by: Li Jun
> ---
> .../bindings/connector/usb-connector.txt | 39
> ++
> 1 file changed, 39 insertions(+)
Hi Li,
On 03/28/2018 06:06 PM, Li Jun wrote:
> In case of drp toggling, we may need set correct cc value for role control
> after attach as it may never been set.
>
> Signed-off-by: Li Jun
> ---
> drivers/usb/typec/tcpm.c | 5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb
On Thu, Mar 29, 2018 at 12:06:15AM +0800, Li Jun wrote:
> In case of drp toggling, we may need set correct cc value for role control
> after attach as it may never been set.
>
Isn't CC set by the lower level driver in this case ? In other words, is it ever
necessary to call back into the low leve
31 matches
Mail list logo
