Matthew Dharm wrote on 11/07/17 15:54:
What else is plugged in? The top line of the log snippet you sent
shows an error from a USB video device... I wonder if the error
occurred in a different part of the stack, and it just finally
bombs-out in usb-storage
Matt
On Mon, Jul 10, 2017 at 11
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by work
with const attribute_group. So mark the non-const structs as const.
File size before:
textdata bss dec hex filename
13275 928 1 14204377c drive
attribute_groups are not supposed to change at runtime. So mark the
non-const structs as const.
Arvind Yadav (10):
[PATCH v2 01/10] net: cdc_ncm: constify attribute_group structures.
[PATCH v2 02/10] net: can: at91_can: constify attribute_group structures.
[PATCH v2 03/10] net: can: janz-ica
Hi,
Minas Harutyunyan writes:
>>> Minas Harutyunyan writes:
USB CV driver stack doesn't perform USB RESET after device disconnect/
connect, so need to reset to zero DEVADDR field in DCFG to pass
enumeration again.
Signed-off-by: Minas Harutyunyan
---
drivers
Hi,
Minas Harutyunyan writes:
>> Minas Harutyunyan writes:
>>> USB CV driver stack doesn't perform USB RESET after device disconnect/
>>> connect, so need to reset to zero DEVADDR field in DCFG to pass
>>> enumeration again.
>>>
>>> Signed-off-by: Minas Harutyunyan
>>> ---
>>> drivers/usb/dwc
Am Montag, den 10.07.2017, 14:58 -0500 schrieb Gustavo A. R. Silva :
> Hi Oliver,
>
> Quoting Oliver Neukum :
>
> >
> > Am Sonntag, den 09.07.2017, 21:00 -0500 schrieb Gustavo A. R. Silva :
> > >
> > > Simplify return logic to avoid unnecessary variable assignment.
> > >
> > > This issue was
Am Montag, den 10.07.2017, 16:26 -0400 schrieb Alan Stern:
> On Mon, 10 Jul 2017, Oliver Neukum wrote:
>
> > > > The old storage driver unconditionally limits inquiries to 36 bytes.
> > > > UAS does not
> > > > have that limit. That seems to be a bit optimistic. Could you test the
> > > > attach
On Tue, Jul 11, 2017 at 03:30:58PM +0930, Arthur Marsh wrote:
> I've had several lock-ups on recent 4.12.0+ kernels that I've built.
Did older kernels work? Doing 'git bisect' would be great to track down
the problem.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe
Reseted DEVADDR field in DCFG to zero on USB RESET.
Device address in DCFG register does not reset to zero,
which required to pass enumeration, after disconnect and
reconnect.
Signed-off-by: Minas Harutyunyan
---
drivers/usb/dwc2/gadget.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/d
Hi Felipe,
On 7/11/2017 11:34 AM, Felipe Balbi wrote:
>
> Hi,
>
> Minas Harutyunyan writes:
>>> Minas Harutyunyan writes:
USB CV driver stack doesn't perform USB RESET after device disconnect/
connect, so need to reset to zero DEVADDR field in DCFG to pass
enumeration again.
Hello,
I have a new device in my possession that works with usbserial generic
driver.
In order for it to work I execute:
modprobe usbserial
echo fff0 0100 > /sys/bus/usb-serial/drivers/generic/new_id
I'm writing to you since dmesg reads:
[ 1674.626941] usbserial_generic 4-2:1.0: Generic devi
On Mon, 10 Jul 2017, Alan Robertson wrote:
> OK have now updated to kernel 4.9.36+, unfortunately g_mass_storage
> isn't working at all in that! apt-get upgrade gave me 4.9.35+ then
> rpi-update got me to 4.9.36+. Unfortunately getting a kernel panic on
> boot (even on fresh install) when g_mass
On Tue, 11 Jul 2017, Arthur Marsh wrote:
> I've had several lock-ups on recent 4.12.0+ kernels that I've built.
>
> The machine has an Asus M3A78 Pro motherboard and 4-core AMD CPU.
>
> The only usb-storage in use is an external Seagate HDD with one ntfs-3g
> filesystem and another ext3 filesys
> Den 8. jul. 2017 kl. 16.39 skrev Enrico Mioso :
>
> Some firmwares in Huawei E3372H devices have been observed to switch back
> to NTB 32-bit format after altsetting switch.
> This patch implements a driver flag to check for the device settings and
> set NTB format to 16-bit again if needed.
>
Some firmwares in Huawei E3372H devices have been observed to switch back
to NTB 32-bit format after altsetting switch.
This patch implements a driver flag to check for the device settings and
set NTB format to 16-bit again if needed.
The flag has been activated for devices controlled by the huawei
On Tue, Jul 11, 2017 at 2:42 PM, Alan Stern wrote:
> On Mon, 10 Jul 2017, Alan Robertson wrote:
>
>> OK have now updated to kernel 4.9.36+, unfortunately g_mass_storage
>> isn't working at all in that! apt-get upgrade gave me 4.9.35+ then
>> rpi-update got me to 4.9.36+. Unfortunately getting a
From: Arvind Yadav
Date: Tue, 11 Jul 2017 12:52:41 +0530
> attribute_groups are not supposed to change at runtime. So mark the
> non-const structs as const.
Please resubmit this when net-next is open again:
http://vger.kernel.org/~davem/net-next.html
Thank you.
--
To unsubscribe from t
Hi,
I've upgraded my Distro Ubuntu from 14.04 (Kernel 3.13.0) to 16.04
(Kernel 4.4.0).
Since the upgrade the battery indicator LEDs on my Logitech Performance MX Mouse
light up about every 60 seconds. Depending on the charging level 1, 2
or 3 LEDs light up green.
I've used the usbmon module to c
On Tue, 11 Jul 2017, Alan Robertson wrote:
> Hi Alan
>
> Yes, have read about that now and certainly external build would
> definitely be quicker.
>
> However - GREAT NEWS!!! The update to 4.9.36+ seems to have done the trick :)
>
> See new dmesg...
> [6.131569] 2098.usb supply vusb_d
On Tue, Jul 11, 2017 at 7:29 PM, Alan Stern wrote:
> On Tue, 11 Jul 2017, Alan Robertson wrote:
>
>> Hi Alan
>>
>> Yes, have read about that now and certainly external build would
>> definitely be quicker.
>>
>> However - GREAT NEWS!!! The update to 4.9.36+ seems to have done the trick
>> :)
>>
Am Dienstag, den 11.07.2017, 17:21 +0200 schrieb Enrico Mioso:
>
> Some firmwares in Huawei E3372H devices have been observed to switch back
> to NTB 32-bit format after altsetting switch.
> This patch implements a driver flag to check for the device settings and
> set NTB format to 16-bit again i
Oliver Neukum writes:
> Am Dienstag, den 11.07.2017, 17:21 +0200 schrieb Enrico Mioso:
>> Some firmwares in Huawei E3372H devices have been observed to switch back
>> to NTB 32-bit format after altsetting switch.
>> This patch implements a driver flag to check for the device settings and
>> set NT
On 6/29/2017 12:25 AM, Vignesh R wrote:
> commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to
> get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to
> dwc3_core_init() after dwc3_core_soft_reset(). But
> dwc3_core_soft_reset() calls phy_init(), therefore dwc3_
On the db410c 96boards platform we have a TC7USB40MU on the board
to mux the D+/D- lines coming from the controller between a micro
usb "device" port and a USB hub for "host" roles[1]. During a
role switch, we need to toggle this mux to forward the D+/D-
lines to either the port or the hub. Add the
We currently have three device nodes for the same USB hardware
block, as evident by the reuse of the same reg address multiple
times. Now that the chipidea driver fully supports OTG with the
MSM wrapper we can collapse all these nodes into one USB device
node, reflecting the true nature of the hard
This patchset adds support for the TC7USB40MU usb mux found on
db410c 96boards platforms via the new multiplexer framework and
hooks that into the chipidea driver. This allows us to properly
control host or device mode on this board via the sysfs knob.
So far I've only tested this on db410c, and
On the db410c 96boards platform we have a TC7USB40MU[1] on the
board to mux the D+/D- lines from the SoC between a micro usb
"device" port and a USB hub for "host" roles. Upon a role switch,
we need to change this mux to forward the D+/D- lines to either
the port or the hub. Introduce a driver for
The dwc3 could not release resources when the module is built-in
because this module does not have shutdown method. This causes the USB
3.0 hub is not able to detect after warm boot.
Original patch by Brian Kim, updated and submitted upstream by gustavo
panizzo.
Also see https://bugs.debian.org/8
On 2017-07-12 03:02, Stephen Boyd wrote:
> This patchset adds support for the TC7USB40MU usb mux found on
> db410c 96boards platforms via the new multiplexer framework and
> hooks that into the chipidea driver. This allows us to properly
> control host or device mode on this board via the sysfs kn
On 6/22/2017 4:34 PM, Mathias Nyman wrote:
> On 22.06.2017 13:44, Shyam Sundar S K wrote:
>>
>> On 6/19/2017 9:42 AM, Shyam Sundar S K wrote:
>>> on AMD platforms with SNPS 3.1 USB controller if stop endpoint command is
>>> issued the controller does not respond, when the EP is not in running
>>>
Hi,
On 12 July 2017 at 11:52, gustavo panizzo wrote:
> The dwc3 could not release resources when the module is built-in
> because this module does not have shutdown method. This causes the USB
> 3.0 hub is not able to detect after warm boot.
>
> Original patch by Brian Kim, updated and submitted
On 2017-07-12 03:02, Stephen Boyd wrote:
> On the db410c 96boards platform we have a TC7USB40MU on the board
> to mux the D+/D- lines coming from the controller between a micro
> usb "device" port and a USB hub for "host" roles[1]. During a
> role switch, we need to toggle this mux to forward the D
Hi,
On 3 July 2017 at 19:25, Manu Gautam wrote:
> Driver powers-off PHYs and reinitializes DWC3 core and gadget on
> resume. While this works fine for gadget mode but in host
> mode there is not re-initialization of host stack. Also, resetting
> bus as part of bus_suspend/resume is not correct wh
33 matches
Mail list logo
