Hi,
Masahiro Yamada writes:
> 2016-08-16 16:29 GMT+09:00 Felipe Balbi :
>>
>> Hi,
>>
>> Masahiro Yamada writes:
>>> The whole Kconfig entries of the USB subsystem are surrounded with
>>> "if USB_SUPPORT" ... "endif", so CONFIG_USB_SUPPORT=y is surely met
>>> when these two Kconfig options are v
Hi,
On 08/17/2016 04:26 PM, Oliver Neukum wrote:
> On Tue, 2016-08-16 at 16:46 +0300, Binyamin Sharet wrote:
>> Kernel version: raspberrypi 4.4.6-v7+ #871
>> Driver source file: drivers/usb/class/cdc-acm.c
>> Umap2 command line: umap2vsscan -P -s 22b8:2d93
> Hi,
>
> could you retest this kernel w
On 18.08.2016 09:27, Felipe Balbi wrote:
Hi,
Greg KH writes:
On Wed, Aug 17, 2016 at 09:56:02PM +0200, Filip Ayazi wrote:
Forwarding bug report from bugzilla #153211 as requested:
System crashes completely during or immediately after installing APK to android
phone over usb using android st
Hi,
"Felipe F. Tonello" writes:
> The default_length parameter of alloc_ep_req was not really necessary
> and gadget drivers would almost always create an inline function to pass
> the same value to len and default_len.
>
> So this patch also removes duplicate code from few drivers.
>
> Signed-o
On Thu, 2016-08-18 at 10:11 +0300, Binyamin Sharet wrote:
> Hi,
>
> On 08/17/2016 04:26 PM, Oliver Neukum wrote:
> > On Tue, 2016-08-16 at 16:46 +0300, Binyamin Sharet wrote:
> >> Kernel version: raspberrypi 4.4.6-v7+ #871
> >> Driver source file: drivers/usb/class/cdc-acm.c
> >> Umap2 command lin
Hi,
Baolin Wang writes:
> It will reset the xhci quirks in xhci_gen_setup() function when xhci try to
> add one hcd, thus we need to move the XHCI_LPM_SUPPORT quirk checking after
> adding hcd.
>
> Signed-off-by: Baolin Wang
> ---
> drivers/usb/host/xhci-plat.c |8
> 1 file change
Hi,
Baolin Wang writes:
> Now some usb controllers (such as dwc3 controller) need 'XHCI_SLOW_SUSPEND'
> quirk when suspending the xhci, thus we need to add 'usb3_slow_suspend' member
> in xhci platform data to support this.
>
> Signed-off-by: Baolin Wang
> ---
> drivers/usb/host/xhci-plat.c
Hi,
Baolin Wang writes:
> For some mobile devices with strict power management, we also want to suspend
> the host when the slave is detached for power saving.
>
> Thus we add the host suspend/resume functions to support this requirement, and
> we also should enable the 'XHCI_SLOW_SUSPEND' quirk
Yoshihiro-san,
Yoshihiro Shimoda writes:
> This patch set is based on the latest Felipe's usb.git / testing/next branch.
> (commit id = 15e4292a2d21e9997fdb2b8c014cc461b3f268f0)
>
> This patch set also needs an additional patch (like the end of this email)
> to fix the renesas_usbhs driver for R
Hi,
Hans de Goede writes:
> Hi,
>
> On 08/16/2016 03:48 PM, Sergei Shtylyov wrote:
>> Hello.
>>
>> On 08/15/2016 10:21 PM, Hans de Goede wrote:
>>
>>> Together with some musb sunxi glue changes this allows run-time dr_mode
>>> switching support via the "mode" musb sysfs attribute.
>>>
>>> Signed
Hi,
Binyamin Sharet writes:
> Felipe, Greg,
>
> You wrote pretty much the same things on two separate threads,
> so I will answer only here...
>
> On Tue, Aug 16, 2016 at 1:51 PM, Felipe Balbi
> wrote:
>>
>> Hi,
>>
>> Binyamin Sharet writes:
> 2. At least in my case, where I wan't to use g
On Wed, 2016-08-17 at 15:04 -0700, Guenter Roeck wrote:
> The following series of patches implements a USB Type-C Port Manager
> using the pending USB Type-C class code as basis. The code is still
> WIP,
> but I think it is important to get feedback from the community at this
> point.
Hi,
a quest
On Mon, 2016-08-08 at 20:30 +0200, Bjørn Mork wrote:
> Note that this doesn't include *every* ethernet driver, although there
> certainly are some examples. There are also a number of serious
> vendors, providing vendor supported drivers for cards with no known
> issues of this kind.
>
> Where ex
On 08/18/2016 10:44 AM, Felipe Balbi wrote:
> Hi,
>
> Binyamin Sharet writes:
>> Felipe, Greg,
>>
>> You wrote pretty much the same things on two separate threads,
>> so I will answer only here...
>>
>> On Tue, Aug 16, 2016 at 1:51 PM, Felipe Balbi
>> wrote:
>>> Hi,
>>>
>>> Binyamin Sharet write
On Wed, 2016-08-17 at 17:33 +0300, Binyamin Sharet wrote:
> On 08/17/2016 05:19 PM, Oliver Neukum wrote:
> > On Wed, 2016-08-17 at 17:07 +0300, Binyamin Sharet wrote:
> >> Downloading firmware...
> >> Firmware loaded. I'll be back...
> >> probe of 1-1.1:1.0 failed with error -5
> >>
> >> after tha
Johan, back in May you said:
I have three patches in my queue that didn't make the cut due to lack
off time on my side. They're at the top of the list.
Sorry about the delay.
Yet I've heard nothing since. Is there something wrong with this patch?
Martyn
On 22/07/16 11:33, Martyn Welch wrote:
Hi Felipe,
On 18 August 2016 at 15:18, Felipe Balbi wrote:
>
> Hi,
>
> Baolin Wang writes:
>> Now some usb controllers (such as dwc3 controller) need 'XHCI_SLOW_SUSPEND'
>> quirk when suspending the xhci, thus we need to add 'usb3_slow_suspend'
>> member
>> in xhci platform data to support this
Hi Felipe,
On 18 August 2016 at 15:33, Felipe Balbi wrote:
>
> Hi,
>
> Baolin Wang writes:
>> For some mobile devices with strict power management, we also want to suspend
>> the host when the slave is detached for power saving.
>>
>> Thus we add the host suspend/resume functions to support this
On Thu, Aug 18, 2016 at 09:52:22AM +0100, Martyn Welch wrote:
> Johan, back in May you said:
>
> I have three patches in my queue that didn't make the cut due to lack
> off time on my side. They're at the top of the list.
>
> Sorry about the delay.
>
> Yet I've heard nothing since. Is there some
HI,
On 18-08-16 09:40, Felipe Balbi wrote:
Hi,
Hans de Goede writes:
Hi,
On 08/16/2016 03:48 PM, Sergei Shtylyov wrote:
Hello.
On 08/15/2016 10:21 PM, Hans de Goede wrote:
Together with some musb sunxi glue changes this allows run-time dr_mode
switching support via the "mode" musb sysfs
On 18/08/16 10:02, Johan Hovold wrote:
On Thu, Aug 18, 2016 at 09:52:22AM +0100, Martyn Welch wrote:
Johan, back in May you said:
I have three patches in my queue that didn't make the cut due to lack
off time on my side. They're at the top of the list.
Sorry about the delay.
Yet I've heard
On 08/18/2016 12:02 PM, Oliver Neukum wrote:
> On Thu, 2016-08-18 at 12:03 +0300, Binyamin Sharet wrote:
>> On 08/18/2016 11:37 AM, Oliver Neukum wrote:
>>> On Wed, 2016-08-17 at 17:33 +0300, Binyamin Sharet wrote:
On 08/17/2016 05:19 PM, Oliver Neukum wrote:
> On Wed, 2016-08-17 at 17:07
On Thu, 2016-08-18 at 12:10 +0300, Binyamin Sharet wrote:
> On 08/18/2016 12:02 PM, Oliver Neukum wrote:
> > On Thu, 2016-08-18 at 12:03 +0300, Binyamin Sharet wrote:
> >> On 08/18/2016 11:37 AM, Oliver Neukum wrote:
> >>> On Wed, 2016-08-17 at 17:33 +0300, Binyamin Sharet wrote:
> On 08/17/20
Hi,
I was wondering about the fate of this patch.
As it fixes a security issue it should even go into
atable and I fear it has been lost.
Regards
Oliver
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.ker
On Thu, Aug 18, 2016 at 11:17:18AM +0200, Oliver Neukum wrote:
> Hi,
>
> I was wondering about the fate of this patch.
> As it fixes a security issue it should even go into
> atable and I fear it has been lost.
It will go to Linus tomorrow, and then can go into the stable trees.
It's in linux-nex
Hi,
Hans de Goede writes:
[...]
> void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
> {
> struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
[...]
$ scripts/checkpatch.pl
~/patches/phy-sun4i-usb-Add-support-for-phy_set_mode.patch
Hi,
Binyamin Sharet writes:
>>> I get your point, what I propose is not to change the default behavior
>>> of gadgetfs,
>>> but allow it to enter to a special mode by the user. I am aware of the
>>> issues that it
>>> might raise, and understand your concerns. However, I am a
On Wed, 2016-08-17 at 14:34 +0300, Binyamin Sharet wrote:
> > After connecting such a device, NULL pointer dereference in the
> kernel.
> > You may need to connect another device or two after this one to
> trigger
> > the oops.
> >
> > Binyamin Sharet
> > Cisco, STARE-C
> >
> > << Attached: 160a_3
On Wed, Aug 17, 2016 at 10:53:11AM -0700, Guenter Roeck wrote:
> On Wed, Aug 17, 2016 at 01:34:40PM +0300, Heikki Krogerus wrote:
> > The purpose of USB Type-C connector class is to provide
> > unified interface for the user space to get the status and
> > basic information about USB Type-C connect
On Wed, 2016-08-17 at 14:39 +0300, Binyamin Sharet wrote:
> On 08/16/2016 04:52 PM, Binyamin Sharet wrote:
> > Kernel version: raspberrypi 4.4.6-v7+ #871
> > Driver source file: drivers/media/usb/dvb-usb/dw2102.c
> > Umap2 command line: umap2vsscan -P -s 9022:d483
> >
> > After connecting such a d
On Wed, Aug 17, 2016 at 10:58:40AM -0700, Guenter Roeck wrote:
> On Wed, Aug 17, 2016 at 01:34:40PM +0300, Heikki Krogerus wrote:
> > The purpose of USB Type-C connector class is to provide
> > unified interface for the user space to get the status and
> > basic information about USB Type-C connect
On 08/18/2016 01:39 PM, Oliver Neukum wrote:
> On Wed, 2016-08-17 at 14:39 +0300, Binyamin Sharet wrote:
>> On 08/16/2016 04:52 PM, Binyamin Sharet wrote:
>>> Kernel version: raspberrypi 4.4.6-v7+ #871
>>> Driver source file: drivers/media/usb/dvb-usb/dw2102.c
>>> Umap2 command line: umap2vsscan -P
On 08/18/2016 01:25 PM, Felipe Balbi wrote:
> Hi,
>
> Binyamin Sharet writes:
I get your point, what I propose is not to change the default behavior
of gadgetfs,
but allow it to enter to a special mode by the user. I am aware of the
issues that it
might
Hi,
Binyamin Sharet writes:
[...]
> Many USB host implementations, including at least older versions of Linux,
> have bugs in the enumeration phase. While I cannot pinpoint a ToC/ToU
> vulnerability in the configuration descriptor at the moment, I found more
> than
> a cou
Hi,
Binyamin Sharet writes:
> On 08/18/2016 01:39 PM, Oliver Neukum wrote:
>> On Wed, 2016-08-17 at 14:39 +0300, Binyamin Sharet wrote:
>>> On 08/16/2016 04:52 PM, Binyamin Sharet wrote:
Kernel version: raspberrypi 4.4.6-v7+ #871
Driver source file: drivers/media/usb/dvb-usb/dw2102.c
>
Hi,
Baolin Wang writes:
> Hi Felipe,
>
> On 18 August 2016 at 15:18, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Baolin Wang writes:
>>> Now some usb controllers (such as dwc3 controller) need 'XHCI_SLOW_SUSPEND'
>>> quirk when suspending the xhci, thus we need to add 'usb3_slow_suspend'
>>> member
>
Hi,
Baolin Wang writes:
> Hi Felipe,
>
> On 18 August 2016 at 15:33, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Baolin Wang writes:
>>> For some mobile devices with strict power management, we also want to
>>> suspend
>>> the host when the slave is detached for power saving.
>>>
>>> Thus we add the
On 08/18/2016 12:12 PM, Oliver Neukum wrote:
> On Thu, 2016-08-18 at 12:10 +0300, Binyamin Sharet wrote:
>> On 08/18/2016 12:02 PM, Oliver Neukum wrote:
>>> On Thu, 2016-08-18 at 12:03 +0300, Binyamin Sharet wrote:
On 08/18/2016 11:37 AM, Oliver Neukum wrote:
> On Wed, 2016-08-17 at 17:33
Hi Felipe,
On 18 August 2016 at 20:25, Felipe Balbi wrote:
>
> Hi,
>
> Baolin Wang writes:
>> Hi Felipe,
>>
>> On 18 August 2016 at 15:18, Felipe Balbi wrote:
>>>
>>> Hi,
>>>
>>> Baolin Wang writes:
Now some usb controllers (such as dwc3 controller) need 'XHCI_SLOW_SUSPEND'
quirk whe
On Thu, 2016-08-18 at 15:41 +0300, Binyamin Sharet wrote:
> On 08/18/2016 12:12 PM, Oliver Neukum wrote:
> > On Thu, 2016-08-18 at 12:10 +0300, Binyamin Sharet wrote:
> >> On 08/18/2016 12:02 PM, Oliver Neukum wrote:
> >>> On Thu, 2016-08-18 at 12:03 +0300, Binyamin Sharet wrote:
> On 08/18/20
Hi Felipe,
On 18 August 2016 at 20:25, Felipe Balbi wrote:
>
> Hi,
>
> Baolin Wang writes:
>> Hi Felipe,
>>
>> On 18 August 2016 at 15:33, Felipe Balbi wrote:
>>>
>>> Hi,
>>>
>>> Baolin Wang writes:
For some mobile devices with strict power management, we also want to
suspend
t
On 08/18/2016 09:20 AM, Mathias Nyman wrote:
> On 18.08.2016 09:27, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Greg KH writes:
>>> On Wed, Aug 17, 2016 at 09:56:02PM +0200, Filip Ayazi wrote:
Forwarding bug report from bugzilla #153211 as requested:
System crashes completely during or imme
On Thu, Aug 18, 2016 at 12:43 AM, Oliver Neukum wrote:
> On Wed, 2016-08-17 at 15:04 -0700, Guenter Roeck wrote:
>> The following series of patches implements a USB Type-C Port Manager
>> using the pending USB Type-C class code as basis. The code is still
>> WIP,
>> but I think it is important to
Any ideas?
2016-08-04 23:08 GMT+03:00 Matwey V. Kornilov :
> When DMA is not used, I see the same behavior: lots of zero-length
> packages received.
>
> Can It be related to some kind of USB overflow due to long input data
> processing with disabled IRQ?
> When HCD_BC is used then part of processi
On 08/17/2016 11:33 PM, Felipe Balbi wrote:
Hi,
Peter Chen writes:
On Wed, Aug 17, 2016 at 03:53:24PM +0300, Felipe Balbi wrote:
Hi,
Heikki Krogerus writes:
[...]
+static struct platform_driver wcove_typec_driver = {
+ .driver = {
+ .name = "bxt_wcove_usbc
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Ma
Hi,
Javier Martinez Canillas writes:
> The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
> built-in or as a module, use that macro instead of open coding the same.
>
> Using the macro makes the code more readable by helping abstract away some
> of the Kconfig built-in and
Hi,
Felipe Balbi writes:
> Hi,
>
> Javier Martinez Canillas writes:
>> The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
>> built-in or as a module, use that macro instead of open coding the same.
>>
>> Using the macro makes the code more readable by helping abstract awa
Javier Martinez Canillas writes:
> The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
> built-in or as a module, use that macro instead of open coding the same.
>
> Using the macro makes the code more readable by helping abstract away some
> of the Kconfig built-in and modu
Hi Baolin,
Baolin Wang writes:
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index e2e2487..162f17c 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -250,6 +250,9 @@ static int xhci_plat_probe(struct platform
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Ma
Hi,
Baolin Wang writes:
[...]
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index 2e960ed..2ec3eff 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -17,8 +17,11 @@
>
> #include
> #include
> +#include
>
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Ma
On Wed, Aug 17, 2016 at 03:05:17PM +0300, Roger Quadros wrote:
> Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address
> translation"),
> dma_to_pfn() already returns the PFN with the physical memory start offset
> so we don't need to add it again.
>
> This fixes USB mass stora
On 08/18/2016 03:23 PM, Felipe Balbi wrote:
> Hi,
>
> Binyamin Sharet writes:
>> On 08/18/2016 01:39 PM, Oliver Neukum wrote:
>>> On Wed, 2016-08-17 at 14:39 +0300, Binyamin Sharet wrote:
On 08/16/2016 04:52 PM, Binyamin Sharet wrote:
> Kernel version: raspberrypi 4.4.6-v7+ #871
> Dri
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hello Mathias,
Can you please confirm of the erratic behavior we've discussed so far, on this
thread ?
It'd help to know if it really is a bug or something else.
On Fri, 2016-08-12 at 11:48 -0400, Alan Stern wrote:
> On Fri, 12 Aug 2016, Ritesh R
On 08/18/2016 03:18 PM, Felipe Balbi wrote:
> Hi,
>
> Binyamin Sharet writes:
>
> [...]
>
>> Many USB host implementations, including at least older versions of
>> Linux,
>> have bugs in the enumeration phase. While I cannot pinpoint a ToC/ToU
>> vulnerability in the configuration
On Tue, Aug 16, 2016 at 06:31:48PM -0400, Jaret Cantu wrote:
> The TX settings can be calibrated for particular hardware. The
> phy is reset by Linux, so this cannot be handled by the bootloader.
>
> The TRM mentions that the maximum resistance should be used for the
> DN/DP calibration in order
On Thu, Aug 18, 2016 at 09:55:55AM -0700, Santosh Shilimkar wrote:
> Hi Russell,
>
> On 8/18/2016 7:24 AM, Russell King - ARM Linux wrote:
> >On Wed, Aug 17, 2016 at 03:05:17PM +0300, Roger Quadros wrote:
> >>Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address
> >>translation
Hi Russell,
On 8/18/2016 7:24 AM, Russell King - ARM Linux wrote:
On Wed, Aug 17, 2016 at 03:05:17PM +0300, Roger Quadros wrote:
Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address
translation"),
dma_to_pfn() already returns the PFN with the physical memory start offset
so
If we have USB gadgets disabled and USB_MUSB_HOST set, we get
errors "possible irq lock inverssion dependency detected"
errors during boot.
Let's fix the issue by adding start_musb flag and start
the controller after we're out of the spinlock protected
section.
Reported-by: Ladislav Michl
Tested
On 8/17/2016 3:17 PM, Stefan Wahren wrote:
> Hi John,
>
>> John Youn hat am 17. August 2016 um 23:21
>> geschrieben:
>>
>>
>> ...
>> Ok, yeah, that seems better.
>>
>> Can you check if applying just patch 2 and 3 solves the issue? If so I
>> think we can send those upstream.
>
> unfortunately no
We can now just use PM runtime autoidle support as musb core
keeps things enabled when the devctl session bit is set. And
there's no need for dsps_musb_try_idle() so let's just remove
it.
Note that as cppi41 dma is clocked by musb, this only makes
PM work for dsps glue layer if CONFIG_MUSB_PIO_ONL
With musb core now blocking PM based on the devctl status
bit, we can remove related quirks from the 2430 glue layer
and simplify PM runtime further.
Lets's also use musb->controller instead of dev to make it
clear we make the PM runtime calls for the core, not the
glue layer.
And we can now also
We want to be polling the state when nothing is connected.
Let's change the polling logic in preparation for PM runtime
support.
Signed-off-by: Tony Lindgren
---
drivers/usb/musb/musb_dsps.c | 24 +++-
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/usb
On 8/18/2016 12:04 PM, Stefan Wahren wrote:
> Hi John,
>
>> John Youn hat am 18. August 2016 um 20:03
>> geschrieben:
>>
>>
>> On 8/17/2016 3:17 PM, Stefan Wahren wrote:
>>> Hi John,
>>>
John Youn hat am 17. August 2016 um 23:21
geschrieben:
...
Ok, yeah, that seems
Hi all,
Here's a series of patches to simplify musb PM runtime support further.
I finally figured out that we can get rid of most of the glue layer
specific workarounds by following the devctl session bit in musb core.
The series also adds PM runtime support to the musb dsps glue layer
for the P
Stefan Wahren writes:
> Hi Eric,
>
>> Eric Anholt hat am 18. August 2016 um 20:14 geschrieben:
>>
>>
>> Stefan Wahren writes:
>>
>> > This patch series is only a draft and not intended to be merged. Patches 1
>> > and 2
>> > aren't bcm2835 specific and should be helpful for other platforms.
On 7/26/2016 11:54 AM, Stefan Wahren wrote:
> Currently the fifo sizes for host/otg mode are defined per platform
> and doesn't take the mode into account. So we will get errors
> like this:
>
> dwc2 2098.usb: 256 invalid for host_nperio_tx_fifo_size.
> dwc2 2098.usb: Setting host_nperio_t
We want to keep musb enabled always when the session bit is
set. This simplifies the PM runtime and allows making it more
generic across the various glue layers.
So far the only exception to just following the session bit is
host mode disconnect where the session bit stays set.
In that case, just
Stefan Wahren writes:
> This patch series is only a draft and not intended to be merged. Patches 1
> and 2
> aren't bcm2835 specific and should be helpful for other platforms.
> The patches 2 - 4 are required for otg / gadget mode. The last patch
> based on the work of Lubomir Rintel [1] and No
Hi John,
> John Youn hat am 18. August 2016 um 20:03
> geschrieben:
>
>
> On 8/17/2016 3:17 PM, Stefan Wahren wrote:
> > Hi John,
> >
> >> John Youn hat am 17. August 2016 um 23:21
> >> geschrieben:
> >>
> >>
> >> ...
> >> Ok, yeah, that seems better.
> >>
> >> Can you check if applying just
The dwc3 driver expicitly looks for "usb2-phy" or "usb3-phy", but we
never noted these names in the documentation.
Signed-off-by: Brian Norris
---
Documentation/devicetree/bindings/usb/dwc3.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/binding
On 8/18/2016 4:07 PM, Russell King - ARM Linux wrote:
On Thu, Aug 18, 2016 at 09:55:55AM -0700, Santosh Shilimkar wrote:
Hi Russell,
On 8/18/2016 7:24 AM, Russell King - ARM Linux wrote:
On Wed, Aug 17, 2016 at 03:05:17PM +0300, Roger Quadros wrote:
Since commit 6ce0d2001692 ("ARM: dma: Use d
> "Oliver" == Oliver Neukum writes:
Oliver> Some SATA to USB bridges fail to cooperate with some drives
Oliver> resulting in no cache being present being reported to the
Oliver> host. That causes the host to skip sending a command to
Oliver> synchronize caches. That causes data loss when the
Hi Eric,
> Eric Anholt hat am 18. August 2016 um 20:14 geschrieben:
>
>
> Stefan Wahren writes:
>
> > This patch series is only a draft and not intended to be merged. Patches 1
> > and 2
> > aren't bcm2835 specific and should be helpful for other platforms.
> > The patches 2 - 4 are required
The following changes since commit f1f6d9a8b540df22b87a5bf6bc104edaade81f47:
xhci: don't dereference a xhci member after removing xhci (2016-08-16
09:42:47 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git/
tags/usb-ci-v4.8-rc3
Hi,
On Fri, Aug 12, 2016 at 10:23:15AM +0800, ayaka wrote:
> Hello all:
> I recently add a support for customize am3358 board using the branch
> processor-sdk-linux-03.00.00 from Ti git. But I meet a problem with musb
> at the peripheral mode.
> I have force usb1 in peripheral mode in dts as i
From: Yonglong Wu
In USB20 specification, describes in chapter 9.4.5: The Remote Wakeup
field can be modified by the SetFeature() and ClearFeature() requests
using the DEVICE_REMOTE_WAKEUP feature selector.
In USB30 specification, also describes in chapter 9.4.5: The Function
Remote Wakeup field
DEAR FRIEND,PLEASE URGENT RESPONSE!
I am Dr Paul Josel,the Audit and Account Manager (A.D.B)Bank in Ouagadougou
Burkina Faso,west africa
I have a business transaction for you.In my department i discovered an
abandoned Sum of US$10.2 Million Dollars.In an account that belongs to one of
our late
From: Oliver Neukum
Date: Wed, 17 Aug 2016 15:51:54 +0200
> These patches fix an oops in firmware downloading and an oops due
> to a memory allocation failure
Series applied, thanks Oliver.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord
81 matches
Mail list logo
