On Fri, Jun 10, 2016 at 12:30:56PM -0500, Rob Herring wrote:
> On Thu, Jun 09, 2016 at 01:42:02PM +0200, Krzysztof Kozlowski wrote:
> > On 06/09/2016 12:29 PM, Mark Brown wrote:
> > > On Thu, Jun 09, 2016 at 11:44:18AM +0200, Krzysztof Kozlowski wrote:
> > >> Few drivers have a need of getting regu
On Fri, Jun 10, 2016 at 04:17:28PM +0300, Roger Quadros wrote:
> Register with the USB OTG/DRD core. Since we don't support
> OTG yet we just work as a dual-role device even
> if device tree says "otg".
>
> Get ID and VBUS information from the OTG controller
> and kick the OTG state machine.
>
H
On Fri, Jun 10, 2016 at 04:07:15PM +0300, Roger Quadros wrote:
> The OTG core will use struct otg_gadget_ops to
> start/stop the gadget controller.
>
> The main purpose of this interface is to avoid directly
> calling usb_gadget_start/stop() from the OTG core as they
> wouldn't be defined in the b
On Sun, Jun 12, 2016 at 02:26:17PM +0800, Peter Chen wrote:
> On Thu, Jun 09, 2016 at 10:24:44AM +0300, Roger Quadros wrote:
> > On 08/06/16 15:42, Peter Chen wrote:
> > > On Wed, Jun 08, 2016 at 01:12:10PM +0300, Roger Quadros wrote:
> > >> Hi,
> > >>
> > >> On 08/06/16 12:53, Peter Chen wrote:
>
usb: common: otg-fsm: add license to usb-otg-fsm.
Fix warning about tainted kernel because usb-otg-fsm has no license.
WARNING: with this patch usb-otg-fsm module can be loaded
but then the kernel hangs. Tested with a udoo quad board.
Signed-off-by: Oscar Curero
---
--- a/drivers/usb/common/us
On Fri, Jun 10, 2016 at 04:07:17PM +0300, Roger Quadros wrote:
> index dca7856..03f7204 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -59,5 +59,6 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
> obj-$(CONFIG_USB_GADGET) += gadget/
>
> obj-$(CONFIG_USB_COMMO
On Fri, Jun 10, 2016 at 04:07:22PM +0300, Roger Quadros wrote:
>
> +/**
> + * usb_otg_add_gadget_udc - adds a new gadget to the udc class driver list
> + * @parent: the parent device to this udc. Usually the controller
> + * driver's device.
It seems it should be udc device
> +/* udc_lock must
On Sat, 11 Jun 2016, Sean M. Pappalardo wrote:
>
>
> On 06/10/2016 02:18 PM, Alan Stern wrote:
> > Actually, after reviewing the data files you sent I did have a thought.
> > Can you try out the patch below and see if it makes any difference?
>
> It did not, sorry.
Would you mind posting the
The Riso Kagaku Webmail Notifier (and its clones) is supported as part of
usb/misc/usbled driver currently. This patch migrates the driver for this
device to the HID subsystem.
Benefits:
- Avoid using USB low-level calls and use the HID subsystem instead
(as this device provides a USB HID interf
On Sat, Jun 11, 2016 at 02:55:04PM +0200, Marc Haber wrote:
> On Tue, Jun 07, 2016 at 10:30:17AM -0700, Greg KH wrote:
> > Nothing obvious, can you use 'git bisect' to go from 4.5.0 to 4.6.0 to
> > find the offending commit?
>
> I can. The first round of bisecting let me end up with
> c8b710b3e434
On Sun, 12 Jun 2016, Marc Haber wrote:
> On Sat, Jun 11, 2016 at 02:55:04PM +0200, Marc Haber wrote:
> > On Tue, Jun 07, 2016 at 10:30:17AM -0700, Greg KH wrote:
> > > Nothing obvious, can you use 'git bisect' to go from 4.5.0 to 4.6.0 to
> > > find the offending commit?
> >
> > I can. The first
Hello kernel hackers,
please excuse the way I'm writing this. I know I'm for sure braking rules.
I'm trying to use the usbip vhcd_hcd driver to monitor a beehive via an
exported usb mic. Usbip is great, because I can use a very small router running
openwrt and export the mic via usbip. Thanks fo
Hi there!
I'm sorry for imprecise subject, but I really have no clue how to describe
shortly...
My setup is IGEPv2 board with DM3730 SoC which has usb device connected
on EHCI controler via hub running linux-4.6. This device acts as serial-usb
converter and feeds IGEP with data. After some time s
Hello again.
On 06/12/2016 07:57 AM, Alan Stern wrote:
> Would you mind posting the contents of
> /sys/kernel/debug/usb/ehci/:00:1d.0/periodic, for the patched
> kernel, while the test is running?
Sure, attached. Sorry I didn't think to gather that before.
Sincerely,
Sean M. Pappalardo
siz
On Sun, Jun 12, 2016 at 11:03:45PM +0200, Ladislav Michl wrote:
> Once ttyACM0 starts behave strangely, read() returns only what's in buffer
> before
> ttyACM0 was opened and then hangs infinitely. As this bug is hard to trigger,
> has
> anyone clue where to start debugging?
Forgot to mention, o
On Sun, 12 Jun 2016, Sean M. Pappalardo wrote:
> Hello again.
>
> On 06/12/2016 07:57 AM, Alan Stern wrote:
> > Would you mind posting the contents of
> > /sys/kernel/debug/usb/ehci/:00:1d.0/periodic, for the patched
> > kernel, while the test is running?
>
> Sure, attached. Sorry I didn't
Correction to wording inconsistency around import and export in
usbip_list.c.
Please, see also cover letter about wording.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/src/usbip_list.c | 22 --
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/tools/usb/usbi
New application(vhci)-side daemon.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/libsrc/vhci_driver.c | 19 +++
tools/usb/usbip/libsrc/vhci_driver.h | 1 +
tools/usb/usbip/src/Makefile.am | 7 +-
tools/usb/usbip/src/usbipd.c | 12 +-
tools/usb/usbip/src/usbipd_app.c | 243
This patch adds function and usage of new connect operation, disconnect
operation and application(vhci)-side daemon to README and manuals.
At this point, the wording, 'server' and 'client' are ambiguous in
several place.
For existing attach command, the daemon runs device side machine and
atta
New disconnect operation.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/src/Makefile.am| 2 +-
tools/usb/usbip/src/usbip.c| 6 +
tools/usb/usbip/src/usbip.h| 2 +
tools/usb/usbip/src/usbip_disconnect.c | 215 +
4 files changed, 224 i
Refactoring to attach and detatch operation. Common parts to new
application(vhci)-side daemon are moved to libsrc/vhci_driver.c.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/libsrc/vhci_driver.c | 99
tools/usb/usbip/libsrc/vhci_driver.h | 6 +-
tools/usb/usbip
Modification to export and un-export response in
tools/usb/usbip/src/usbip_network.h. It just changes return code type
from int to uint32_t as same as other responses.
Added export and un-export request/response to
Documentation/usb/usbip_protocol.txt.
Signed-off-by: Nobuo Iwata
---
Document
usbip_host_find_device() is created based on usbip_host_get_device().
usbip_host_get_device() was not used yet.
bind and unbind function are exported for new operations.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/libsrc/usbip_host_common.c | 6 ++
tools/usb/usbip/libsrc/usbip_host_comm
New connect operation.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/src/Makefile.am | 3 +-
tools/usb/usbip/src/usbip.c | 9 +-
tools/usb/usbip/src/usbip.h | 5 +-
tools/usb/usbip/src/usbip_connect.c | 228
4 files changed, 242 insertions(
Refactoring to the daemon.
usbipd_dev.c is device-side specific code extracted from usbipd.c.
usbipd.c is left as common parts for both device(stub)-side and
application(vhci)-side daemon.
Signed-off-by: Nobuo Iwata
---
tools/usb/usbip/src/Makefile.am | 2 +-
tools/usb/usbip/src/usbipd.c
Dear all,
This series of patches adds exporting device operation to USB/IP.
1. Overview
Exporting devices may not be a new idea. The request and response PDU
have been defined in tools/usbip/usbip/src/usbip_network.h.
#define OP_EXPORT 0x06
#define OP_REQ_EXPORT (OP_REQUEST | OP_EXPORT)
The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
than rk3288 and before, and most of phy-related registers are also
different from the past, so a new phy driver is required necessarily.
Signed-off-by: Frank Wang
---
Changes in v5:
- Added 'reg' in the data block to match the di
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.
These series patches add phy-rockchip-inno-usb2.c and the corresponding
documentat
Signed-off-by: Frank Wang
---
Changes in v5:
- Added 'reg' property to identify the different phy-blocks.
Changes in v4:
- Used 'phy-supply' instead of 'vbus_*-supply'.
Changes in v3:
- Added 'clocks' and 'clock-names' optional properties.
- Specified 'otg-port' and 'host-port' as the sub-n
This series of patches extends number of ports limitaion in application
(vhci) side.
1. Background
Assuming a system shown below that services distributerd devices in
home or office via USB/IP, if the devices are set at every doors and
windows, number devices may be up to tens.
Home/SOHO/Ente
Modification to the userspace tools including usbip/libsrc and
usbip/src.
Changed corresponding to new vhci_sysfs.c.
nports in sysfs is used to get total number of ports.
Old get_nports() ignores the last status line because
udev_device_get_sysattr_value() drops last new line. New version use
Modification for dynamic device registration and unregistration.
1. kernel config
Followings are added.
USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host
controller. The default is 8 - same as current VHCI_NPORTS.
USBIP_VHCI_MAX_HCS: Muximum number of USB/IP virtual host controllers.
Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c.
1. kernel config
Followings are added.
USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host
controller. The default is 8 - same as current VHCI_NPORTS.
USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The
default
On Sun, Jun 12, 2016 at 03:29:01PM +0800, Peter Chen wrote:
> On Fri, Jun 10, 2016 at 12:30:56PM -0500, Rob Herring wrote:
> > On Thu, Jun 09, 2016 at 01:42:02PM +0200, Krzysztof Kozlowski wrote:
> > > On 06/09/2016 12:29 PM, Mark Brown wrote:
> > > > On Thu, Jun 09, 2016 at 11:44:18AM +0200, Krzys
On 06/12/2016 06:05 PM, Alan Stern wrote:
> Okay, thanks. I just wanted to be sure the patch was behaving as
> intended. It was, but since it didn't fix your problem the whole
> thing's a moot point.
Anything else you'd like me to try or gather if you're interested in
fixing the underlying p
Hi,
Peter Chen writes:
> On Wed, Jun 08, 2016 at 12:59:51PM +0300, Felipe Balbi wrote:
>>
>> Hi,
>>
>> kbuild test robot writes:
>> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
>> > testing/next
>> > head: fc4d1f3f522648d92d0c046beedbc1469979499a
>> > commit: 74e
Felipe Balbi writes:
> [ Unknown signature status ]
>
> Hi,
>
> Peter Chen writes:
>> On Wed, Jun 08, 2016 at 12:59:51PM +0300, Felipe Balbi wrote:
>>>
>>> Hi,
>>>
>>> kbuild test robot writes:
>>> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
>>> > testing/next
>>>
On Mon, Jun 13, 2016 at 09:01:55AM +0300, Felipe Balbi wrote:
> Felipe Balbi writes:
>
> Here's an updated version:
>
> From d45bdfafc3143dc7acc9d71131807d3e30ab7bcd Mon Sep 17 00:00:00 2001
> From: Felipe Balbi
> Date: Tue, 31 May 2016 13:07:47 +0300
> Subject: [PATCH] usb: gadget: move gadget
38 matches
Mail list logo
