On Mon, Sep 07, 2015 at 01:53:19PM +0300, Roger Quadros wrote:
> On 07/09/15 10:40, Li Jun wrote:
> > On Mon, Aug 24, 2015 at 04:21:18PM +0300, Roger Quadros wrote:
> >> The OTG core instantiates the OTG Finite State Machine
> >> per OTG controller and manages starting/stopping the
> >> host and ga
Hello All,
Please, I need to know how is the maintainer of
drivers/usb/serial/mos7840.c for kernel version 2.6.32.
Many thanks,
Frank
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vg
Hi,
On 08-09-15 16:36, Alan Stern wrote:
On Tue, 8 Sep 2015, Hans de Goede wrote:
Hi,
On 09/07/2015 06:23 PM, Mian Yousaf Kaukab wrote:
urb completion callback is executed in host controllers interrupt
context. To keep preempt disable time short, add urbs to a list on
completion and schedule
From: Peter Chen
Add imx7d usb support.
Signed-off-by: Peter Chen
Signed-off-by: Li Jun
---
Change for v3:
- Remove CI_HDRC_DISABLE_HOST_STREAMING and CI_HDRC_TURN_VBUS_EARLY_ON
since they are required for i.mx7d
drivers/usb/chipidea/ci_hdrc_imx.c |5 +++
drivers/usb/chipidea/usbmisc_i
Use imx6sx instead of imx6sl's platform flags for imx6sx.
Signed-off-by: Li Jun
---
drivers/usb/chipidea/ci_hdrc_imx.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c
b/drivers/usb/chipidea/ci_hdrc_imx.c
index c038bca..c7f127f 100644
---
On Wednesday 09 September 2015 10:30:12 Hans de Goede wrote:
> On 08-09-15 16:36, Alan Stern wrote:
> > On Tue, 8 Sep 2015, Hans de Goede wrote:
> >> On 09/07/2015 06:23 PM, Mian Yousaf Kaukab wrote:
> >>> urb completion callback is executed in host controllers interrupt
> >>> context. To keep pree
On 09/09/15 05:21, Peter Chen wrote:
> On Tue, Sep 08, 2015 at 03:25:25PM +0300, Roger Quadros wrote:
>>
>>
>> On 08/09/15 11:31, Peter Chen wrote:
>>> On Mon, Sep 07, 2015 at 01:23:01PM +0300, Roger Quadros wrote:
On 07/09/15 04:23, Peter Chen wrote:
> On Mon, Aug 24, 2015 at 04:21:18PM +
On Mon, Aug 31, 2015 at 10:11:20AM +0200, Vincent Stehlé wrote:
> On 08/28/2015 10:29 AM, Peter Chen wrote:
> ..
> > Would you supply below:
> > 1. The u-boot.bin which you use to reproduce it
>
> Hi Peter,
>
> Thank you for looking into this issue.
>
> I attached u-boot.imx to the ticket for yo
On Wed, Sep 09, 2015 at 12:08:10PM +0300, Roger Quadros wrote:
> On 09/09/15 05:21, Peter Chen wrote:
> > On Tue, Sep 08, 2015 at 03:25:25PM +0300, Roger Quadros wrote:
> >>
> >>
> >> On 08/09/15 11:31, Peter Chen wrote:
> >>> On Mon, Sep 07, 2015 at 01:23:01PM +0300, Roger Quadros wrote:
> On
On 09/09/15 11:13, Peter Chen wrote:
> On Wed, Sep 09, 2015 at 12:08:10PM +0300, Roger Quadros wrote:
>> On 09/09/15 05:21, Peter Chen wrote:
>>> On Tue, Sep 08, 2015 at 03:25:25PM +0300, Roger Quadros wrote:
On 08/09/15 11:31, Peter Chen wrote:
> On Mon, Sep 07, 2015 at 01:23:01
On 09/09/15 05:23, Peter Chen wrote:
> On Mon, Aug 24, 2015 at 04:21:21PM +0300, Roger Quadros wrote:
>> The existing usb_add/remove_hcd() functionality
>> remains unchanged for non-OTG devices. For OTG
>> devices they only register the HCD with the OTG core.
>>
>> Introduce usb_otg_add/remove_hcd(
On 9 September 2015 at 03:33, Rob Herring wrote:
> On 09/08/2015 02:30 AM, Tomeu Vizoso wrote:
>> On 7 September 2015 at 22:50, Rob Herring wrote:
>>> On Mon, Sep 7, 2015 at 7:23 AM, Tomeu Vizoso
>>> wrote:
Hello,
I have a problem with the panel on my Tegra Chromebook taking long
On Wed, Sep 09, 2015 at 12:33:20PM +0300, Roger Quadros wrote:
> On 09/09/15 11:13, Peter Chen wrote:
> > On Wed, Sep 09, 2015 at 12:08:10PM +0300, Roger Quadros wrote:
> >> On 09/09/15 05:21, Peter Chen wrote:
> >>> On Tue, Sep 08, 2015 at 03:25:25PM +0300, Roger Quadros wrote:
>
>
> >>>
On 09/09/15 09:20, Li Jun wrote:
> On Mon, Sep 07, 2015 at 01:53:19PM +0300, Roger Quadros wrote:
>> On 07/09/15 10:40, Li Jun wrote:
>>> On Mon, Aug 24, 2015 at 04:21:18PM +0300, Roger Quadros wrote:
The OTG core instantiates the OTG Finite State Machine
per OTG controller and manages st
From: Gregory Herrero
During hcd initialization, hardware accessible flag and lx_state must
be reset to the working state since controller is powered at this stage.
Same logic applied for stop callback.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
Hi,
This series consists of various bug fixes for both host and gadget
sides. All patches are verified on dwc2 v3.0a with dedicated fifos.
It would be good to get some Tested-bys for other platforms.
It is based on testing/next branch in Felipe's git and depends on [1].
Thank you,
Best regards,
From: Gregory Herrero
port resume sequence may be used in different places. Create a
function to handle it. Moreover, make hprt0 read-modify-write atomic.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/hcd.c | 30 ++
From: Gregory Herrero
lx_state must be used to reflect controller power state only and not
bus state. Thus add a flag to track state during bus suspend.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/core.h | 1 +
drivers/usb/d
From: Gregory Herrero
When entering hibernation hprt0 must be read using dwc2_read_hprt0().
Otherwise, any set hprt0 status bits will be cleared when restoring
hprt0 on exit from hibernation.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drive
From: Gregory Herrero
Disable controller power and enter hibernation when usb bus is
suspended. A phy driver is required to disable the power of the
controller and detect remote-wakeup or disconnection since the
controller will not be able to detect these in this state.
Once the phy driver detec
From: Gregory Herrero
Disable host interrupts before synchronising dwc2 irq.
So that interrupts are not generated once controller is stopped.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/hcd.c | 3 +++
1 file changed, 3 inser
From: Gregory Herrero
In case controller is asked to stop while devices are connected,
disconnect all devices and clean up before stopping.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/hcd.c | 5 +
1 file changed, 5 inser
From: Gregory Herrero
If hibernation is supported, resume of devices will be handled in
bus_resume callback.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/core_intr.c | 4
1 file changed, 4 insertions(+)
diff --git a/dri
From: Gregory Herrero
Port can be resumed in bus_resume callback.
In this case, there is no need to drive resume a second time
when hcd ask for it.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/hcd.c | 3 ++-
1 file changed, 2
GINTSTS.DisconnInt is host only interrupt and should be disable after
dwc2_disable_host_interrupts is called.
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/core.c
From: Gregory Herrero
Frame number is reset in hardware after exiting hibernation.
Thus, reset frame_number and ensure qh are queued with correct
sched_frame.
Otherwise, qh->sched_frame may be too high compared to
current frame number (which is 0). This can delay addition of qh in
the list of tr
From: Gregory Herrero
When a device is disconnected, lx_state must not be changed since the
device may be disconnected whereas controller is still powered.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/core_intr.c | 3 ---
1 f
From: Gregory Herrero
On first qh initialization, hsotg->frame_number is not corresponding
to reality. So read it from host controller to get correct value.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/hcd_queue.c | 3 +++
1
From: Gregory Herrero
On a disconnect, dwc2 will kill all remaining urbs from qh list.
urbs are given back to hcd with -ETIMEDOUT status.
Some usb device driver, like mass storage, will unlink all urbs
using usb_hcd_unlink_urb when receiving a negative status different
from -ECONNRESET.
The follo
From: Gregory Herrero
Correctly update lx_state on gadget connection and disconnection.
When usb cable is disconnected, lx_state must be updated to L3 as
controller could be in power off state.
When usb cable is connected, lx_state must be updated to L0 as
controller is powered.
Signed-off-by: G
From: Gregory Herrero
Modifying the pullup state during host mode trig a new enumeration
of attached device. Thus, avoid modifying pullup in host mode.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 9 -
1 fi
From: Gregory Herrero
Some high speed mass storage devices fail to enumerate with following
error:
Cannot enable port %i. Maybe the USB cable is bad?
This happens only when the device is plugged while the controller
is in hibernation state. After exiting hibernation, the controller
detects the
ID status change interrupt will not be handled in peripheral only
configuration. So initialize op_state during gadget init.
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc2/gadget.c b
From: Gregory Herrero
Print urb->iso_frame_desc.status after it has been updated using
dwc2_hcd_urb_get_iso_desc_status().
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/hcd.c | 11 ++-
1 file changed, 6 insertions(+),
From: Gregory Herrero
If an interrupt rises during hibernation process, dwc2 will assert
interrupt line to interrupt controller. If interrupt is level
sensitive, interrupt handler will be called in a loop because dwc2
will not be able to clear it while controller is hibernated.
Thus, clear all co
From: Gregory Herrero
When disconnecting cable, controller will detect a suspend condition
and enter partial power down. If vbus_session is called by the phy
driver during hibernation, make sure controller exit hibernation
before it is accessed.
Signed-off-by: Jianqiang Tang
Signed-off-by: Greg
From: Gregory Herrero
idstschng interrupt should not be used when id pin control is
external. This is already handled on dwc2 host part. Fix it on gadget
part as well.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 1
dwc2_hsotg_start_req starts a request only if endpoint is not stalled.
Ignore this check for ep0 as core will clear DOEPCTL0.Stall after
sending stall handshake. Prepare instead for receiving next setup
packet.
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gad
If system is loaded, reset, enum-done and setup interrupts can occur
at the same time. Current interrupt handling sequence will handle
setup packet's interrupt before handling reset interrupt. Which will
break the enumeration process. Correct sequence is to handle reset,
enum-done and then any othe
From: Gregory Herrero
No point of continue with initialization if core is not in a sane
state.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/dri
Controller enters hibernation through suspend interrupt on
disconnection. On connection, session request interrupt is generated.
dwc2 must exit hibernation and restore state from this interrupt
before continuing.
In host mode, exit from hibernation is handled by bus_resume function.
Signed-off-by
If dual role configuration is not selected, check and force dr_mode
based on the selected configuration.
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/platform.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/dwc2/platform.c b/dri
wIndex field was missing. Also print in natural order instead of
Req first, so that its easier to compare for example against
bus analyzer logs.
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
If the request being dequeued is already started, disable endpoint
to stop the transfer and then call dwc2_hsotg_complete_request().
Endpoint will be re-enabled on next call to dwc2_hsotg_start_req().
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 77
Make sure there are no requests pending on ep0 before reinitializing
core. Otherwise, dwc2_hsotg_enqueue_setup will fail afterwards.
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
drivers/usb/dwc2/gadget.c | 8 +++-
1 file changed, 3 insertions(+), 5 deletions(-)
diff --gi
From: Gregory Herrero
Some device may have external id pin control enabled, so op_state
will not be set on id pin interrupt change.
Thus, ensure op_state is set to peripheral during vbus detection.
Signed-off-by: Gregory Herrero
Signed-off-by: Mian Yousaf Kaukab
Tested-by: Robert Baldyga
---
There is a 200ms guard period to avoid unnecessary resets of the dwc2
ip. This delay sometimes prove to be too large when usbcv is run with
an ehci host. dwc2 only needs to be reset after addressed state.
Change the logic to reset ip after addressed state.
Signed-off-by: Mian Yousaf Kaukab
Tested
On 09/09/15 11:45, Peter Chen wrote:
> On Wed, Sep 09, 2015 at 12:33:20PM +0300, Roger Quadros wrote:
>> On 09/09/15 11:13, Peter Chen wrote:
>>> On Wed, Sep 09, 2015 at 12:08:10PM +0300, Roger Quadros wrote:
On 09/09/15 05:21, Peter Chen wrote:
> On Tue, Sep 08, 2015 at 03:25:25PM +0300,
(adding back folks in cc)
On 08/09/15 20:35, Alan Stern wrote:
> On Tue, 8 Sep 2015, Roger Quadros wrote:
>
What if there is another architecture like so?
C:
[Parent]
|
|
|
On Wed, Sep 09, 2015 at 09:55:52AM +0200, mar...@franksalomon.de wrote:
> Hello All,
>
> Please, I need to know how is the maintainer of
> drivers/usb/serial/mos7840.c for kernel version 2.6.32.
I'm the maintainer for that driver, but the 2.6.32 stable kernel is
maintained by Willy Tarreau. Note
Set musb config->maximum_speed based on the dts setting to control musb
speed.
By default musb works in high-speed mode. Adding
maximum-speed = "full-speed";
to dts usb node will force musb to full-speed mode.
Signed-off-by: Bin Liu
---
drivers/usb/musb/musb_dsps.c | 14 ++
Set the Power register HSENAB bit based on musb->config->maximum_speed,
so that the glue layer can control MUSB to work in high- or full-speed.
Signed-off-by: Bin Liu
---
drivers/usb/musb/musb_core.c | 10 +-
include/linux/usb/musb.h | 2 +-
2 files changed, 6 insertions(+), 6 delet
On Wed, Sep 02, 2015 at 10:02:53AM +0200, Oliver Neukum wrote:
> On Tue, 2015-09-01 at 17:54 -0500, Peter E. Berger wrote:
> > From: "Peter E. Berger"
> >
> > Use serial->interface instead of serial->dev for messages in download_fw().
>
> Why? The firmware is per device isn't it?
> So what sense
Hello.
On 9/9/2015 4:37 PM, Bin Liu wrote:
Set musb config->maximum_speed based on the dts setting to control musb
speed.
By default musb works in high-speed mode. Adding
maximum-speed = "full-speed";
to dts usb node will force musb to full-speed mode.
Signed-off-by: Bin Liu
---
On 09/08/2015 01:17 AM, Chunfeng Yun wrote:
> add a DT binding documentation of usb3.0 phy for MT65xx
> SoCs from Mediatek.
>
> Signed-off-by: Chunfeng Yun
Acked-by: Rob Herring
> ---
> .../devicetree/bindings/phy/phy-mt65xx-usb.txt | 69
> ++
> 1 file changed, 69 ins
Hi,
On 09/09/2015 08:56 AM, Sergei Shtylyov wrote:
Hello.
On 9/9/2015 4:37 PM, Bin Liu wrote:
Set musb config->maximum_speed based on the dts setting to control musb
speed.
By default musb works in high-speed mode. Adding
maximum-speed = "full-speed";
to dts usb node will force musb to
On Tue, Sep 01, 2015 at 05:54:16PM -0500, Peter E. Berger wrote:
> From: "Peter E. Berger"
>
> Separate the download and boot mode code from download_fw() into two new
> helper functions: do_download_mode() and do_boot_mode(), and fix formatting
> in some of the comments.
Please do the comment s
On Tue, Sep 01, 2015 at 05:54:18PM -0500, Peter E. Berger wrote:
> From: "Peter E. Berger"
>
> Move request_firmware from edge_startup to download_fw
>
> Signed-off-by: Peter E. Berger
> ---
> drivers/usb/serial/io_ti.c | 56
> --
> 1 file changed,
On Wed, 9 Sep 2015, Hans de Goede wrote:
> Hi,
>
> On 08-09-15 16:36, Alan Stern wrote:
> > On Tue, 8 Sep 2015, Hans de Goede wrote:
> >
> >> Hi,
> >>
> >> On 09/07/2015 06:23 PM, Mian Yousaf Kaukab wrote:
> >>> urb completion callback is executed in host controllers interrupt
> >>> context. To k
On Wed, 9 Sep 2015, Laurent Pinchart wrote:
> On Wednesday 09 September 2015 10:30:12 Hans de Goede wrote:
> > On 08-09-15 16:36, Alan Stern wrote:
> > > On Tue, 8 Sep 2015, Hans de Goede wrote:
> > >> On 09/07/2015 06:23 PM, Mian Yousaf Kaukab wrote:
> > >>> urb completion callback is executed in
Hi Alan,
I've switched to kernel 4.2 for the latest debug sessions.
In drivers/usb/host/ehci-hcd.c, ehci_stop calls
ehci_silence_controller which calls ehci_halt:
static int ehci_halt (struct ehci_hcd *ehci)
{
u32 temp;
printk(KERN_INFO "ehci_halt: entry\n");
spin_lock_irq(&ehci->lock);
On Wed, 9 Sep 2015, Roger Quadros wrote:
> (adding back folks in cc)
>
> On 08/09/15 20:35, Alan Stern wrote:
> > On Tue, 8 Sep 2015, Roger Quadros wrote:
> >
> What if there is another architecture like so?
>
> C:
> [Parent]
> |
> >>
Hi Alan,
On Wednesday 09 September 2015 11:14:38 Alan Stern wrote:
> On Wed, 9 Sep 2015, Laurent Pinchart wrote:
> > On Wednesday 09 September 2015 10:30:12 Hans de Goede wrote:
> >> On 08-09-15 16:36, Alan Stern wrote:
> >>> On Tue, 8 Sep 2015, Hans de Goede wrote:
> On 09/07/2015 06:23 PM,
On Wed, Sep 09, 2015 at 09:04:55AM -0500, Bin Liu wrote:
> Hi,
>
> On 09/09/2015 08:56 AM, Sergei Shtylyov wrote:
> >Hello.
> >
> >On 9/9/2015 4:37 PM, Bin Liu wrote:
> >
> >>Set musb config->maximum_speed based on the dts setting to control musb
> >>speed.
> >>
> >>By default musb works in high-s
On Wed, 9 Sep 2015, Roland Weber wrote:
> Hi Alan,
>
> I've switched to kernel 4.2 for the latest debug sessions.
> In drivers/usb/host/ehci-hcd.c, ehci_stop calls
> ehci_silence_controller which calls ehci_halt:
>
> static int ehci_halt (struct ehci_hcd *ehci)
> {
> u32 temp;
>
> printk(KE
On Wed, 9 Sep 2015, Laurent Pinchart wrote:
> > > Instead of fixing the issue in the uvcvideo driver, would it then make
> > > more sense to fix it in the remaining hcd drivers ?
> >
> > Unfortunately that's not so easy. It involves some subtle changes
> > related to the way isochronous endpoint
Set musb config->maximum_speed based on the dts setting to control musb
speed.
By default musb works in high-speed mode. Adding
maximum-speed = "full-speed";
to dts usb node will force musb to full-speed mode.
Signed-off-by: Bin Liu
---
drivers/usb/musb/musb_dsps.c | 13 +
Hi,
On 09/09/2015 08:37 AM, Bin Liu wrote:
Set the Power register HSENAB bit based on musb->config->maximum_speed,
so that the glue layer can control MUSB to work in high- or full-speed.
Signed-off-by: Bin Liu
---
drivers/usb/musb/musb_core.c | 10 +-
include/linux/usb/musb.h |
On Wed, Sep 09, 2015 at 12:18:27PM -0500, Bin Liu wrote:
> Hi,
>
> On 09/09/2015 08:37 AM, Bin Liu wrote:
> >Set the Power register HSENAB bit based on musb->config->maximum_speed,
> >so that the glue layer can control MUSB to work in high- or full-speed.
> >
> >Signed-off-by: Bin Liu
> >---
> >
Hi,
On Wed, Sep 9, 2015 at 12:26 PM, Felipe Balbi wrote:
> On Wed, Sep 09, 2015 at 12:18:27PM -0500, Bin Liu wrote:
>> Hi,
>>
>> On 09/09/2015 08:37 AM, Bin Liu wrote:
>> >Set the Power register HSENAB bit based on musb->config->maximum_speed,
>> >so that the glue layer can control MUSB to work i
On Wed, Sep 09, 2015 at 12:46:43PM -0500, Bin Liu wrote:
> Hi,
>
> On Wed, Sep 9, 2015 at 12:26 PM, Felipe Balbi wrote:
> > On Wed, Sep 09, 2015 at 12:18:27PM -0500, Bin Liu wrote:
> >> Hi,
> >>
> >> On 09/09/2015 08:37 AM, Bin Liu wrote:
> >> >Set the Power register HSENAB bit based on musb->con
On Wed, Sep 9, 2015 at 12:51 PM, Felipe Balbi wrote:
> On Wed, Sep 09, 2015 at 12:46:43PM -0500, Bin Liu wrote:
>> Hi,
>>
>> On Wed, Sep 9, 2015 at 12:26 PM, Felipe Balbi wrote:
>> > On Wed, Sep 09, 2015 at 12:18:27PM -0500, Bin Liu wrote:
>> >> Hi,
>> >>
>> >> On 09/09/2015 08:37 AM, Bin Liu wro
On Wed, Sep 09, 2015 at 12:55:24PM -0500, Bin Liu wrote:
> On Wed, Sep 9, 2015 at 12:51 PM, Felipe Balbi wrote:
> > On Wed, Sep 09, 2015 at 12:46:43PM -0500, Bin Liu wrote:
> >> Hi,
> >>
> >> On Wed, Sep 9, 2015 at 12:26 PM, Felipe Balbi wrote:
> >> > On Wed, Sep 09, 2015 at 12:18:27PM -0500, Bin
On Wed, Sep 9, 2015 at 12:56 PM, Felipe Balbi wrote:
> On Wed, Sep 09, 2015 at 12:55:24PM -0500, Bin Liu wrote:
>> On Wed, Sep 9, 2015 at 12:51 PM, Felipe Balbi wrote:
>> > On Wed, Sep 09, 2015 at 12:46:43PM -0500, Bin Liu wrote:
>> >> Hi,
>> >>
>> >> On Wed, Sep 9, 2015 at 12:26 PM, Felipe Balbi
Set the Power register HSENAB bit based on musb->config->maximum_speed,
so that the glue layer can control MUSB to work in high- or full-speed.
Signed-off-by: Bin Liu
---
drivers/usb/musb/musb_core.c | 16 ++--
include/linux/usb/musb.h | 2 +-
2 files changed, 11 insertions(+),
> -Original Message-
> From: John Youn [mailto:john.y...@synopsys.com]
> Sent: September-03-15 11:53 PM
> To: Scott Branden; John Youn; Greg Kroah-Hartman; linux-
> u...@vger.kernel.org; Roman Bacik
> Cc: linux-ker...@vger.kernel.org; bcm-kernel-feedback-list
> Subject: Re: [PATCH v2 1/1] u
On Wed, Sep 09, 2015 at 09:55:52AM +0200, mar...@franksalomon.de wrote:
> Hello All,
>
> Please, I need to know how is the maintainer of drivers/usb/serial/mos7840.c
> for kernel version 2.6.32.
No one "maintains" that old, obsolete, kernel version for new fixes.
Please ask the company that is fo
On 09/08/2015 05:16 PM, Reinhard Speyerer wrote:
> On Mon, Aug 31, 2015 at 07:18:05PM +, Ward, David - 0665 - MITLL wrote:
>> On 01/06/2015 03:58 AM, Bj=F8rn Mork wrote:
>>> Johan Hovold writes:
>>>
Ok, let's move the PID to option and if it turns out that more of these
devices requi
Hello,
On 09/01/2015 05:29 PM, Javier Martinez Canillas wrote:
> Hello Greg and Felipe,
>
> On 08/25/2015 08:31 AM, Javier Martinez Canillas wrote:
>> The I2C core always reports the MODALIAS uevent as "i2c:> regardless if the driver was matched using the I2C id_table or the
>> of_match_table. So
On 9/9/2015 11:16 AM, Roman Bacik wrote:
>> -Original Message-
>> From: John Youn [mailto:john.y...@synopsys.com]
>> Sent: September-03-15 11:53 PM
>> To: Scott Branden; John Youn; Greg Kroah-Hartman; linux-
>> u...@vger.kernel.org; Roman Bacik
>> Cc: linux-ker...@vger.kernel.org; bcm-kerne
> -Original Message-
> From: John Youn [mailto:john.y...@synopsys.com]
> Sent: September-09-15 7:11 PM
> To: Roman Bacik; John Youn; Scott Branden; Greg Kroah-Hartman; linux-
> u...@vger.kernel.org
> Cc: linux-ker...@vger.kernel.org; bcm-kernel-feedback-list
> Subject: Re: [PATCH v2 1/1] us
> -Original Message-
> From: Roman Bacik
> Sent: September-09-15 7:17 PM
> To: 'John Youn'; Scott Branden; Greg Kroah-Hartman; linux-
> u...@vger.kernel.org
> Cc: linux-ker...@vger.kernel.org; bcm-kernel-feedback-list
> Subject: RE: [PATCH v2 1/1] usb: dwc2: gadget: parity fix in isochronou
On 9/9/2015 7:16 PM, Roman Bacik wrote:
>> -Original Message-
>> From: John Youn [mailto:john.y...@synopsys.com]
>> Sent: September-09-15 7:11 PM
>> To: Roman Bacik; John Youn; Scott Branden; Greg Kroah-Hartman; linux-
>> u...@vger.kernel.org
>> Cc: linux-ker...@vger.kernel.org; bcm-kernel-
> -Original Message-
> From: John Youn [mailto:john.y...@synopsys.com]
> Sent: September-09-15 7:25 PM
> To: Roman Bacik; John Youn; Scott Branden; Greg Kroah-Hartman; linux-
> u...@vger.kernel.org
> Cc: linux-ker...@vger.kernel.org; bcm-kernel-feedback-list
> Subject: Re: [PATCH v2 1/1] us
> -Original Message-
> From: Roman Bacik
> Sent: September-09-15 7:36 PM
> To: 'John Youn'; Scott Branden; Greg Kroah-Hartman; linux-
> u...@vger.kernel.org
> Cc: linux-ker...@vger.kernel.org; bcm-kernel-feedback-list
> Subject: RE: [PATCH v2 1/1] usb: dwc2: gadget: parity fix in isochronou
On Wed, Sep 09, 2015 at 01:21:50PM +0300, Roger Quadros wrote:
> On 09/09/15 11:45, Peter Chen wrote:
> > On Wed, Sep 09, 2015 at 12:33:20PM +0300, Roger Quadros wrote:
> >> On 09/09/15 11:13, Peter Chen wrote:
> >>> On Wed, Sep 09, 2015 at 12:08:10PM +0300, Roger Quadros wrote:
> On 09/09/15
86 matches
Mail list logo
