On Sun, Mar 29, 2015 at 12:45 AM, Sergei Shtylyov
wrote:
> Fix using the bare number to set the 'bDescriptorType' field of the Hub
> Descriptor while the value is #define'd in .
>
> Signed-off-by: Sergei Shtylyov
>
> ---
> drivers/usb/usbip/vhci_hcd.c |2 +-
> 1 file changed, 1 insertion(
Hi all,
I'm on USB certification of a vendor SoC, and there's a case called
"Bus powered hub power exceeded test" in the compliance plan defined
by the usb.org. It requires an error message when a device (Max power
descriptor >100mA) is attached to an external bus powered hub.
But when I attached
(Sorry for the belated response.)
Am Mon, 23 Mar 2015 17:14:27 -0400 (EDT)
schrieb Alan Stern :
> On Mon, 23 Mar 2015, Marc Joliet wrote:
>
> > OK, so obviously the drive is doing something wrong. I'm just confused
> > about
> > why one way works and not the other:
> >
> > - Boot up the compu
On Tue, 31 Mar 2015, Rong Wang wrote:
> Hi all,
>
> I'm on USB certification of a vendor SoC, and there's a case called
> "Bus powered hub power exceeded test" in the compliance plan defined
> by the usb.org. It requires an error message when a device (Max power
> descriptor >100mA) is attached t
On Tue, 31 Mar 2015, Marc Joliet wrote:
> > Like Matt suggested, the most reasonable possibility is an interaction
> > with the BIOS.
>
> Like I said in my replay to Matt, the BIOS doesn't support booting via USB.
> The
If it supports a USB keyboard, it might still go through and initialize
On Tue, 31 Mar 2015, Peter Chen wrote:
> I reproduced this issue, I can't see the fifth endpoints during the SoFs
> although the time to SoF boundary is about 800us, see attached.
>
> - At transaction 3749, the third UAC2 gadget is ready to send/receive
> data.
> - At next SoF periods, the first
On Friday 27 March 2015 04:37 AM, Dmitry Torokhov wrote:
On Wed, Mar 25, 2015 at 05:04:32PM -0700, Arun Ramamurthy wrote:
On 15-03-25 03:03 PM, Kishon Vijay Abraham I wrote:
Hi,
On Saturday 21 March 2015 02:59 AM, Arun Ramamurthy wrote:
On 15-03-20 02:26 PM, Dmitry Torokhov wrote:
Hi A
Hi,
this series contain what I needed to do in order to have my USB webcam to not
be resumed when the system resumes, reducing considerably the total time that
resuming takes.
It makes use of the facility that Rafael Wysocki added in aae4518b3 ("PM /
sleep: Mechanism to avoid resuming runtime-
Have dev_pm_ops.prepare return 1 for USB devices, interfaces, endpoints
and ports so that USB devices can remain runtime-suspended when the
system goes to a sleep state.
Also enable runtime PM for endpoints, which is another requirement for
the above to work.
Signed-off-by: Tomeu Vizoso
---
dri
On Tue, 31 Mar 2015, Tomeu Vizoso wrote:
> Have dev_pm_ops.prepare return 1 for USB devices, interfaces, endpoints
> and ports so that USB devices can remain runtime-suspended when the
> system goes to a sleep state.
>
> Also enable runtime PM for endpoints, which is another requirement for
> the
Hi,
I have been looking at an issue where a phone that is the Function FS
host sometimes locks up and causes the function:
static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data
*io_data) in drivers/usb/gadget/function/f_fs.c to timeout after
MAX_SCHEDULE_TIMEOUT jiffies.
We are openi
Hi,
(it helps if you Cc the maintainer too :-)
On Tue, Mar 31, 2015 at 07:53:39PM +0100, Baxter, Jim wrote:
> I have been looking at an issue where a phone that is the Function FS
> host sometimes locks up and causes the function:
which USB controller ? which kernel ? which platform ?
> static
On Tue, Mar 31, 2015 at 10:02:52AM -0400, Alan Stern wrote:
> On Tue, 31 Mar 2015, Peter Chen wrote:
>
> > I reproduced this issue, I can't see the fifth endpoints during the SoFs
> > although the time to SoF boundary is about 800us, see attached.
> >
> > - At transaction 3749, the third UAC2 gad
Hello,
Thanks for your kindly support and code review.
It's my honor to work with you :D
Johan Hovold 於 2015/3/28 上午 12:17 寫道:
I'll apply the whole series now. Thanks again for fixing up this driver!
Johan
--
With Best Regards,
Peter Hung
--
To unsubscribe from this list: send the line "u
Hi Alan,
Thanks for the confirmative answer, since I suspect it's the bug
of the hub first, but all the three hubs at my hand report the same
status.
I can see why the hubs are reported as self powered, e.g. if there's
a device configured with max power equals to 120 mA, if the hub is
self powere
On Mon, 2015-03-30 at 16:10 +0200, Jiri Kosina wrote:
> On Mon, 30 Mar 2015, Oliver Neukum wrote:
>
> > During a stress test these mice kept dropping and reappearing
> > in runlevel 1 as opposed to 5.
> >
> > Signed-off-by: Oliver Neukum
>
> I am postponing all these before it is clarified that
16 matches
Mail list logo
