According to the datasheet, PHYPARAM1_PCS_TXDEEMPH is set as
6 bits [5:0]. Thus, the bit mask should be set as 0x3f, instead
of 0x1f.
Signed-off-by: Jingoo Han
---
These patches have a dependency on the patch ([PATCH] usb: phy:
samsung: Remove unnecessary lines of register bit definitions). [1]
According to the datasheet, PHYPARAM1_PCS_TXDEEMPH_3P5DB is a
correct name. Thus, a _3P5DB suffix for the PHYPARAM1_PCS_TXDEEMPH
register bit field definition is added.
In addition, PHYPARAM1_PCS_TXDEEMPH_3P5DB(_x) is added in order to
keep the same style, as other register bit field definitions a
On Fri, Aug 08, 2014 at 03:10:34AM +0800, Wang YanQing wrote:
> On Tue, Aug 05, 2014 at 03:54:08PM +0200, Johan Hovold wrote:
> > > > I noticed that setting direction to output and setting the gpio high has
> > > > no effect on the read-back value (i.e. I still read back 0) for my
> > > > pl2303hx
On Wed, Aug 06, 2014 at 08:46:44AM -0700, Brennan Ashton wrote:
> This VIA Telecom baseband processor is used is used by by u-blox in both the
> FW2770 and FW2760 products and may be used in others as well.
>
> This patch has been tested on both of these modem versions.
>
> Signed-off-by: Brennan
Hi,
On my Corsair K70 keyboard, when pressing some key and then the backslash
key (KEY_BACKSLASH) in rapid succession the backslash character will be
repeated three times.
This bug is discussed on the Corsair forums, and it seems the exact same
thing also happens with Gigabyte Osmium and QPAD MK8
Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt
context. This is not allowed as it might sleep. Also setting the clock
rate is unsafe to call from there for the same reason. Move clock
preparation and se
Hello,
The Logitech C615 works OK if moved away from a USB3 port into a
non-USB3 port.
So it appears a USB3 issue.
Is 'xhci_hcd :02:00.0: ERROR: unexpected command
completion code 0x11' a possible root cause?
My board has:
# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Famil
On 2014-08-08 13:24, Udo van den Heuvel wrote:
> unexpected command
> completion code 0x11
Is bug https://bugzilla.kernel.org/show_bug.cgi?id=70531 relevant here?
Kind regards,
Udo
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.k
This reverts commit 4a64783b66bbeed06a1f10ab56a1dd401dd5bfba.
---
Hello Peter,
I have seen this call is still returning EOPNOTSUPP which is also
returned by usb_gadget_connect and usb_gadget_disconnect if the pullup
function is not available. Should it not handle that case somehow special?
Is i
A: http://en.wikipedia.org/wiki/Top_post
Q: Were do I find info about this thing called top-posting?
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
A: No.
Q: Should I inclu
On Fri, Aug 08, 2014 at 11:15:00AM +0200, Fredrik Hallenberg wrote:
> Hi,
>
> On my Corsair K70 keyboard, when pressing some key and then the backslash
> key (KEY_BACKSLASH) in rapid succession the backslash character will be
> repeated three times.
>
> This bug is discussed on the Corsair forums
Thanks, I will try that list.
On Fri, Aug 8, 2014 at 3:29 PM, Greg KH wrote:
> On Fri, Aug 08, 2014 at 11:15:00AM +0200, Fredrik Hallenberg wrote:
>> Hi,
>>
>> On my Corsair K70 keyboard, when pressing some key and then the backslash
>> key (KEY_BACKSLASH) in rapid succession the backslash charac
On 08/08/2014 at 11:42:42 +0200, Ronald Wahl wrote :
> Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
> prepare clk before calling enable) added clock preparation in interrupt
> context. This is not allowed as it might sleep. Also setting the clock
> rate is unsafe to call
Dear Google User,
Attached to this e-mail is your official Google User Reward Promotion
notification for being an
active user of Google Services.
Best Regards,
Larry Page
Chairman Google UK.
©2014 Google Incorporation®
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" i
On Wed, Jul 30, 2014 at 1:38 PM, Paul Zimmerman
wrote:
>> From: linux-usb-ow...@vger.kernel.org
>> [mailto:linux-usb-ow...@vger.kernel.org] On Behalf Of dingu...@altera.com
>> Sent: Wednesday, July 30, 2014 8:21 AM
>>
>> Make dwc2_handle_common_intr call the gadget interrupt function when
>> ope
If the pending buffers in the queue could not be pushed to the udc
endpoint we have to cancel the uvc_queue. Otherwise the gadget will get
stuck on this error. This patch calls uvc_queue_cancel if usb_ep_queue
failed.
Signed-off-by: Michael Grzeschik
---
v1 -> v2:
- moved uvc_queue_cancel outsid
This patch adds ENUM_FMT as possible ioctl to the uvc v4l2 device.
That makes userspace applications with a generic IOCTL calling
convention make also use of it.
Signed-off-by: Michael Grzeschik
---
v1 -> v2:
- changed first switch case to simple if
- added separate function
- added descriptio
While sending bigger images it is better to use more isochronous
requests in flight. This patch bumps the default from 4 to 16.
Signed-off-by: Michael Grzeschik
---
drivers/usb/gadget/uvc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb
This series fixes a possible lock in the uvc-gadget.
It also adds ENUM_FMT to the v4l2 ioctl list. This
way it will be possible to use gstreamer with it.
At last we increase isoc requests in flight.
Cheers,
Michael
Michael Grzeschik (3):
usb: gadget/uvc: fix possible lockup in uvc gadget
usb:
Kever
On Thu, Aug 7, 2014 at 8:55 PM, Kever Yang wrote:
> This patch add compatible data for dwc2 controller found on
> rk3066, rk3188 and rk3288 processors from rockchip.
>
> Signed-off-by: Kever Yang
> Acked-by: Paul Zimmerman
> ---
>
> Changes in v5:
> - max_transfer_size change to 65535 to
On Fri, Aug 08, 2014 at 09:54:42AM +0200, Johan Hovold wrote:
> On Fri, Aug 08, 2014 at 03:10:34AM +0800, Wang YanQing wrote:
> > On Tue, Aug 05, 2014 at 03:54:08PM +0200, Johan Hovold wrote:
> > > > > I noticed that setting direction to output and setting the gpio high
> > > > > has
> > > > > no
From: Dinh Nguyen
The Host workqueue will not get initialized if the driver is configured for
peripheral mode only. Thus we need to check for wq_otg before calling
queue_work().
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/core_intr.c | 8 +---
1 file changed, 5 insertions(+), 3 deletio
From: Dinh Nguyen
Move suspend/resume code to common platform code.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/core.h | 6 ++
drivers/usb/dwc2/gadget.c | 4 ++--
drivers/usb/dwc2/platform.c | 23 +++
3 files changed, 31 insertions(+), 2 deletions(-)
diff -
From: Dinh Nguyen
Move the "samsung,s3c6400-hsotg" binding as the probe function in the gadget
driver will get removed when the dual-role driver is implemented.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/gadget.c | 1 -
drivers/usb/dwc2/platform.c | 1 +
2 files changed, 1 insertion(+),
From: Dinh Nguyen
Add the proper init calls for either host, gadget or both in platform.c
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/core.h | 13 +
drivers/usb/dwc2/gadget.c | 2 +-
drivers/usb/dwc2/platform.c | 28
3 files changed, 38 inser
From: Dinh Nguyen
Since the dwc2 hcd driver is currently not looking for a clock node during
init, we should not completely fail if there isn't a clock provided.
Add a check for a valid clock before calling clock functions.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/gadget.c | 36
From: Dinh Nguyen
Move spin_lock_init to common location for both host and gadget.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/hcd.c | 1 -
drivers/usb/dwc2/platform.c | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
i
From: Dinh Nguyen
Initialize the USB driver to peripheral mode when a B-Device connector
is attached.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/hcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 4d918ed..07a7bcd 100644
--- a/dr
From: Dinh Nguyen
Adds the gadget data structure and appropriate data structure pointers
to the common dwc2_hsotg data structure. To keep the driver data
dereference code looking clean, the gadget variable declares are only available
for peripheral and dual-role mode. This is needed so that the d
From: Dinh Nguyen
Update the dwc2 wakeup and suspend interrupt functions to use call_gadget
when the IP is in peripheral mode.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/core_intr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_
From: Dinh Nguyen
Update DWC2 kconfig and makefile to support dual-role mode. The platform
file will always get compiled for the case where the controller is directly
connected to the CPU. So for loadable modules, only dwc2.ko is needed.
Signed-off-by: Dinh Nguyen
---
v3: Add USB_GADGET=y and U
From: Dinh Nguyen
Initialize the spinlock here as the original spinlock in the host driver
has been removed.
Signed-off-by: Dinh Nguyen
---
drivers/usb/dwc2/pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index c291fca..faacac9 100644
-
From: Dinh Nguyen
Hello,
This is version 3 of the patch series that combines the dwc2 gadget and host
driver into a single dual role driver. Here are the main differences from V2:
- less code change:
v3: 9 files changed, 340 insertions(+), 335 deletions(-)
v2: 9 files changed, 3
From: Dinh Nguyen
Make dwc2_handle_common_intr call the gadget interrupt function when operating
in peripheral mode. Remove the spinlock functions in s3c_hsotg_irq as
dwc2_handle_common_intr() already has the spinlocks.
Remove duplicate interrupt conditions that was in gadget, as those are handl
On ven., 2014-08-08 at 14:36 -0700, Greg KH wrote:
> On Fri, Aug 08, 2014 at 11:27:06PM +0200, Yves-Alexis Perez wrote:
> > On ven., 2014-08-08 at 14:20 -0700, Greg KH wrote:
> > > > Actually, since it's a module parameter, it doesn't seem possible to
> > > > toggle it without reloading the module
On Fri, 8 Aug 2014, Yves-Alexis Perez wrote:
> On ven., 2014-08-08 at 14:36 -0700, Greg KH wrote:
> > On Fri, Aug 08, 2014 at 11:27:06PM +0200, Yves-Alexis Perez wrote:
> > > On ven., 2014-08-08 at 14:20 -0700, Greg KH wrote:
> > > > > Actually, since it's a module parameter, it doesn't seem possi
On ven., 2014-08-08 at 18:17 -0400, Alan Stern wrote:
> The authorized_default module parameter affects USB buses when they
> are
> discovered and registered; after that it has no effect. Therefore to
> accomplish what you want, you need to put
> "usbcore.authorized_default=0" in the kernel's boot
On Sat, 9 Aug 2014, Yves-Alexis Perez wrote:
> On ven., 2014-08-08 at 18:17 -0400, Alan Stern wrote:
> > The authorized_default module parameter affects USB buses when they
> > are
> > discovered and registered; after that it has no effect. Therefore to
> > accomplish what you want, you need to p
On ven., 2014-08-08 at 18:26 -0400, Alan Stern wrote:
> I'm not sure what you mean. You can toggle these values at any time,
> but toggling them may not accomplish anything useful. What do you
> want
> to accomplish?
The point would be to prevent new usb device to be plugged while a
system is
On Sat, 9 Aug 2014, Yves-Alexis Perez wrote:
> On ven., 2014-08-08 at 18:26 -0400, Alan Stern wrote:
> > I'm not sure what you mean. You can toggle these values at any time,
> > but toggling them may not accomplish anything useful. What do you
> > want
> > to accomplish?
>
> The point would b
On Thu, Aug 7, 2014 at 1:16 PM, Greg KH wrote:
>
> The top of the MAINTAINERS should have this information, look in the S:
> Status section about what type of category you are in.
>
> Basically I'd like you to be the one to handle patches that are sent in
> for the code, just by reviewing them, yo
PL2303 USB Serial devices always has GPIOs, this patch add
generic gpio support interfaces for pl2303 USB Serial devices
in pl2303_type_data and pl2303_serial_private, then use them
to add GPIOs support for one type of them, PL2303HXA.
Known issue:
If gpios are in use(export to userspace through s
42 matches
Mail list logo
