Thip patchset avoids accessing auto-suspended device in ioctl path,
which is generally triggered by some network utility(ethtool, ifconfig,
...)
Most of network devices have the problem, but as discussed in the
thread:
http://marc.info/?t=13505486063&r=1&w=2
the problem should be sol
This patch introduces the below two helpers to prepare for solving
the usbnet runtime PM problem, which may cause some network utilities
(ifconfig, ethtool,...) touch a suspended device.
usbnet_read_cmd_nopm()
usbnet_write_cmd_nopm()
The above two helpers should be called by usbne
This patch applies the introduced usbnet_read_cmd_nopm() and
usbnet_write_cmd_nopm() in the callback of resume and suspend
to avoid deadlock if USB runtime PM is considered into
usbnet_read_cmd() and usbnet_write_cmd().
Cc: Steve Glendinning
Signed-off-by: Ming Lei
---
drivers/net/usb/smsc75xx.
This patch fixes memory leak in smsc95xx_suspend.
Also, it isn't necessary to bother mm to allocate 8bytes/16byte,
and we can use stack variable safely.
Cc: Steve Glendinning
Signed-off-by: Ming Lei
---
drivers/net/usb/smsc95xx.c | 12 +---
1 file changed, 9 insertions(+), 3 deletion
This patch applies the introduced usbnet_read_cmd_nopm() and
usbnet_write_cmd_nopm() in the callback of resume and suspend
to avoid deadlock if USB runtime PM is considered into
usbnet_read_cmd() and usbnet_write_cmd().
Cc: Steve Glendinning
Signed-off-by: Ming Lei
---
drivers/net/usb/smsc95xx.
This patche gets the runtime PM reference count before calling
usbnet_read[write]_cmd, and puts it after completion of the
usbnet_read[write]_cmd, so that the usb control message can always
be sent to one active device in the non-PM context.
Signed-off-by: Ming Lei
---
drivers/net/usb/usbnet.c |
On Sun, Nov 4, 2012 at 1:58 PM, David Miller wrote:
>
> This gets rejects, you didn't have your net-next tree uptodate
> enough.
Sorry, I just rebased that on 3.7.0-rc3-next-20121102.
The new patchset which is against the latest net-next has been sent out.
Thanks,
--
Ming Lei
--
To unsubscribe
Well,
The issue appeared again.
irq 18 was disabled, one pwc webcam was on that irq.
This time on new hardware: Gigabyte F2A85X-UP4 with A10-5800K APU.
The box was busy with it's raid10 array, this time, by running bonnie++;
also a raid-check was in progress. (unknown at the time)
So what does t
Hello.
On 04-11-2012 15:16, Ming Lei wrote:
s/make/wake/ in the subject?
This patche gets the runtime PM reference count before calling
s/patche/patch/
usbnet_read[write]_cmd, and puts it after completion of the
usbnet_read[write]_cmd, so that the usb control message can always
Hi all,
I've a strange problem with the USB subsystem, under
kernel 3.6, this was not happening under 3.5.
The system is Fedora, so I'll use their kernel numbers,
and the related bug report is this:
https://bugzilla.redhat.com/show_bug.cgi?id=866166
I've some USB hubs cascaded in order to have 1
Hum, you are right. It's pain to send anything via thunderbird.
Resending.
br,
-- dmytro
On Fri, Nov 2, 2012 at 12:46 PM, Sergei Shtylyov wrote:
> Hello.
>
>
> On 01-11-2012 19:16, Dmytro Milinevskyy wrote:
>
>> Convert USB descriptor's fields to CPU byte order before using locally in
>> USB
>>
Convert USB descriptor's fields to CPU byte order before using locally in USB
NCM gadget driver.
Tested on MIPS32 big-endian device.
Signed-off-by: Dmytro Milinevskyy
---
drivers/usb/gadget/f_ncm.c | 12
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gad
ACPI provide "_PLD" and "_UPC" aml methods to describe usb port
visibility and connectability. This patch is to use those information
to change ehci root hub descriptors and set usb hub port's DeviceRemovable
in the hub_configure(). When hub descriptor request is issued at first time,
usb port devi
To show the relationship between usb port and child device,
add link file "port" under usb device's sysfs directoy and
"device" under usb port device's sysfs directory. They are linked
to each other.
Signed-off-by: Lan Tianyu
---
drivers/usb/core/hub.c | 22 ++
1 file chang
Change since v1:
[PATCH 3] Rename link file's name "child" to "device", add check of
return value of
sysfs_create_link() and handle error return value properly.
Change since v2:
[PATCH 1] fix a logic backward problem. Add changelog about change ehci
root hub descriptors based on A
This patch is to set xhci root hub's DeviceRemovable according to usb port's
connect type which currently comes from ACPI information rather than xhci PORTSC
register due to Windows prefers to ACPI information. If ACPI information was
different with PORTSC, there would be a warning.
Signed-off-by:
Some platforms provide usb port connect types through ACPI. This
patch is to add this new attribute to expose these information
to user space.
Signed-off-by: Lan Tianyu
---
Documentation/ABI/testing/sysfs-bus-usb |9 +++
drivers/usb/core/hub.c | 43
On Sat, Nov 03, 2012 at 09:14:08PM +0100, Miguel Dardenne wrote:
> On 2012-11-03 17:50, Alan Stern wrote:
> >> I get a USB disconnect of my external USB HDD about once per day.
> >> Enabling USB debug in the kernel shows the first error as 'ehci_hcd
> >> detected XactErr'. It happens only when the
New small and portable routers from TP-LINK (TL-MR3020 and TL-MR3040)
incorporate this Atheros chipset.
On Linux 3.3.8 (and earlier kernels like 3.2.5) we are finding
data transfer issues with USB 1.1 devices.
The device (a Samsung BlackJack phone working as a 3G modem) can pass
data to the I
On Sun, 4 Nov 2012, Piergiorgio Sartor wrote:
> Hi all,
>
> I've a strange problem with the USB subsystem, under
> kernel 3.6, this was not happening under 3.5.
> The system is Fedora, so I'll use their kernel numbers,
> and the related bug report is this:
>
> https://bugzilla.redhat.com/show_bu
On Sun, Nov 04, 2012 at 03:07:35PM -0500, Alan Stern wrote:
[...]
> The first thing you should do is test a 3.6 kernel with
> CONFIG_USB_DEBUG enabled and post the dmesg log showing the problem.
> That will help indicate what is going wrong.
I guess this is a compile time option.
Is it any run-
On Sun, Nov 04, 2012 at 03:07:35PM -0500, Alan Stern wrote:
[...]
> The first thing you should do is test a 3.6 kernel with
> CONFIG_USB_DEBUG enabled and post the dmesg log showing the problem.
> That will help indicate what is going wrong.
>
> If that doesn't suggest a solution, the next thin
It looks like these patches were not a good idea, because in each case the
printk provides an error level, and WARN then provides another one.
Sorry for the noise.
julia
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
Bug Short Description: 058f:9360 8GB MicroSD card not recognized in
Alcor Micro Corp. 8-in-1 Media Card Reader
When I insert a 8GB MicroSD into my integrated Alcor Micro Corp.
8-in-1 Media Card Reader using Oneiric it is not recognized. However,
the same MicroSD card works in a different laptop's
On Mon, Nov 5, 2012 at 4:17 AM, Piergiorgio Sartor
wrote:
>
> This seems a bit out of reach, for several reasons.
> I'll have to use a Fedora kernel, which might have its
> own patches and I suspect things will become complicated
> beyond my capability to manage them.
> I might try on a different
Current rcar-phy driver used iowerite32/ioread32,
but it cause compile error on some architectures.
This patch used writel/readl and HAS_IOMEM to solve this issue.
drivers/usb/phy/rcar-phy.c: In function 'rcar_usb_phy_init':
drivers/usb/phy/rcar-phy.c:75:3: error: implicit declaration of function\
On Sun, 4 Nov 2012, Piergiorgio Sartor wrote:
> On Sun, Nov 04, 2012 at 03:07:35PM -0500, Alan Stern wrote:
> [...]
> > The first thing you should do is test a 3.6 kernel with
> > CONFIG_USB_DEBUG enabled and post the dmesg log showing the problem.
> > That will help indicate what is going wron
On Sun, 4 Nov 2012, Dan 'Da Man' wrote:
> Bug Short Description: 058f:9360 8GB MicroSD card not recognized in
> Alcor Micro Corp. 8-in-1 Media Card Reader
>
> When I insert a 8GB MicroSD into my integrated Alcor Micro Corp.
> 8-in-1 Media Card Reader using Oneiric it is not recognized. However,
>
From: harvey.yang
Signed-off-by: harvey.yang
---
drivers/staging/usbip/usbip_event.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/usbip/usbip_event.c
b/drivers/staging/usbip/usbip_event.c
index d332a34..668f8e0 100644
--- a/drivers/staging/usbip/us
On Mon, Nov 05, 2012 at 12:50:26PM +0800, Harvey Yang wrote:
> From: harvey.yang
>
>
> Signed-off-by: harvey.yang
> ---
> drivers/staging/usbip/usbip_event.c |2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/usbip/usbip_event.c
> b/drivers/staging
Hi,
> int happened = 0;
>
> - spin_lock(&ud->lock);
> if (ud->event != 0)
> happened = 1;
> - spin_unlock(&ud->lock);
>
> return happened;
I am guessing locking was intended to protect ud->event along with
happened so that (checking the value of
I think no need to make 'happened' static as we just check 'ud->event'
feild. Maybe making this function inline would make more sense.
inline int usbip_event_happened(struct usbip_device *ud)
{
return ud->event ? 1 : 0;
}
Thanks
Harvey
On Mon, Nov 5, 2012 at 1:34 PM, Prashant Shah wrot
On Sun, Nov 04, 2012 at 02:42:32PM -0500, Ashok Rao wrote:
> New small and portable routers from TP-LINK (TL-MR3020 and TL-MR3040)
> incorporate this Atheros chipset.
> On Linux 3.3.8 (and earlier kernels like 3.2.5) we are finding
> data transfer issues with USB 1.1 devices.
>
> The device (
On Mon, Nov 05, 2012 at 08:39:43AM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
> if the gpio is not valid complain
>
> since 3285e0ec088febc5a88f57ddd78385a7da71476c
> ARM: at91/udc: use gpio_is_valid to check the gpio
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
> Cc: linux-usb@vger.
34 matches
Mail list logo
