On Wed, Sep 19, 2018 at 02:36:17PM +0300, Heikki Krogerus wrote:
> > I noticed that bits [21:20] are set as 0b11. The datasheet describes
> > these bits as software configuration of the OTG_ID signal functionality.
> > With these bits set, does that mean that the OS is expected to be
> > configurin
On Fri, Sep 14, 2018 at 02:59:49PM -0700, Rob Weber wrote:
> On Fri, Sep 14, 2018 at 11:09:15AM +0300, Heikki Krogerus wrote:
> > Adding Hans. Hans has become something of a Cherry Trail expert.
>
> Hello Hans. Yesterday I was reading through your blog posts that describe
> your work with the GPD
Hi Rob,
Adding Hans. Hans has become something of a Cherry Trail expert.
On Thu, Sep 13, 2018 at 03:40:12PM -0700, Rob Weber wrote:
> Hi linux-usb,
>
> I'm currently bringing up a custom board that uses a CherryTrail
> processor and I'm having quite a bit of trouble accessing the dual-role
> por
On Fri, Sep 14, 2018 at 09:00:30AM +0200, Greg KH wrote:
> > I'm running a 4.9.115 kernel built using Yocto with a few patches applied
> > to enable HDMI audio.
>
> 4.9 is really old by now, and lots and lots of USB-C and dwc3 and xhci
> changes have happened in the almost 2 years since that kerne
On Thu, Sep 13, 2018 at 03:40:12PM -0700, Rob Weber wrote:
> Hi linux-usb,
>
> I'm currently bringing up a custom board that uses a CherryTrail
> processor and I'm having quite a bit of trouble accessing the dual-role
> port from Linux.
>
> Our system includes two USB 3.0-capable ports with Type-
Hi linux-usb,
I'm currently bringing up a custom board that uses a CherryTrail
processor and I'm having quite a bit of trouble accessing the dual-role
port from Linux.
Our system includes two USB 3.0-capable ports with Type-C connectors.
One port is designed to be a host-only port (downstream-fac
