buffer anything
> up, but passes along whatever the device sends it, and is sent to it
to the device.
Your answer satisfies me.
Thanks for your availability and answers
Best regards,
Laurent
Le 18/02/2015 17:06, Greg KH a écrit :
On Wed, Feb 18, 2015 at 11:15:57AM +0100, faivre.laur...@lapo
The ftdi_sio driver is the correct driver for this device, please use that one.
OK, I use it now
With this same device?
No, but for the same application
Are you sure you don't have hardware flow control enabled? It's a
common mistake with serial devices.
no flow control needed, no flow co
id "by hand", I can read data but not at the right speed
(and number of bits by characters and parity)
with stty some parameters are rejected : 1200 cs7 and parenb (-parenb
seems to be accepted)
Le 16/02/2015 20:47, Greg KH a écrit :
On Sun, Feb 15, 2015 at 11:10:05AM +0100, faivre.laur
Hi,
just a remark, in the dmesg result, there is no lines likes :
usb 1-1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.3: Setting MaxPacketSize 64
Is this normal ?
Thanks
Le 15/02/2015 11:10, faivre.laur...@laposte.net a écrit :
Thanks for your reply.
If I
n Sat, Feb 14, 2015 at 07:26:20PM +0100, faivre.laur...@laposte.net wrote:
Hi !
I try to use a usb-serial converter and i can't set the baud rate (and other
stuff) on the ttyUSB0.
The converter can be see on this page (Version USB : 20.00 €) :
http://www.domotibox.com/solarbox/?section=Boutique
There
Hi !
I try to use a usb-serial converter and i can't set the baud rate (and
other stuff) on the ttyUSB0.
The converter can be see on this page (Version USB : 20.00 €) :
http://www.domotibox.com/solarbox/?section=Boutique
There is some data from my system (raspberry pi b+, raspbian) :
$ una
