> I have problems to get my USB3 cardreader to work reliably when connected to
> the USB3 port. Due to lack of other USB3 devices I don't know if it is the
> cardreader or the USB3 host (NEC uPD720200) but the cardreader always works
> reliable when connected to USB2.
I've noticed about the same t
>> Doesn't this look alot like the problems I had ? :|
>> Altough I still find weird the fact that the connection to my laptop
>> worked just fine, but not in the asrock ! :|
>
> The same happened to me in another laptop, which only has USB2 ports.
> I still see problems on this laptop on the USB2
> So I tried everything, eventually updated the firmware, but in the end
> it turns out it was the cable. With the bad cable it seems when
> operating in USB2 mode it tends to work fine, which explains a lot.
>
> Anyway, I went back to 3.6.2 without the lpm patches and it still works fine
> :)
>
>
> We are working with computers. Weird stuff is not supposed to happen. But
> it does. Occasionally, this needs to be remembered, as it does
> occasionally cause real-world problems and is often the likely explanation
> for what is otherwise inexplicable. Thus, sooner or later some old geezer
> com
> The only solution I see is to buy something else, like an Asus
> EB1501P-B057E .. I need something small and fast enough .. :| Maybe
> any other recommendations ? ( other root chipset / atom cpu .. small
> powered .. etc. )
DON'T KILL ME ! .. I got the best cables I could get my hands on (
doubl
The only solution I see is to buy something else, like an Asus
EB1501P-B057E .. I need something small and fast enough .. :| Maybe
any other recommendations ? ( other root chipset / atom cpu .. small
powered .. etc. )
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the bo
n a car for the
> trip. The board got warm enough for the solder in that joint to expand
> enough for startup, while en route to the shop.
>
> Thus, I definitely do encourage you to check for hardware or cabling
> problems before deciding to buy additional equipment as a workarou
> They're the same chipset. There's minor differences in the PCI
> capabilities, but not much else. It could be something electrically
> wrong with the AsRock system, I suppose. That's possible if you see
> the errors popping up erratically.
>
> Any chance you can exchange the AsRock system?
No
> Since you are using the same live CD on both computers, this has to be
> caused by a difference in the hardware. What do "lspci -vvv" and
> "lspci -vvv -n" show on the two computers?
http://d3xt3r01.tk/~dexter/usbmon/asrock_lspci
http://d3xt3r01.tk/~dexter/usbmon/vaio_lspci
--
To unsubscribe fr
>> Adrian Sandu wrote:
>>> I tried with a 3.3.8 , same thing happened. I don't understand why my
>>> gentoo (asrock) fails and fedora(laptop) didn't ! :|
Tried to use the live cd on my laptop, can't reproduce it in any way
on my computer ..
Using the same
> Adrian Sandu wrote:
>> I tried with a 3.3.8 , same thing happened. I don't understand why my
>> gentoo (asrock) fails and fedora(laptop) didn't ! :|
>
> Try what Alan suggested, start the Gentoo userland with the Fedora
> kernel.
I tried booting a Fedora-17-x86
>> I tried with a 3.3.8 , same thing happened. I don't understand why my
>> gentoo (asrock) fails and fedora(laptop) didn't ! :|
>> Why ? What causes it to shutdown ? It can copy to/from drives ( in the
>> hub or directly in the root hub ) .. but what makes it fail sometimes
>> :|
>
> If we knew th
>> Anything else I can help with ? :| I'm stuck .. dunno what to test
>> more or what else helpfull info I could give ya' guys ..
>
> You could run a test with a 3.3 kernel, as Sarah asked earlier. Other
> than that, I can't think of anything. Maybe Sarah will come up with a
> patch for you to tr
On Wed, Sep 26, 2012 at 8:16 PM, Adrian Sandu wrote:
> 2012-09-26T20:13:09.700606+03:00 d3xt3r01 kernel: [ 2466.455403] usb
> 3-1.1: reset SuperSpeed USB device number 14 using xhci_hcd
> 2012-09-26T20:13:09.713629+03:00 d3xt3r01 kernel: [ 2466.468373]
> xhci_hcd :0
03:00 d3xt3r01 kernel: [ 2501.759654]
end_request: I/O error, dev sdb, sector 208112
2012-09-26T20:13:45.020696+03:00 d3xt3r01 kernel: [ 2501.775198] usb
3-1.1: USB disconnect, device number 14
On Wed, Sep 26, 2012 at 7:59 PM, Adrian Sandu wrote:
> On Wed, Sep 26, 2012 at 5:50 PM, Alan Ster
On Wed, Sep 26, 2012 at 5:50 PM, Alan Stern wrote:
> On Tue, 25 Sep 2012, Sarah Sharp wrote:
>
>> Alan, I'm wondering if the xHCI ring expansion is causing issues with
>> USB hard drives under xHCI. Testing with a Buffalo USB 3.0 hard drive
>> with an NEC uPD720200 xHCI host, I see that the usb-s
> After each test I've only plugged ou the drive from the hub ( the hub
> remained connected to the computer )
> Results: Directory indexing enabled .. http://d3xt3r01.tk/~dexter/usbmon/
Nevermind my last email .. seems I've been catting the wrong 9u ! :|
the files seem too small :| Will redo ever
On Tue, Sep 25, 2012 at 9:26 AM, Adrian Sandu wrote:
> On Tue, Sep 25, 2012 at 12:38 AM, Sarah Sharp
> wrote:
>> Ok, so 3.4.11 doesn't work, and the log file was from 3.5.
>
> If you want I can provide a 3.4 log...
>
>> If it's not LPM, I'm rea
On Tue, Sep 25, 2012 at 12:38 AM, Sarah Sharp
wrote:
> Ok, so 3.4.11 doesn't work, and the log file was from 3.5.
If you want I can provide a 3.4 log...
> If it's not LPM, I'm really out of ideas. I would suggest getting
> another USB 3.0 hub, but I know that basically the VIA chipset is the
>
> I'll whip up some patches that allow you to disable USB 3.0 Link PM for
> the VIA hub and we'll see if that helps. Or you could downgrade to the
> 3.4 kernel and see if that helps, since USB 3.0 Link PM went into 3.5.
Thanks Sarah. I tried in 3.4.11 to .. about the same thing ..
http://d3xt3r01
> You should use Reply-To-All so that your messages get sent to the
> mailing list as well as to me.
Will do from now on :)
>
> In the new file you wrote: "launch cat of 9u, start copying a file to
> /dev/sdb1 ( using mc for example )". Where was this file stored? Was
> it on /dev/sdd1?
>
> My
Hi peeps,
For the past day or so I've been trying to get my usb hub to work with
my asrock 152d and failed.
After a while it crossed my mind to try it out on my vaio vpcf13m1e's
usb3 port .. worked like a charm.
Both the nettop and my laptop seem to have the same usb3 chipset: "NEC
Corporation uPD
22 matches
Mail list logo
