Add support for the net stats64 counters to the usbnet core. With that
in place put the hooks into every usbnet driver to use it.
This is a strait forward addition of 64bit counters for RX and TX packet
and byte counts. It is done in the same style as for the other net drivers
that support stats64
Hi,
On 3/30/2017 2:42 PM, Felipe Balbi wrote:
>
> Hi,
>
> Minas Harutyunyan writes:
>> After data out stage gadget driver should not initate ZLP on control EP,
>> because it is up to function driver.
>
> not true always, depends on return value from ->setup(). Which problem
> did you have? Which
On 03/30/2017 02:27 AM, Felipe Balbi wrote:
>
> Hi
>
> Roger Quadros writes:
> For something that simple, we wouldn't even need to use OTG FSM layer
> because that brings no benefit for such a simple requirement.
no no. I think you got it wrong. I'm not using the OTG FSM layer at
On 03/31/2017 04:04 PM, John Stultz wrote:
> On Thu, Mar 2, 2017 at 12:00 PM, John Stultz wrote:
>> Hey John,
>> We've noticed that when using usb ethernet adapters on HiKey, we
>> occasionally see errors like:
>>
>> dwc2 f72c.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set,
>> but reas
On 03/20/2017 07:24 PM, Vivek Gautam wrote:
This patch series adds couple of PHY drivers for Qualcomm chipsets.
a) qcom-qusb2 phy driver: that provides High Speed USB functionality.
b) qcom-qmp phy driver: that is a combo phy providing support for
USB3, PCIe, UFS and few other controllers.
On 03/29/2017 08:23 PM, John Stultz wrote:
> I had seen some odd behavior with HiKey's usb-gadget interface
> that I finally seemed to have chased down. Basically every other
> time I plugged in the OTG port, the gadget interface would
> properly initialize. The other times, I'd get a big WARN_ON
>
On Sun, Apr 2, 2017 at 3:00 PM, Leif Neland wrote:
> There is a patch
>
> https://github.com/karlp/ch341-linux/blob/master/0001-usb-serial-ch341-Add-parity-support.patch
>
> which enables parity selection for the ch341 USB-RS485 adapter.
>
> From: Karl Palsson
> Date: Tue, 18 Mar 2014 23:33:27 +0
On Thu, 30 Mar 2017 07:45:35 -0300
Mauro Carvalho Chehab wrote:
> Currently, the script just assumes to be called at
> Documentation/sphinx/. Change it to work on any directory,
> and make it abort if something gets wrong.
>
> Also, be sure that both parameters are specified.
>
> That should av
On Sun, 2 Apr 2017, Guan Xin wrote:
> Bus 002 Device 004: ID 0bc2:2322 Seagate RSS LLC
> Device Descriptor:
> bLength18
> bDescriptorType 1
> bcdUSB 2.10
> bDeviceClass0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPa
There is a patch
https://github.com/karlp/ch341-linux/blob/master/0001-usb-serial-ch341-Add-parity-support.patch
which enables parity selection for the ch341 USB-RS485 adapter.
From: Karl Palsson
Date: Tue, 18 Mar 2014 23:33:27 +
This adapter is available for cheap on eBay.
The patch made
On Sun, 2017-04-02 at 18:57 +0200, Leif Neland wrote:
> There is a patch
> https://github.com/karlp/ch341-linux/blob/master/0001-usb-serial-ch341-Add-parity-support.patch
> which enables parity selection for the ch341 USB-RS485 adapter.
>
> From: Karl Palsson Date: Tue, 18 Mar 2014 23:33:27
> +00
Bus 002 Device 004: ID 0bc2:2322 Seagate RSS LLC
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize064
idVendor 0x0bc2 Seagate
On Sun, 2 Apr 2017, Guan Xin wrote:
> When used through a USB-SATA bridge, disk capacity and optimal IO size
> are reported one sector too less. e.g.,
>
> with USB-SATA bridge:
>
> dmesg:
> [ 4542.387857] usb 3-1.2: Product: Expansion
> [ 4542.387871] usb 3-1.2: Manufacturer: Seagate
> [ 4542.38
When used through a USB-SATA bridge, disk capacity and optimal IO size
are reported one sector too less. e.g.,
with USB-SATA bridge:
dmesg:
[ 4542.387857] usb 3-1.2: Product: Expansion
[ 4542.387871] usb 3-1.2: Manufacturer: Seagate
[ 4542.387874] usb 3-1.2: SerialNumber:
[ 4542.439329]
14 matches
Mail list logo
