hi,
On Fri, 2015-07-10 at 07:10 +0200, Sascha Hauer wrote:
> On Wed, Jul 08, 2015 at 05:41:03PM +0800, Chunfeng Yun wrote:
> > add a DT binding documentation of usb3.0 phy for MT65xx
> > SoCs from Mediatek.
> >
> > Signed-off-by: Chunfeng Yun
> > ---
> > .../devicetree/bindings/usb/mt65xx-u3phy.
This driver is for Fintek F81532/F81534 USB to Serial Ports IC.
Features:
1. F81534 is 1-to-4 & F81532 is 1-to-2 serial ports IC
2. Support Baudrate from B50 to B150 (excluding B100).
3. The RTS signal can be transformed their behavior with
configuration by default ioctl TIOCGRS485/TIOC
hi Roger,
On Fri, 2015-07-10 at 11:31 +0300, Roger Quadros wrote:
> Hi,
>
> On 08/07/15 12:41, Chunfeng Yun wrote:
> > add a DT binding documentation of xHCI host controller for the
> > MT8173 SoC from Mediatek.
> >
> > Signed-off-by: Chunfeng Yun
> > ---
> > .../devicetree/bindings/usb/mt8173
hi Roger,
On Fri, 2015-07-10 at 11:31 +0300, Roger Quadros wrote:
> Hi,
>
> On 08/07/15 12:41, Chunfeng Yun wrote:
> > add a DT binding documentation of xHCI host controller for the
> > MT8173 SoC from Mediatek.
> >
> > Signed-off-by: Chunfeng Yun
> > ---
> > .../devicetree/bindings/usb/mt8173
On Mon, Jul 13, 2015 at 12:14:43PM -0700, Andrew Bresticker wrote:
> Hi Roger,
>
> On Wed, Jul 8, 2015 at 3:19 AM, Roger Quadros wrote:
> > Usage model:
> > ---
> >
> > - The OTG controller device is assumed to be the parent of
> > the host and gadget controller. It must call usb_otg_regi
On Mon, Jul 13, 2015 at 01:13:54PM +0300, Roger Quadros wrote:
> Peter,
>
> On 13/07/15 04:58, Peter Chen wrote:
> > On Wed, Jul 08, 2015 at 01:19:30PM +0300, Roger Quadros wrote:
> >> This is to prevent missing symbol build error if OTG is
> >> enabled (built-in) and HCD core (CONFIG_USB) is modu
Hi Geert-san,
> Sent: Tuesday, July 14, 2015 1:52 AM
>
> Hi Greg,
>
> On Mon, Jul 13, 2015 at 6:19 PM, Greg KH wrote:
> > On Mon, Jul 13, 2015 at 06:10:05PM +0900, Yoshihiro Shimoda wrote:
> >> The dma_map_single and dma_unmap_single should set "gadget->dev.parent"
> >> instead of "&gadget->dev
On Thu, Jul 09, 2015 at 03:18:37PM +0800, Li Jun wrote:
...
>
> This is a follow-up of Macpaul Lin's previous patchset to resolve usb
> gadget driver working with OTG 2.0, and set otg features by not only
> usb driver config but also usb hardware property in DT, main changes:
> 1. Add usb_otg20_de
Thanks Benson.
To be accurate, Mathias mentioned consolidating this patch into the PME quirk
would be simpler and smaller.
Raj
-Original Message-
From: ble...@google.com [mailto:ble...@google.com] On Behalf Of Benson Leung
Sent: Monday, July 13, 2015 4:08 PM
To: Mani, Rajmohan
Cc: Nyman,
On Mon, Jul 13, 2015 at 4:03 PM, Mani, Rajmohan wrote:
> I implemented the original patch exactly the way you mentioned that would i)
> use a new quirk ii) do the vendor / device check within xhci_pci_quirks() and
> iii) do this in a separate function. When I sent this out internally to
> Mathi
Hi Benson, Please see responses inline.
-Original Message-
From: ble...@google.com [mailto:ble...@google.com] On Behalf Of Benson Leung
Sent: Monday, July 13, 2015 3:45 PM
To: Mani, Rajmohan
Cc: Nyman, Mathias; linux-usb@vger.kernel.org; ejcar...@chromium.org
Subject: Re: [PATCH] xhci: Wor
Thanks Rajmohan. Comments inline.
On Thu, Jul 9, 2015 at 6:17 PM, wrote:
> From: Rajmohan Mani
>
> The xHCI in Intel CherryView / Braswell Platform requires
> a driver workaround to get xHCI D3 working. Without this
> workaround, xHCI might not enter D3.
>
> Workaround is to configure SSIC PORT
Hi Roger,
On Wed, Jul 8, 2015 at 3:19 AM, Roger Quadros wrote:
> Usage model:
> ---
>
> - The OTG controller device is assumed to be the parent of
> the host and gadget controller. It must call usb_otg_register()
> before populating the host and gadget devices so that the OTG
> core is aw
Hi,
On Mon, Jul 13, 2015 at 05:50:49PM +, John Youn wrote:
> On 7/11/2015 12:29 PM, Felipe Balbi wrote:
> > Hi,
> >
> > On Sat, Jul 11, 2015 at 05:17:32PM +, Subbaraya Sundeep Bhatta wrote:
> >> Hi Felipe,
> >>
> >> Just an update on this.
> >>
> >> I'm trying to get t
On Sun, 2015-06-28 at 13:28 -0500, Peter E. Berger wrote:
> From: "Peter E. Berger"
>
> I found that when using newer Edgeport devices such as the EP/416,
> idle ports are regularly bounced (disconnected and then reconnected).
> I discussed this with the manufacturer (Digi International) and lear
On 7/11/2015 12:29 PM, Felipe Balbi wrote:
> Hi,
>
> On Sat, Jul 11, 2015 at 05:17:32PM +, Subbaraya Sundeep Bhatta wrote:
>> Hi Felipe,
>>
>> Just an update on this.
>>
>> I'm trying to get this working with our latest IP with dwc3 from
>> your testing/next branch. It
Hi Sergei,
On 13 July 2015 18:10, Sergei wrote:
> On 07/13/2015 07:55 PM, Phil Edworthy wrote:
>
> >>> Instead of statically selecting the PHY connection to either the
> >>> USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
> >>> dts to specifiy gpio pins for the vbus
On 07/13/2015 07:55 PM, Phil Edworthy wrote:
Instead of statically selecting the PHY connection to either the
USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
dts to specifiy gpio pins for the vbus and id signals. Additional
These GPIOs don't have anything to do with t
Hi Sergei,
On 13 July 2015 17:37, Sergei wrote:
> On 07/13/2015 06:02 PM, Phil Edworthy wrote:
>
> > Instead of statically selecting the PHY connection to either the
> > USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
> > dts to specifiy gpio pins for the vbus and id
Hi Greg,
On Mon, Jul 13, 2015 at 6:19 PM, Greg KH wrote:
> On Mon, Jul 13, 2015 at 06:10:05PM +0900, Yoshihiro Shimoda wrote:
>> The dma_map_single and dma_unmap_single should set "gadget->dev.parent"
>> instead of "&gadget->dev" in the first argument because the parent has
>> a udc controller's
On Mon, Jul 13, 2015 at 06:08:50PM +0200, Michał Pecio wrote:
> > Commit 57ce61aad748 might be helpful... ;)
> >
> > Good luck,
> > Frank
> >
> >
>
> Pretty much the same thing I have done, except that I didn't notice that
> 0 = 512 :)
>
> Apparently, 57ce61aad748 fell victim of a mass-revert
On 07/13/2015 06:02 PM, Phil Edworthy wrote:
Instead of statically selecting the PHY connection to either the
USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
dts to specifiy gpio pins for the vbus and id signals. Additional
These GPIOs don't have anything to do with th
On Mon, Jul 13, 2015 at 06:10:05PM +0900, Yoshihiro Shimoda wrote:
> The dma_map_single and dma_unmap_single should set "gadget->dev.parent"
> instead of "&gadget->dev" in the first argument because the parent has
> a udc controller's device pointer.
> Otherwise, iommu functions are not called in A
Hi Laurent,
On 13 July 2015 16:51, Laurent wrote:
> Hi Phil,
>
> Thank you for the patch.
>
> On Monday 13 July 2015 16:30:18 Phil Edworthy wrote:
> > These changes allow a PHY driver to trigger a VBUS interrupt and
> > to provide the value of VBUS.
> >
> > Signed-off-by: Phil Edworthy
>
> I d
> Commit 57ce61aad748 might be helpful... ;)
>
> Good luck,
> Frank
>
>
Pretty much the same thing I have done, except that I didn't notice that
0 = 512 :)
Apparently, 57ce61aad748 fell victim of a mass-revert caused by some
underdebugged issues. Is it known what they were? Is there any chance
Hi Phil,
Thank you for the patch.
On Monday 13 July 2015 16:30:18 Phil Edworthy wrote:
> These changes allow a PHY driver to trigger a VBUS interrupt and
> to provide the value of VBUS.
>
> Signed-off-by: Phil Edworthy
I don't see any further show stopper for this patch, so
Reviewed-by: Laure
These changes allow a PHY driver to trigger a VBUS interrupt and
to provide the value of VBUS.
Signed-off-by: Phil Edworthy
---
v6:
- Rename vbus_indirect_value to vbus_active
v5:
- Avoid race when vbus_is_indirect may or may not be read
before the phy has called vbus_session. In doing
Hi Laurent,
On 09 July 2015 02:03, Laurent wrote:
> Hi Phil,
>
> On Wednesday 08 July 2015 08:08:27 Phil Edworthy wrote:
> > On 08 July 2015 00:08, Laurent wrote:
> > > On Tuesday 07 July 2015 12:52:43 Phil Edworthy wrote:
> > > > These changes allow a PHY driver to trigger a VBUS interrupt and
>
Am 08.07.2015 um 12:51 schrieb Michał Pecio:
> This commit fixes the following issues:
>
> 1. The 9th bit of buf was believed to be the LSB of divisor's
> exponent, but the hardware interprets it as MSB (9th bit) of the
> mantissa. The exponent is actually one bit shorter and applies
> to base 4,
Hi Sergei,
On 13 July 2015 11:17, Sergei wrote:
> Hello.
>
> On 7/13/2015 12:04 PM, Phil Edworthy wrote:
>
> >>> Instead of statically selecting the PHY connection to either the
> >>> USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
> >>> dts to specifiy gpio pins for the vbus a
Hi
there is a cross dependency between the modules. xhci-mtk.ko requires
xhci.ko to be loaded. however this will look for xhci_mtk_add_ep_quirk()
which is part of xhci-mtk. the modules will build but are not run time
loadable.
John
On 08/07/2015 11:41, Chunfeng Yun wrote:
> MTK xhci host
On Mon, Jul 13, 2015 at 01:24:05PM +0300, Roger Quadros wrote:
> Hi,
>
> On 10/07/15 10:58, Li Jun wrote:
> > On Wed, Jul 08, 2015 at 01:19:26PM +0300, Roger Quadros wrote:
> >> Hi,
> >>
> >> This series centralizes OTG/Dual-role functionality in the kernel.
> >> As of now I've got Dual-role funct
Greetings my friend,
Good Day. I know this message might meet you in utmost surprise;
however, it's just my urgent need for a foreign partner that made me
to contact you for this mutual benefiting business when searching for
a good, reliable and trust worthy person.
My name is Musa Mohamed Ali, t
On 13.07.2015 09:39, Lars Melin wrote:
On 2015-07-13 12:44, Dirk Behme wrote:
Add support for USB descriptor 0x1199, 0x68AB.
Signed-off-by: Dirk Behme
---
drivers/usb/serial/sierra.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sier
Hi,
On 10/07/15 10:58, Li Jun wrote:
> On Wed, Jul 08, 2015 at 01:19:26PM +0300, Roger Quadros wrote:
>> Hi,
>>
>> This series centralizes OTG/Dual-role functionality in the kernel.
>> As of now I've got Dual-role functionality working pretty reliably on
>> dra7-evm and am437x-gp-evm. xhci side of
On 13/07/15 05:14, Peter Chen wrote:
> On Wed, Jul 08, 2015 at 01:19:33PM +0300, Roger Quadros wrote:
>> The OTG core instantiates the OTG Finite State Machine
>> per OTG controller and manages starting/stopping the
>> host and gadget controllers based on the bus state.
>>
>> It provides APIs for t
Hello.
On 7/13/2015 12:04 PM, Phil Edworthy wrote:
Instead of statically selecting the PHY connection to either the
USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
dts to specifiy gpio pins for the vbus and id signals. Additional
These GPIOs don't have anything to do w
Peter,
On 13/07/15 04:58, Peter Chen wrote:
> On Wed, Jul 08, 2015 at 01:19:30PM +0300, Roger Quadros wrote:
>> This is to prevent missing symbol build error if OTG is
>> enabled (built-in) and HCD core (CONFIG_USB) is module.
>>
>
> We may let the OTG-DRD/OTG-FSM depends on CONFIG_USB to fix it.
On 13/07/15 04:21, Peter Chen wrote:
> On Wed, Jul 08, 2015 at 01:19:27PM +0300, Roger Quadros wrote:
>> struct otg_fsm is the interface to the OTG state machine.
>>
>> Document the input, output and internal state variables.
>> Definations are taken from Table 7-2 and Table 7-4 of
>> the USB OTG &
The dma_map_single and dma_unmap_single should set "gadget->dev.parent"
instead of "&gadget->dev" in the first argument because the parent has
a udc controller's device pointer.
Otherwise, iommu functions are not called in ARM environment.
Signed-off-by: Yoshihiro Shimoda
---
This patch is based
Function ffs_do_functionfs_bind() calls functionfs_bind() which allocates
usb request and increments refcounts. These things needs to be cleaned
up by if further steps of initialization fail by calling functionfs_unbind().
Signed-off-by: Robert Baldyga
Acked-by: Michal Nazarewicz
---
drivers/us
Hello,
This patch set contains few small bugfixes found in usb gadget functions
and UDC drivers. The most important is the [1] as it fixes bug causing
BUG_ON() in f_fs driver. Remaining patches contain minor fixes.
[1] usb: gadget: ffs: call functionfs_unbind() if _ffs_func_bind() fails
Best reg
Add missing return value check. In case of error print debug message
and return error code.
Signed-off-by: Robert Baldyga
Acked-by: Nicolas Ferre
Acked-by: Michal Nazarewicz
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/u
Since maxpacket_limit was introduced all UDC drivers should use
usb_ep_set_maxpacket_limit() function instead of setting maxpacket value
manually. ep.maxpacket_limit contains actual maximum maxpacket value
supported by hardware which is needed by epautoconf.
Signed-off-by: Robert Baldyga
Acked-by
Function midi registers two interfaces with single set_alt() function
which means that f_midi_set_alt() is called twice when configuration
is set. That means that endpoint initialization and ep request allocation
is done two times. To avoid this problem we do such things only once,
for interface nu
Since maxpacket_limit was introduced all UDC drivers should use
usb_ep_set_maxpacket_limit() function instead of setting maxpacket value
manually. ep.maxpacket_limit contains actual maximum maxpacket value
supported by hardware which is needed by epautoconf.
Signed-off-by: Robert Baldyga
Acked-by
Hi Sergei,
On 10 July 2015 17:36, Sergei wrote:
> Hello.
>
> On 07/07/2015 02:55 PM, Phil Edworthy wrote:
>
> > Instead of statically selecting the PHY connection to either the
> > USBHS (Function) or PCI0 (Host) IP blocks, this change allows the
> > dts to specifiy gpio pins for the vbus and id
On Mon, 13 Jul 2015, Glasswall Information Point wrote:
> And to clarify the confusion about the modprobe story, and the keyboard.
>
> I know normally after disk drivers have been loaded by initramfs you can
> load modules for hid input.
>
> But is this case you cannot because off FULL-disk encr
On Mon, Jul 13, 2015 at 01:26:23PM +0530, Sumit Semwal wrote:
> Hi Peter,
>
> On 8 June 2015 at 14:02, Peter Chen wrote:
> > On Mon, Jun 08, 2015 at 12:37:00PM +0530, Sumit Semwal wrote:
> >> H Peter, Felipe,
> >>
> >> On 14 January 2015 at 06:56, Peter Chen wrote:
> >> > On Tue, Jan 13, 2015 at
Hi Peter,
On 8 June 2015 at 14:02, Peter Chen wrote:
> On Mon, Jun 08, 2015 at 12:37:00PM +0530, Sumit Semwal wrote:
>> H Peter, Felipe,
>>
>> On 14 January 2015 at 06:56, Peter Chen wrote:
>> > On Tue, Jan 13, 2015 at 10:18:02AM -0600, Felipe Balbi wrote:
>> >> On Tue, Jan 13, 2015 at 04:02:20P
On 2015-07-13 12:44, Dirk Behme wrote:
Add support for USB descriptor 0x1199, 0x68AB.
Signed-off-by: Dirk Behme
---
drivers/usb/serial/sierra.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 46179a0..4122e4f 100644
--- a
51 matches
Mail list logo
